Australia vs My 3D-Printed C1 Rig

Рет қаралды 2,614

2 ай бұрын

I'm done with my SCX10.3 JLU. And you can download it!
Before I retire this rig and start building a new Scale-1 project for 2025 WRCCA comps, I wanted to show you how this thing performed! Here are a couple of runs from the 2024 East Coast Crawl Fest from the end of April 2024, in south-east Queensland, Australia.
I also highly recommend checking out these runs from that same class, they're good watching:
Tom K's Course 2 attempt: • 2024 ECCF Scale-1 Cour...
Kyle's Course 1 attempt: • 2024 ECCF Scale-1 Cour...
Here are the others that I got on camera from my group: • 2024 ECCF Scale-1
--
Here are the parts in this build:
SCX10 III JLU Kit
Fusion 1800kv (BEC on 7.4v)
jxServo Brushless 7.4v servo
Stock gears, shocks, axles, chassis, drive shafts, front body, bumpers.
Pro-Line Trenchers with DIY 2-Stage foams
240g/wheel Brass Wheels
Orlandoo Sound Kit (via 6v BEC)
Flysky GT-5 Radio & BS-6 Rx
RC-TNT Hood Sticker!
Generic front axle brass, exhaust pipe, winch, roof rack (cut-down), trail tools, antenna, etc.
2200mAh 30C 3S Lipo
Download the parts files on rc-tnt.com in the Downloads section:
rc-tnt.com/project/scale-1-co...
Related Vids:
This rig's original review: • Best SCX10 III? The On...
My 2023 ECCF Round-Up: • 3 Days at Australia's ...
Lexan vs Hard Body: • A Comp Dilemma: Hard B...
Setting up a Scale-1 Rig: • Building a Scale-1 Rig...
And here's the previous video about this rig, which includes a link to where you can download the rear end I designed for the SCX10.3 JLU body: • Turning my SCX10 III i...
Rules I'm building to are on our club page:
melbournecompcrawlers.com.au/
And I made a handy Scale-1 quick check & handicap points tool, too!
melbournecompcrawlers.com.au/...
Join this channel to get access to perks:
/ @rctnt
Articles:
What's the Best RC Car? rc-tnt.com/guides/best-rc-car/
Best RC Crawler? rc-tnt.com/manufacturer/multi...
Follow us:
Website: rc-tnt.com/
Twitter @rctrailandtech and on Instagram:
/ rctrailandtech
WHERE TO BUY RC STUFF:
Buy kits, models & upgrades here: www.asiatees.com/shop-now?rc_...
Send money directly to people living in extreme poverty (lets combine our resources to help those most in need):
community.givedirectly.org/ca...
#rccrawling, #rcreview, #scx10iii, #compcrawlers,

Пікірлер: 63

@Andy_Yates 3 ай бұрын

Great to see more footage of the event! Looks like it was a fun time in pretty setting. Congrats again on taking the top spot! 🙌

@RCTNT 3 ай бұрын

Thanks Andy. It was such a great trip. Cheers

@doodlepugg 2 ай бұрын

Absolutely fantastic work, and well deserved first. That rig is mesmerising, and a credit to your skill & experience. Look forward to your next build for sure!

@RCTNT 2 ай бұрын

Thank you 😊 Felt good, eh

@derrickhays3627 2 ай бұрын

Great job all the hard work payed off👍 thanks for sharing.

@VS666 2 ай бұрын

Hey buddy, awesome job at the comp! Loved watching you problem solve those...problems... 😅😁 I just got your Ascent Fusion rework completed, man what an awesome project! I had a lot of fun putting that together and didn't have any major issues

@RCTNT 2 ай бұрын

Lol nice. My channel needs an inside joke. Looks like that... problem... might be solved. And awesome! I know things aren't perfect with that install and some fiddling is required, but that's great to hear! Thank you for the feedback and I really hope you enjoy driving it!

@michaeldorich4485 2 ай бұрын

Congratulations on your win. Your truck looked great and ran the course very well. Your driving was excellent.

@RCTNT 2 ай бұрын

Thanks Michael, it was a really fun comp. Can't wait for the next one!

@YARCWest 2 ай бұрын

I've been waiting on the results and footage, great job!

