Suzuki DRZ400 Chain Adjustment Complete Guide

Рет қаралды 9,800

MotoVentureNW

Жыл бұрын

In depth demonstration on how to adjust your chain on a DRZ400.

Пікірлер: 31

@GLHS592 24 күн бұрын

Great video. Great explanation. It's easier than I thought.

@toysandguns977 11 ай бұрын

Great video very informative! Thank you

@motoventurenw 11 ай бұрын

Glad it was helpful!

@goldmanstacks1445 4 ай бұрын

Great video thank you!

@kevinficzere3826 Жыл бұрын

Great vid. Thx!

@motoventurenw Жыл бұрын

You are welcome. Glad you liked it. Thanks

@SW-Video 4 ай бұрын

What is the correct freeplay adjustment? That's all I really need to know. (1.6-2") Thank you for showing a good way to do this.

@CoachSteve4u Жыл бұрын

Very helpful thank you! I know it's not easy to tmak a video. Great tip with the rag in the chain to snug it up. So, what kind of a bike stand should I get from Harbor Freight? I need to buy one.

@motoventurenw Жыл бұрын

It appears that harbor freight no longer carries the exact rear wheel stand that I'm using. I did find very similar ones on Amazon. The bike master branded rear stand on Amazon is the most similar to the one I'm using so look for that one.

@schubertdj 3 ай бұрын

Thank you, great video! Would you mind sharing the name of the skid plate you have on your DRZ in the video?

@lennox1393 11 ай бұрын

thanks alot🥰

@motoventurenw 10 ай бұрын

You're welcome 😊

@davidhartman7700 Жыл бұрын

Very informational video, would you be able to do this same video but for the SM version of the DRZ400 as that is the model I have. Unfortunately I haven’t been able to find too much on KZfaq for the sm model, it would be so very helpful! Thanks, stay safe out there!!

@motoventurenw Жыл бұрын

I would like to show the SM model adjusters on video, but I don't own an SM model. Sorry

@gregcallahan3410 Жыл бұрын

Great video. Very comprehensive. Lighting, editing, and sound are all very professional! I am a little surprised you do not address the wheel being on the ground versus being on the stand, as it may effect the chain free play ? Do you measure with the wheel on the ground, and adjust with it on the stand ? Or does it truly not matter ? Thank you.

@motoventurenw Жыл бұрын

The suspension is fully extended with the rear wheel on a stand (off the ground) or on the ground, so it really doesn't matter. Although, it's easier to do the job if the bike is on a stand upright. I've done it both ways.

@routeman8836 Жыл бұрын

The old chain has places of tightness and sag when you twist it, you must find place where chain stretched harder and this place be adjustment

@motoventurenw Жыл бұрын

excellent point. I knew that but didn't think to put it in the video. Thanks for bringing that up.

@user-ko5up6bf8e Жыл бұрын

Says it the manual to take ur measurements with the bike in the side stand.

@keldonator Жыл бұрын

This

@furiousgeorge00 10 ай бұрын

Agreed. If you adjust when the bike is lifted it will become tight when on the side stand or riding. (swing arm physics)

@Treeclimbingexpert 5 ай бұрын

So that is what those numbers are for. My chain was looser than yours holy crap I am lucky I didn't crash. Can you recommend a jack? Do I need a certain kind for the drz? How often do you need to do it?

@karnivore5846 Жыл бұрын

My 2023 drz400s manual says 79.5 ft lbs for the axel nut...any ideas why our numbers differ?

@motoventurenw Жыл бұрын

Hum, not entirely sure why the 5.5 ft lb difference. I can only guess that Suzuki updated some of it's manual specs or maybe they are using different type of axle nut on newer models. You could verify with the shop that you bought it at too. I would say follow your manual on what is says for your bike.

@karnivore5846 Жыл бұрын

@@motoventurenw👍

@SrgkillSrgkill Жыл бұрын

Having the adjusters in a pinch an couldn't keep bike level can you adjust with just the kickstand?

@motoventurenw Жыл бұрын

Yes, you can adjust it on while the bike is on the kickstand. It makes it a bit more difficult, but it can be done that way. Just make sure that the adjusters markings on both sides match when you are done.

@SrgkillSrgkill Жыл бұрын

@@motoventurenw it worked, it was risky i used a wooden stake under the right peg to barely get the weight off the right adjuster turned no problem the left I used a wrench to click it over

@dakotadunphy4734 10 ай бұрын

Skip to 8:00

@Treeclimbingexpert Ай бұрын

So just a fair warning to everyone I crashed because of this video. I did it just like he did in the video but the chain was too loose and it came off and I crashed. I am ok but the bike is not and yea. I don't blame the guy it my fault for listening. I have since learned that the chain need to be adjusted ON THE SIDESTAND. DO NOT ADJUST the chain on a rear stand. It will take the weight off the rear spring and give a false reading. Mine was good when I checked it but as soon as I started riding it loosened up a lot. Anyways everyone that is learning don't adjust ur chain on the rearstand.