New subscriber... Nice to finally see a Nigerian that knows the device and knows how to use it... Will learn alot from this channel am sure
@DIYAutoworksNG3 жыл бұрын
Thanks for the compliment. Welcome onboard!
@maadenengineering91012 жыл бұрын
Very informative
@DIYAutoworksNG2 жыл бұрын
Many thanks. Really appreciate the comment.
@dovialex60617 ай бұрын
Thanks for your help❤
@DavidGutierrez-zi4dy2 жыл бұрын
excellent thanks
@DIYAutoworksNG2 жыл бұрын
You're welcome
@chrissweeting1609Күн бұрын
Any video on programing 2004 merc s500 trunk open and close programing
@DIYAutoworksNGКүн бұрын
Unfortunately not.
@rajenmorjaria70075 ай бұрын
Hi. Firstly thank you for making this video. Can this (or another that you can reccomend) activated the adaptive cruse control on the EQC-400? It is absurd that even on the amg plus 2023 model this feature is not offered as standard.
@DIYAutoworksNG4 ай бұрын
Thanks for the compliment. I'm honestly not sure. You may want to check Autel's function coverage list for moe autel.com/vehicle-coverage/coverage2
@user-nz5wn9jn6h2 жыл бұрын
Hello, I have such a device. I need to know how to replace the diesel injector calibration code or code
@DIYAutoworksNG2 жыл бұрын
I am yet to hook this up to a diesel vehicle! You've just reminded me to visit one of my friends who has a diesel car. 😂
@TigredelMar773 ай бұрын
What do you think of the Autel MaxiPRO MP900-TS? seems to me like is an updated version of this one?
@DIYAutoworksNG3 ай бұрын
Yep, updated version. Better hardware.
@dovialex60617 ай бұрын
I have autel maxipro mp808ts scantool but I don't have access to all functions
@kurdmap77 Жыл бұрын
Thank u a million can i remove tune for dodge charger or chalanger if RPM upgraded i wanna back to factory RPM .
@DIYAutoworksNG Жыл бұрын
Thanks! Yet to try this on a Dodge. Can't say unfortunately.
@kurdmap77 Жыл бұрын
Why Under 2018 not above
@thunderball7799 Жыл бұрын
Need help troubleshooting an 09 E350 Wagon with rear airmatic and electrical issues. I replaced the air pump, rear bags and rear level sensor with no change to the sagging rear. Additionally, passenger side headlights work but the drivers side does not. It runs and drives other than these issues Watched another KZfaq video that it could be a bad Front SAM unit. Is this scanner capable of backing up my original SAM code settings so i can restore the settings to a replacement SAM unit ?
@DIYAutoworksNG Жыл бұрын
Hey, I don't have a Mercedes to hand to check this currently, however, coding for the SAM unit is supported. See autel.com/vehicle-coverage/coverage2 It doesn't specifically list anything against SAM unit backup. You may want to reach out to Autel directly if that's the principal reason for acquiring the tool. They'll be able to give a definitive answer.
@eliasrodriguezjr91572 жыл бұрын
Same model device but mine doesn't show the programming option.
@DIYAutoworksNG2 жыл бұрын
Just some quick questions... Did you follow the same steps showed? What model of Benz is it? Is your tool up to date in terms of Benz updates?
@flobencracaku2212 Жыл бұрын
please help me...I installed a sbc abs pump for mercedes benz w211 and I want to register the new pump..what should I do? coding or programming.. I heard that the vin number must be adjusted with the new pump.. you can do this procedure with autel mp808bt
@DIYAutoworksNG Жыл бұрын
I imagine programming. I didn't see the W211 specifically listed on the coverage tool, autel.com/vehicle-coverage/coverage2 . But you can ask Autel directly.
@Mlive7222 жыл бұрын
I have w218 cls mercedes will it work with airmatic calibration?
@DIYAutoworksNG2 жыл бұрын
Just checked Autel's tool coverage page for the MP808TS and it lists support for level caliberation for the adaptive dampening system. You can check here autel.com/vehicle-coverage/coverage2. You may also contact Autel for confirmation beyond a doubt.
@eseparanoiac2 жыл бұрын
This function is possible with MP808 basic no ts? thanks
@DIYAutoworksNG2 жыл бұрын
Yes.
@motosmart30323 жыл бұрын
Cool video, I have a similar device, but from the video there's coding/programming access on the app, do you think there'll be an update that would allow for update/upgrade/programming of ECUs?