@MrCveedub 2 ай бұрын

Well done on 1st place, Craig!

@HorslONE 2 ай бұрын

I love this build!

@MysticRiverRC 2 ай бұрын

Masterful driving! Bravo!

@pandacrawler6x6 2 ай бұрын

A nice and great Ideia to share !!! 🎉Congrats for the 🏆 and the Kind share to all of us. 🐼🥇🐻‍❄️👌🏻

@AnyAssumptionBanter 2 ай бұрын

Great vid of the comp. It's amazing rig. It looks so big and unstable like it'll fall over and moment but its composed. It further makes me realize how important geometry is over ascending ability which só many rtr fans focus on.

@RCTNT 2 ай бұрын

Haha yes! That's right! And thank you 😊

@BillsWorkbench 2 ай бұрын

Well done!

@pocketfuloducks1062 2 ай бұрын

Great footage!

@RCTNT 2 ай бұрын

Thanks, we got a lot from the comp Was such a great long weekend

@WestyCoastHermit 3 ай бұрын

I love the footage of your run. You looked very calm and cool as you were driving. Well done sir! Your JLU did great and it "retires" a champion. Good job Jeep! That's great that your club is hosting next year. Long road trips are amazing, but so is sleeping in ones own bed. Take Care!

@RCTNT 3 ай бұрын

Thanks Chris! It was such a fun 3 days. I've been missing it since I've gotten home! We'll still be camping next year, the location is still 2.5 hours away, but it's still technically "local" to us. Should be a ripper :) Now I've gotta get a move on designing the new hard body. Think I'll go from scratch. Should be interesting!

@WestyCoastHermit 3 ай бұрын

@RCTNT Oh I see. So no bed but camping and crawling sounds perfect. I look forward to seeing what body you design for next year's comp. You're sure getting your money's worth from your Bambu!

@RCTNT 2 ай бұрын

I bought a second P1S, now it does TPU and other non ams materials, while the other P1S runs PETG and pla+ on a bigger nozzle. Good combo and it's greatly improved my prototyping speed. Now big projects are possible!

@WestyCoastHermit 2 ай бұрын

@@RCTNT That's a nice setup!

@RCTNT 2 ай бұрын

I'm grateful for it. Had a power outage last night for 2 hours. Not unusual in our semi-rural area. This morning, the printer was still stopped where it was cut off last night, but powered up and in a paused state. I pressed Play and it went on with the job and finished flawlessly. It's just so impressive. (I know other printers do this too, but whenever it happens during a long print, and recovers well, it's just very gratifying!)

@roblowrie1969 2 ай бұрын

Nice job on the first place. Thats such a nice looking rig, well done. 😎👍🏻

@RCTNT 2 ай бұрын

Thanks Rob! It was very satisfying after the work that went into it!

@roblowrie1969 2 ай бұрын

@@RCTNT are you going to use the SCX10 as the base for the next build?

@RCTNT 2 ай бұрын

Nah, I'm leaning toward a full diy chassis. Still thinking it over.

@roblowrie1969 2 ай бұрын

@@RCTNT looking forward to whatever you do. Cheers. 👍🏻

@RCTNT 2 ай бұрын

Haha me too, me too!

@brianmassey7563 2 ай бұрын

nice run! I can't imagine being able to comp on all rock.

@RCTNT 2 ай бұрын

We use the best spots for the biggest comps. Some comps have dirt, sand, mud, etc. too, but a river or ocean side rock area is just tops for crawlers!

@verpine3534 2 ай бұрын

Congratulations on 1st in Class 1! I'm looking forward to watching your build videos for the 2025 comp! Do you ever participate in 1/24 or 1/18 comps? I'd love to see those, or at least build videos if you decide to. Cheers!

@RCTNT 2 ай бұрын

Never done one, but we're in talks in our local club now to experiment with a day for it, and to go from there. I've got a few builds in progress, too. They'll get camera time in the not-too-distant future. Cheers :)

@JT-np1op 2 ай бұрын

Good job on 1st! I just built a Gmade Spider and CrossRC demon SR4C full metal edition. They were on sale here in the states

@RCTNT 2 ай бұрын

Oh nice! I'd love to buy a Spider but can't get one for less than USD$485 delivered, so I've not been in a hurry on that model!

