Thanks for the help, you solved my problem, could not connect according to the schedule
@sas84037 ай бұрын
is it possible for all windows to close together, rather than one by one.
@Mazda626GF7 ай бұрын
No, that will overload the electrical system at some point. It is even written in the car's user manual, to open/close one window at a time only. I know you can close all of them manually, but there is a reason why the manufacturer say not to do it - it won't last much.
@TatzzmTatzz Жыл бұрын
Dude great video like the way u explain everything you should be a teacher A+++
@user-rj1cj1gj2z3 жыл бұрын
The window next to my driving is a safety window module. In another video, I found the + signal on the window module pcb and soldered it. Is it correct?
@MessiRoman-yb7sz Жыл бұрын
hello, good morning, could you write in Spanish how to install the glass module where each cable goes because I don't get the option to translate your explanation for the mazda 626 gf clearly if it is easy for you to do it through Google translator 
@user-rj1cj1gj2z3 жыл бұрын
What I am curious about is that there is an auto up/down function on the side window of the driver. Is the connection method the same as the rear window? Unlike other windows, the window next to the driver operates on -signals. The + signal is transmitted from the module, so I wonder if there is another connection method. Did you understand?
@Mazda626GF3 жыл бұрын
On the Mazda 626 (and many other Mazdas) all 4 window motors get GND on both terminals and 12V is send instead of ground to one of the terminals when someone operates the switch. When operating driver side window, the module sends 12V so he can regulate Auto up/down feature. When operating other windows, buttons are actually purely mechanical and they disconnect the GND and pass 12V instead to desired direction.
@helmil017 Жыл бұрын
안녕하세요. 저도 이제품 설치를 했는데 작동을 안합니다. 연결이 제대로 안되었을 가능성이 있는부분이 갈색선, 갈색 화이트 선의 용도 입니다. 갈색 선 또는 갈색/화이트 선은 어디에 연결 하는지 헷갈리네요. 도어 락/언락 인지 윈도우 락/언락 인지 모르겠네요. 도어 락/언락 이라고 가정하면 차량이 긍정신호를 받는지, 부정신호를 받는지 팍악후 갈색선 또는 갈색 화이트선 중에 하나만 연결하는지요? 아래의 다른분의 답글을 보면, 녹색/검정색: 도어 잠금(-Signal) 연결 녹색: 도어 잠금 액추에이터(+시그널) 연결 이 맞는 궁금합니다. 참고로 녹색(갈색), 녹색/검정색(갈색/흰색) 이라고 보시면 됩니다.
@DestraAmni2 жыл бұрын
Nice..
@muhammadsharulnorman33523 жыл бұрын
Hello, I just buy this module .. for 20 second trigger purple wayer must goes where ??
@Mazda626GF3 жыл бұрын
It was supposed to be for the sunroof, but on my module it is not working as elements are missing within the module.
@YasirKhan-xg4xy3 жыл бұрын
Hi i am trying to install this unit in civic 2012 with sunroof. Is there any video available?
@Mazda626GF3 жыл бұрын
Hello. Unfortunately I'm only an enthusiast and I own Mazda 626 GF and recently Mazda 2 DE. I have no knowledge of Honda. What I can tell you though is that this module does not support sunroof, even tough it claims it does. I believe I cover why in this video.
@ZeeSuzukiEvery3 жыл бұрын
Hey brother first of all. A good video, nicely explain. I have same module with same process. I installed it in my car. Actually its a japanese van. Everything is running smooth except this the Auto window roll up is not working when i close the driver side auto window up it only work manually but not automatically. What will be the solution. Module is working perfectly. Just this the auto window up with the button is.not working. Any idea ?
@Mazda626GF3 жыл бұрын
Hello. Most likely car's module is working the way that Mazda 6 module is working and loses memory when disconnected from power. You need to search for the service procedure to re-program/re-learn the power windows of your vehicle. Unfortunately, if I'm correct, you'll have exactly the same issue with the new module as I explained in the description (I found it after shooting the video). I already have a fix for that, but don't know if it'll work for other brands. I'll update the description soon with schematics for the fix.