@DIYAutoworksNG3 жыл бұрын
Thanks a lot! I do not see an update that will allow programming coming to the MP808TS because it does not support the connection of a passthru device. These are external devices needed for programming.
@cransaftvalve734 Жыл бұрын
I bought the Icarsoft CR Max BT scanner for my Viano 2.2 163cv 2014. It didn't read many options and it didn't connect correctly. It has a Delphi CRD2.x control unit. Is there a scanner that can read more data from the control unit. I read that these Delphi are somewhat problematic.
@DIYAutoworksNG Жыл бұрын
From the comment of another user, it seems not many scanners support Viano. Not sure how much coverage Autel has either😑
@cransaftvalve734 Жыл бұрын
@@DIYAutoworksNG ohh, thanks.
@gloryboy8204 Жыл бұрын
Hello I have the autel mp808bt and every time I go to code my Mercedes it tells me coding can not be carried out. Do you know why this would be happening??
@DIYAutoworksNG Жыл бұрын
Not sure. What Mercedes are you trying to code?
@okparasamson79842 жыл бұрын
Hello sir, can this device code a Mercedes Benz abs module after replacement?
@DIYAutoworksNG2 жыл бұрын
If I recall, the tool offered me the opportunity to code all the modules in the car. That said, a replacement ABS may likely need programming first to write the VIN of the car into the module. Not all manufacturers put in this requirement, but some do. I am not sure if Mercedes does. Some car modules are plug and play.
@dovialex60617 ай бұрын
I have configuration but I don't have programming option
@DIYAutoworksNG7 ай бұрын
Did you follow the exact menus I went through as in the video?
@vw_mods_47112 жыл бұрын
Anyone know if this can tell my van it now has 6 gears instead of 5 after a conversion from a better spec vehicle, cruise control only works up to 5th gear and when I put it in 6th the display goes blank Vw transporter t5.1 2011 many thanks
@DIYAutoworksNG2 жыл бұрын
I just checked Autel's tool-vehicle coverage site and it lists that the MP808TS covers coding for the transmission module of your VW. It does not give further details on the level of coding that can be done for the transmission. I would say that it depends on whether the upgraded transmission you fitted is an option for this car and if Autel specifically built in coding for this switch for your car in the tool. Is the transmission you put in an option for the 2011 transporter? If not, what you actually need is a new transmission module properly programmed and mapped to the new transmission plus the engine ECU.
@vw_mods_47112 жыл бұрын
@@DIYAutoworksNG wow!!! thank you for the reply. I have tried so many things and garages. The 6 speed is a factory option, but when buying used, makes them rare as most people just get the 5 speed as many are work vans The transmission came from a 2013 California transporter that was rear ended.
@DIYAutoworksNG2 жыл бұрын
I see. So the 2011 doesn't have a 6-speed factory option?
@vw_mods_47112 жыл бұрын
@@DIYAutoworksNG sorry yes it does my message is confusing, I have a low line transporter this is the most basic one, they can have so many options from factory, but mine was the lowest of the low ex builders
@DIYAutoworksNG2 жыл бұрын
If it does have the 6-speed as an option, there could be a function for coding. At this point, only Autel tech can say if this functionality exists, or having the tool and car at hand to explore the coding menu...
@mornebosman8259 Жыл бұрын
Do you perhaps know which cheaper version of a Autel will be able to do this coding
@DIYAutoworksNG Жыл бұрын
MP808 is the cheapest Autel with coding capability, if I'm not mistaken.
@mornebosman8259 Жыл бұрын
@@DIYAutoworksNG Thank you
@DIYAutoworksNG Жыл бұрын
👍🏼
@WV591 Жыл бұрын
Does it do ECU coding for few cars or many cars and is it disabled if not updated after free update ends?
@DIYAutoworksNG Жыл бұрын
Does ECU coding for Benz, Land Rover, Audi, VW, Porsche, and some others. You can ask Autel support if you have a specific model or make in mind.
@popoolabolu70822 жыл бұрын
Can this machine reset my airbag on glk,it got into a accident and the airbag deflated
@DIYAutoworksNG2 жыл бұрын
The repairs will need to be made first, crash data in the airbag module cleared (using special tools), before this can reset the airbag light. Here's a video I did on the approach to fix car SRS after an accident. kzfaq.info/get/bejne/lb9lhJdjrsDSn30.html
@LARSDIAGAUTO Жыл бұрын
Yes
@ebuks4ever2 ай бұрын
Ive had the MP808TS for 5yrs and didn't know the capabilities. Do you have a training resource or a link i can get one?
@DIYAutoworksNG2 ай бұрын
Hey. Oh! I don't actually have any compiled training resource. Still have the manual? A good place to start....