@JT-np1op 2 ай бұрын

I was able to snag it for 349$ usd!

@chrisvda7277 2 ай бұрын

What happened to the sct shootout. Was looking forward to seeing how the Hobao SC10 compared.

@RCTNT 2 ай бұрын

Still coming. I'm balancing a lot of content and the biggest time of year for crawling has just passed, so there's a bit to get through. I've got a conga line of SCTs here still awaiting their turn on camera and the Hobao is next.

@James-bristol 2 ай бұрын

Hi love watching your videos,looking at buying a builders kit which ones would you recommend…. Cheers

@RCTNT 2 ай бұрын

Hi James, what do you want to do with it? Gonna need some specifics here. Trail? Performance crawling? Scale? Towing? And what's the budget? What country are you in? Is it going to be your first build? Answer these and I'll give you my best ideas :)

@James-bristol 2 ай бұрын

@@RCTNT hi I’m in the U.K.,terrain wooded and rocks ,so more crawling than trailing,not scale ,built the Gmade bom,trx4 sport kits just fancy something new

@RCTNT 2 ай бұрын

@@James-bristol ok gotcha. Cross RC is probably what you're after. The EMO XT4 is worth a look, as is the EMO AT4 or JT4 (or 6, I guess).

@James-bristol 2 ай бұрын

@@RCTNT cheers thanks will look into them

@Bazil787 2 ай бұрын

hey man i was just wondering if there were other crawler events in Austrlaia focused on more scale stuff?

@RCTNT 2 ай бұрын

They come and go. The scene got quite busy for a while and then since covid it has been more quiet. But MelbourneCompCrawlers.com.au is chuffing along nicely (our next comp is mid June down south), while a few other Melbourne based FB groups are also busily doing their thing with social runs and so on (plus others like Victorian Wild West Crawlers also around Bendigo/Ballarat/Geelong areas). The QLD club is busy (SEQRCC). Newcastle club has started up (Hunter Valley Comp Crawlers). WA is up and down but there are definitely people active in the scene there. I also know the Coffs group is busy. But it depends where you are. Look on Facebook for 'crawlers' and find a bunch of like-minded people in your area and meet up and drive, basically!

@Bazil787 2 ай бұрын

@@RCTNT thanks i was looking for more like scale driving where theres no compatition just trails and stuff with othere people that also love scale.

@RCTNT 2 ай бұрын

All of the above apart from my club and SEQRCC is the answer to your question, in that case. The FB groups are socially quite active, generally.

@Bazil787 2 ай бұрын

@@RCTNT ok thanks man, i love you videos!

@christianrambissoon1141 2 ай бұрын

What does your channel name stand for, RC TNT? Maybe you've told us before and I missed it.

@RCTNT 2 ай бұрын

It's in the About section of the channel, and in my social media tags: RC Trail and Tech . I capitalised the N in 'and' because it sounded better than RCTT 🙂

@christianrambissoon1141 2 ай бұрын

@@RCTNT Reading is a helluva thing, haha.

@RCTNT 2 ай бұрын

Meh, we don't come to youtube to read tho! All good 😅

@adamwillby 9 күн бұрын

What system do you guys use for scoring where everyone can see the scores online?

@RCTNT 9 күн бұрын

It's an internal system developed by the WRCCA guys and shared with the clubs that follow that rule set. Login not needed to see scores and each club can adjust their rules/scoring to suit, within limits. It's pretty good.

@adamwillby 9 күн бұрын

Hopefully, that trickles its way down to more comp styles. I come from a racing background, and we always had LiveRc pulled up on our tablets to keep tabs on the heats. I always thought a setup like that would be amazing for crawling comps. No score sheets needed. Could be displayed on a TV in the hobby shop while comp is live.

@adamwillby 9 күн бұрын

Wrcca isn't the as common in the states unfortunately. I still have my sporty and pro but only comp them once or twice a year.

@RCTNT 9 күн бұрын

@adamwillby that is already possible, yep. So much better than paper! You've got me thinking about making a front end for the comps now though. A nice all-in-one display page for whatever comp, nicely formatted for spectators. I'll have to think about that!