@ZeeSuzukiEvery3 жыл бұрын
@@Mazda626GF Might be. But my Module is working fine. Windows are rolling up as the way it should be. The only issue is my driver side Auto button when i pull it for auto roll up while driving or sitting in the car, it doesn't go up automatically. So i have to pull it till it reaches up.
@Mazda626GF3 жыл бұрын
Yep, same on the 6. Fixable by opening the window all the way down and holding button to down at least 2 seconds after window has reached bottom. Then the same for up - pull the button until window reaches top and keep pulling for at least 2 seconds. After that auto is working, but it'll break after closing the windows with the new module. This is probably why you think module is working fine - your auto is not working. Fix the auto and then lock the vehicle with windows opened, after which check your auto. If I'm correct, it won't work again and you'll need to fix it again... Procedure for fixing auto should be in the user manual of your vehicle, as auto will break when you remove your battery
@ZeeSuzukiEvery3 жыл бұрын
@@Mazda626GF actually i don't have user manual with me. Japan didn't send this vehicle with it so I don't have any thing from user manual. Also it never happened before like the battery is replaced so it works good. But after installing the module, all four windows are rolling up nicely but when ignition on auto roll feature is not working. Ok i will do with your procedure. Pulling the button for 2 seconds till it reaches down and pushing the button for 2 seconds till it reaches up. Then open the windows and close the door and check. . Right ? I hope it works. Lets see in the evening. Then I'll let you know.
@tnamen13073 жыл бұрын
@@ZeeSuzukiEvery does the car originally has driver side auto up and auto down window feature??? First confirm this one.
@leonardoquerbi37322 жыл бұрын
Hola amigo compré esa misma interface .tengo una pregunta me sirve para un Renault Sandero stepway año 2015 .gracias !!!
@Mazda626GF2 жыл бұрын
Sorry, no idea.
@fgovene10632 жыл бұрын
obrigado pelo vidio! podes me ajudar? comprei um modolu identico a que estas a montar o teu mazda, mas nao consigo ligaar os fios que devem ser cortados e ligados ao modulo e onde deve ser ligado o positive trigger. tentei por varias vezes mas nao funciona
@Mazda626GF2 жыл бұрын
Do you have installation instructions with the module? If you so I really doubt I'll be able to explain them better :/ If you don't you'll need to figure out which wire is which, which requires a multimeter and module disassembly.
@TheDjorder8 ай бұрын
It´s Possible using this module only for 2 doors?
@Mazda626GF7 ай бұрын
Yes, it will just timeout for the other two channels.
@TheDjorder7 ай бұрын
Thank you, Happy New Year
@Mazda626GF7 ай бұрын
@@TheDjorder Thanks, you too ;)
@cristoferblindeling29754 жыл бұрын
with this 1 module , is possible to open when unlock+ close windows when locked the door ?or only close when you lock the door ?
@Mazda626GF4 жыл бұрын
Instructions say only close. I can tell you you can do auto open as well on the 626, if you connect it properly. Unfortunately, only one of the two - you cannot open and close with the same module. You can add two units - one for open, one for close, but then you'll also need to think how to make sure they are not working at the same time (happens if you quickly lock and then unlock you car) as that will short the circuit.
@cristoferblindeling29754 жыл бұрын
@@Mazda626GF Im done instaling but the driver window wont close why ??
@tnamen13073 жыл бұрын
@@Mazda626GF quickly open and close----indeed very very important point to remember!!! You are very intelligent Bro!!!