@ebuks4ever2 ай бұрын
@@DIYAutoworksNG My manual is nothing to write home about. did not help at all
@swank19752 жыл бұрын
So do you know if this Autel MP808 can code things like new gear selector modules or transmission or engine ECUs. I'm specifically trying to buy 1 tool that will allow me to work on my 2017 BMW M240IX and my wife's 2015 Landrover LR4. Her gear selection module is acting up and I've heard a replacement has to be programmed to the car.
@DIYAutoworksNG2 жыл бұрын
For specific precise requests like this, it's better to reach out to Autel support with your VIN to see if those services will be supported.
@valuquest1390 Жыл бұрын
Great video👍🏼Can you suggest an affordable scanner that will read and clone a Bosch ME 9.7 to a used EXM with tge same part # ???
@DIYAutoworksNG Жыл бұрын
I haven't done this before, but from what I can see it seems like a function for high end scanners using accessories e.g. Autel IM608 plus the G box. There may be cheaper options, I just don't know.
@bracketracer Жыл бұрын
I'm currently trying to do an ECU swap on an 06 E350 with ME 9.7, and can't find a function to do this on an Autel 908 Elite either.
@repnatl3 жыл бұрын
Does this allow programming new keys and fob or program a used ecu to the vehicle vin?
@DIYAutoworksNG3 жыл бұрын
Yes on all counts. However it depends on the vehicle. As you may know, no scanner supports all functions in all vehicles. You can use this Autel link to check function coverage by tool by car... autel.com/vehicle-coverage/coverage2
@okparasamson79842 жыл бұрын
Does it do smart keys?
@DIYAutoworksNG2 жыл бұрын
Good question. This is something I'm still investigating...
@DIYAutoworksNG2 жыл бұрын
@Okpara Samson - Good news! As you may have seen from the video this week kzfaq.info/get/bejne/ab-PrbNkr6-3aaM.html, it does do smart keys. Will be good to check by vehicle though. I have confirmed smart keys for Honda.
@richmondarthur36093 жыл бұрын
Please i have the same diagnostic tool and I don't know how to go about, I need help
@DIYAutoworksNG3 жыл бұрын
I recommend just going over the manual religiously and having some handson time. Try not to do things you don't understand. You may also find the several videos I've done on this tool helpful. Particularly, the initial detailed review as well as the TPMS review. Links below: General review - kzfaq.info/get/bejne/fNGSZa56vL3bXWg.html TPMS review - kzfaq.info/get/bejne/iqmhn9Fqzc7Ik2Q.html
@richmondarthur36093 жыл бұрын
@@DIYAutoworksNG thanks
@CloudKim5 ай бұрын
how can you lengthen the period distronics (auto cruise) continues without me touching the handle? also, how can you make the car change lanes when i switch the turn signals?
@DIYAutoworksNG5 ай бұрын
Honestly not sure. I usually don't go into the weeds on the transmission coding. Your last query will have to be model dependent.
@RoadHeros6103 жыл бұрын
Question is the autel capable of cloning or reprogramming a ecm .. I think I have a bad ecm
@DIYAutoworksNG3 жыл бұрын
Generally, this Autel is capable of replacing the ECM I.e., writing your old VIN into the new ECM. However, you need to be doubly sure your car is supported with this function. What car is this? I can check if you state the make, brand & year.
@RoadHeros6103 жыл бұрын
@@DIYAutoworksNG 2003 Mercedes e500 w211
@RoadHeros6103 жыл бұрын
@@DIYAutoworksNG 2003 Mercedes e500 w211
@RoadHeros6103 жыл бұрын
car has a gremlin fan coming on at cold start I'm getting no communication with ecm p0600 instrument cluster and other functions go on and off from time to time
@DIYAutoworksNG3 жыл бұрын
I didn't see ECU replacement clearly stated for this car. That said, it will be good to rule out the other causes of a P0600. It could be a ground/poor contacts issue. I would say you inspect the connectors for the ECU for corrosion/bent pins/dust, inspect the wiring harness to rule out short/opens. Also, what voltage is your battery at? One of the causes of a P0600 is a weak battery. It's possible that the gremlin fan drains the battery to the point where the electrics don't work correctly. You may have to borrow a charged healthy battery to rule this out.
@a.o.20582 жыл бұрын
Is it possible to code the high beam assistant on the w212 with it or activate the "last mode" for the start stopp automatic?
@DIYAutoworksNG2 жыл бұрын
The only options under headlight coding were those shown in the video. Not sure what the last mode means. I recall that you can turn Start-stop on or off using thr device.
@a.o.20582 жыл бұрын
@@DIYAutoworksNG If you set the automatic start stop to off and turn off the engine, the automatic start stop will be on again the next time the engine is started. The last mode is not saved. That can be changed. I have the hardware for the high beam assistant installed, but it is not coded. This can be coded for example with vediamo.
@DIYAutoworksNG2 жыл бұрын
I get you now. Unfortunately, I haven't had the opportunity to 'play' with the W212 using this device. So I can't really say, but I believe coded parameters should not revert to status quo when the car is restarted.
@AhmedAhmed-xg6iz2 жыл бұрын
Can I edit the source code by this i mean the real c code
@DIYAutoworksNG2 жыл бұрын
Do you mean writing a new code for the software, like a code stack? No.
@Dnasty12 жыл бұрын
Is this the cheapest way to code a mercedes ecu? I just want to disable my daytime running lights/fog lights but seems like its much harder to do this stuff on benz than bmw.
@DIYAutoworksNG2 жыл бұрын
Well, I can't say for cheapest. The tool is close to a thousand bucks US.
@Dnasty12 жыл бұрын
@@DIYAutoworksNG yea I haven’t been able to find anything for less that gives access to the mb ecu.
@DIYAutoworksNG2 жыл бұрын
I see.
@jalis812-gaming62 жыл бұрын
You can disable daytime running lights in the car settings through menu, I can do that on my mercedes.
@sotirispastromas54502 жыл бұрын
The md806 pro does not do complete translations. Bad support.
@DIYAutoworksNG2 жыл бұрын
I see. I have no experience with the MD808PRO
@matejgr.88792 жыл бұрын
Did you buy it from aliexpress or amazon?
@DIYAutoworksNG2 жыл бұрын
I actually got this through an authorized dealer who got it from Autel in China. I hadn't started buying from Aliexpress at the time. However, I did get my AP200 from Aliexpress. After I learnt the ropes. Lol.
@matejgr.88792 жыл бұрын
@@DIYAutoworksNG So is it safe to buy from aliexpress? i saw the mk808 and it says autel official store its on sale for 470$ .
@DIYAutoworksNG2 жыл бұрын
Yes, it is. I can't vouch for all sellers on the site though. You know how you have some funny sellers even on Ebay. I have some Aliexpress links in the description of some videos. These are genuine. It's actually the Autel official store. But feel free to verify or look for other authorized distributors there or elsewhere.
@matejgr.88792 жыл бұрын
@@DIYAutoworksNG thank you for help.
@DIYAutoworksNG2 жыл бұрын
You're welcome!
@dovialex60617 ай бұрын
Can someone help ?
@user-qp5xt2zz7y Жыл бұрын
I really need to no this, can someone please help me
@mplscarsales66522 жыл бұрын
Does this do ECU coding ?
@DIYAutoworksNG2 жыл бұрын
Yes, as demonstrated. Depends on the manufacturer. Not all manufacturers have coding enabled.
@ponasfeliksas5299 Жыл бұрын
Dude, its literally written in the title
@bartman3489 ай бұрын
Hi I did a factory reset as you did but now it won't connect to my wifi even when I put in the password atuel mk808bt
@DIYAutoworksNG9 ай бұрын
Have you tried a different WiFi? Did you make a backup?
@fishingwithadrian754 Жыл бұрын
Can you use this scanner to disable the rear o2 sensors? (After the catalytic converter)
@DIYAutoworksNG Жыл бұрын
Do scanners support that? Considering the critical role of the downstream O2 sensor. Haven't checked, but don't think the MP808TS does.
@DelFam2011 Жыл бұрын
@@DIYAutoworksNGwhy is it 'critical'? All it does is check efficiency of the cats. The upstream O2 sensors are certainly important.
@DIYAutoworksNG Жыл бұрын
I meant critical from the point of saving the planet 🌏. Not sure emission laws will allow manufacturers (cars and scan tool), to build in this support if you know what I mean.
@fishingwithadrian754 Жыл бұрын
@@DIYAutoworksNG for performance reasons like going catless.
@DIYAutoworksNG Жыл бұрын
Totally, understand
@paulopalma-condesso8206 Жыл бұрын
Hello, can you tell if this scanner can be abble to make an diagnostic in hybrid 2014 eclass Mercedes-Benz car? I'm looking for the best vs price multimark tool for my own park cars. All are European mark. I will appreciate your opinion. Thanks
@DIYAutoworksNG Жыл бұрын
It should, but for certainty, you can review the coverage through Autel's tool autel.com/vehicle-coverage/coverage2
@paulopalma-condesso8206 Жыл бұрын
@@DIYAutoworksNG thanks for the link.