@plasmar14 жыл бұрын
I dunno about your specific rollup module, but been using mine about 2yrs~, it will close the windows and than try a second time in case of any errors; that's why the extra clicks...... watching this as my car didn't originally have power windows; I installed a conversion kit, so I was able to do all the wiring inside under the dash:P; and am now planning to do up my newer car that has factory power windows so I wasn't sure how it was normally done on oem power windows ** I too sometimes have issues with the rear passenger window not closing on the first attempt; as I installed a conversion kit I think it might be due to that is the window with the longest wire length, this might be the same issue but in oem setup:P
@Mazda626GF4 жыл бұрын
Adding electric windows is a cool modification, congratulations! I do not know if your are now trying to add automatic close to 626 or 6, but if it is 6 then check my update in the description! I'm currently thinking if how to solve the issue. For now the most logical and easy thing is to trigger IG-OFF timer before activating the module for roll-up. I hope I make any sense :D
@plasmar14 жыл бұрын
@@Mazda626GF neither, will be doing pontiac vibe 2009(toyota matrix); the trigger will be a 3rd party alarm system's arm lead..... especially since my experience was with non oem retrofits i get the concept it just a question of suggested methods people have tried before vs figuring things out from scratch; thanks for the reply and video:)
@tnamen13074 жыл бұрын
@@Mazda626GF is safe mode available???
@Mazda626GF4 жыл бұрын
Please define "safe mode".
@tnamen13074 жыл бұрын
@@Mazda626GF is one touch autoup or autodown window is available at the driver side??
@raquelmendes7879 Жыл бұрын
Hi friend liked your video but i have a question would it work on my 1992 honda accord it has power windows
@Mazda626GF Жыл бұрын
I do not have wiring diagrams for that car, but chances are it will work. I cannot guarantee, though.
@raquelmendes7879 Жыл бұрын
But it diesnt need to be obd2 compatible right
@Mazda626GF Жыл бұрын
Nope, diagnostics (OBD) has nothing to do with it. The way windows are wired has ;)
@PPPP-qi4kh3 жыл бұрын
Hi friend; thanks for your video. Could you help me? The module works apparently fine if I connect it as the diagram indicates, but after 3 or 4 times the fuse blows. I also tried installing the module with a relay but it never worked. Is it necessary or mandatory to connect the 4 windows or can I install only the driver and the passenger? ((I connect the passenger window to the cables on the rear of the driver to avoid delay) What could be the cause of the blown fuse? Thanks
@Mazda626GF3 жыл бұрын
What is the rating of the fuse? Usually it is way above what the motor should use, but in your case it may be change previously with smaller rating. About connecting less than 4 windows - it should work, you'll just have timeout between closing windows if not connected one after another. Order is driver window, rear window behind driver, passenger window and finally rear window behind passenger. If you connect only 2 windows in the place of the first 2 of the order you should be fine
@PPPP-qi4kh3 жыл бұрын
@@Mazda626GF Thanks for your reply, the fuses have been 5 and 10 amp. I have checked the installation several times and everything is according to the diagram. For now I think it is better to leave the module disconnected. Thanks
@Mazda626GF3 жыл бұрын
These fuses seem too small. 5 amps is nothing, one of the smallest fuses in car industry and it is placed on a big consumption like motor - not good. Increase it. On the Mazda 626 the fuse for driver window is 20A and the fuse for all other windows is 30A. These are more appropriate for motors.
@PPPP-qi4kh3 жыл бұрын
@@Mazda626GF You're right about the fuse. I just tried a 20A fuse and the module worked, but I think not correctly. The windows go up automatically when the doors are opened (without activating the door lock). I tried several times and only once did they close when I activated the door lock. I don't understand what is wrong. Thanks friend.
@Mazda626GF3 жыл бұрын
Check your trigger signal - it triggers the module at the wrong time. Use different trigger signal.