@don.timeless499310 ай бұрын
is ECU coding includes updating ECM & TCM?
@DIYAutoworksNG10 ай бұрын
No. Coding doesn't update software.
@fokissmike374611 ай бұрын
Can you code Honda ecu’s?
@DIYAutoworksNG11 ай бұрын
No
@georgeanddaddecker7563 Жыл бұрын
Can you remove the top speed limiter or raise it higher?
@DIYAutoworksNG Жыл бұрын
If I recall, you can get to the top speed indicated on on the speedometer 260mph, I think
@georgeanddaddecker7563 Жыл бұрын
@@DIYAutoworksNG Does not work, it will go to 155 mph/260 kmh bit that is standard default. It is capable of 180-190mph unrestricted. Just need to remove top speed limit.
@makimaki4603 Жыл бұрын
Milage correction?
@DIYAutoworksNG Жыл бұрын
Nope, at least for Mercedes.
@bpoirier20022 жыл бұрын
I’m wondering , does the MP808BT , M808K, and other Autel scanners have the ability to code and program like this? Also, right near speed limiter I saw AWD. Is this just to code it at the factory, or can you disable AWD if you have a 4matic?
@DIYAutoworksNG2 жыл бұрын
Hello. The MP808BT and MP808K will both code like this. There are some coding options under AWD but I not sure if disabling of AWD is one of them. I used Autel's vehicle coverage tool but it doesn't specifically confirm this. autel.com/vehicle-coverage/coverage2
@bpoirier20022 жыл бұрын
@@DIYAutoworksNG thanks! Do you have any experience with the Icarsoft CR Max? Wondering if that one has any ECU coding and programming options, as well as TPMS. So many Autel models to pick from, I have no clue of the difference between MX, MK, DS, MP etc!
@DIYAutoworksNG2 жыл бұрын
No experience with the iCarsoft unfortunately. I've responded to the differences in my other reply. Only the DS and MP line are active scan tools.
@bpoirier20022 жыл бұрын
@@DIYAutoworksNG thank you, I appreciate the help!
@kastrizzle2 жыл бұрын
Hello, nice video there. I own a W211 E320 and I'm in the market for a scan tool that is affordable/ capable and the Mk808 is what I have been looking at recently. I would like to get your take on this scanner with specifics on its capabilities and the issue of subscription.
@DIYAutoworksNG2 жыл бұрын
Thanks, Peter. The MK808 is a good service tool. Has a number of maintenance functions. Only thing to point out is that it lacks bidirectional capability (just in case its a priority). Bidirectional capacity is not a must though. The MK808 will not give you the coding I demonstrated in this video, but it's a good tool as I said. Regarding updates and subscription, you may check out this earlier video I did on what to expect when you are out of subscription on Autel devices. kzfaq.info/get/bejne/gsiaqK6hlti9iHU.html If on a budget, you may also do some due diligence around the XTOOL D7 which I've reviewed here kzfaq.info/get/bejne/aK53maSX1tnFf3k.html I haven't played with it on a Mercedes though. All the best!
@kastrizzle2 жыл бұрын
@@DIYAutoworksNG Thanks.
@kastrizzle2 жыл бұрын
@@DIYAutoworksNG I just saw the video, another nice clip but I seem to prefer the build and asthetics on the autel. Any idea what happens to the Xtool D7 after the expiration of the free updates? Can the functions previously downloaded still be used or does the device turn into a slate?
@DIYAutoworksNG2 жыл бұрын
I agree with preferring the build of the Autel. On the D7, functions will remain active but you won't be able to download updates.
@user-ky7ty3ie1x Жыл бұрын
Hi my ecu got stolen bought second hand vivaro b how do i code
@DIYAutoworksNG Жыл бұрын
You can start by checking whether this device codes Vauxhall, specifically the vivaro. Here's Autel's coverage page autel.com/vehicle-coverage/coverage2
@markpasieka9 ай бұрын
other than reading English text , what did you teach us? what a waste of time.
@MrDevelishBoy Жыл бұрын
Mileage rewinded -500k. 🙈🤦♂️😂😂😂😂
@DIYAutoworksNG Жыл бұрын
🤣 Though that's not something I think you can do via coding with this tool.
@MrDevelishBoy Жыл бұрын
@@DIYAutoworksNG this tool or another tool but mileage rewinded 500000!