@user-rj1cj1gj2z3 жыл бұрын
Current Status module start > driver side front window not closer > driver rear window closer "ok" > passenger rear window closer "ok" > passenger front window closer "ok" green/black : Lock the door (-Signal) Connection green : Lock the door Actuator (+Signal) Connection purple : not Connection white : key on (+Signal) Connection black : GND Connection red (fuse) : BATEERY 12V+ Connection yellow : cut and swich side (stripe wire) , moter side (color wire) yellow/red : cut and swich side (stripe wire) , moter side (color wire) gray : cut and swich side (stripe wire) , moter side (color wire) gray/black : cut and swich side (stripe wire) , moter side (color wire) orange : cut and swich side (stripe wire) , moter side (color wire) orange/purple : cut and swich side (stripe wire) , moter side (color wire) blue : cut and swich side (stripe wire) , moter side (color wire) blue/brown : cut and swich side (stripe wire) , moter side (color wire) Only the window next to the drive - Open and close after receiving the signal. When the module is operating, the tester receives a + signal on the yellow/red/yellow wire. How do I connect it? I've also installed a relay to change the signal, but when I install it, the window closes when I manually operate it. Of course, only the window next to the driver doesn't work even if the module is running. help me plz~
@Mazda626GF3 жыл бұрын
Hello. Since passenger window is working, I would suggest to switch wiring between driver and passenger window. If problem moves to passenger window, then either you connected it the wrong way or module is defective. If problem stays on the same window, then problem is within the car, not the module.
@user-rj1cj1gj2z3 жыл бұрын
@@Mazda626GF The window next to my car is open and closed automatically. The window next to the driving is a safety moter module. Problem: If you connect the electric wire as in the manual, you can operate it manually. If you lock the door, only the window next to the driver does not work. Other methods: 1. Only the window next to the driving -If a signal is sent randomly, it works, and the wires to close the window are cut and converted into a signal using a relay. If you close it in manual mode, it will open. It is also not possible to close automatically when locked. 2. When I opened the window on the PCB with you, I soldered a yellow stripe line to the point where the + signal came in, and connected the yellow color to the side going to the motor. But the fuse is broken. Where the PCB + signal I found appeared was the PCB relay. 3. I tested it by replacing it with the window next to the passenger. There was nothing wrong with the product. ps. Why did you connect to the pcb? When the module is operating, the striped color is a -signal, and the general color is a +signal It is the same product as you. Let me know your email and I'll show you a video and schematic. Please let me know your problem. The seller is not giving an answer.
@Mazda626GF3 жыл бұрын
I'm sorry, but I really struggle to understand what you are saying :(
@ivailokrystev98993 жыл бұрын
За мазда 3 става ли модулът?
@Mazda626GF3 жыл бұрын
В най-добрият случай ще има същия проблем (описан в описанието на видеото, открит в последствие) като 6-цата, та не се препоръчва. Принципно имам идея как да накарам модула да работи на 6-ца, но не съм имал възможността (все пак нямам такава кола постоянно на разположение). Ако 3-ката е от тези дето имат 4 автоматични прозореца, не си прави експерименти. Ако е от тези дето само шофьорския е автоматичен, то тогава си в графата с 6-цата - трябват трикове за да се подкара правилно...
@rasiknaik54524 жыл бұрын
Hindi full diagram power wind
@romandirksen17002 жыл бұрын
По русски можно?
@Mazda626GF2 жыл бұрын
Sorry, I do not speak Russian :/
@romandirksen17002 жыл бұрын
@@Mazda626GF Und ich spreche kein Englisch. )))
@cesaraugustocastillogomera82864 жыл бұрын
?
@Mazda626GF4 жыл бұрын
Hello. I see only a question mark, but no question.
@cesaraugustocastillogomera82864 жыл бұрын
@@Mazda626GF i already installed it thanks it was complicated but its done thanks
@tnamen13074 жыл бұрын
@@Mazda626GF hello, what are you actually turning the knob to adjust?? Where is the knob? What it does by adjusting the knob? Please more information about them.
@Mazda626GF4 жыл бұрын
In plain language, the knob controls how high the window will go before the module decides it has reached the end. You can go all the way from window not going up at all to trying to go up more even after the window is completely closed. You need to adjust that so the module stops the motor at the appropriete point. Keep in mind that the way this is implemented is by current, so if something slows down your window (like debris or with time it degreases) it'll start stopping earlier and you'll need to fix your window (or re-adjust the knob, but better fix the window).
@tnamen13074 жыл бұрын
@@Mazda626GF I have exactly the same module as yours. I adjusted the potentiometer but still the driver side doesn't roll up automatically. It just roll up for about 3 seconds and stopped. The remaining 3 windows are working fine and perfect same as before and after adjusting petentiometer. Problem is with the driver side which has one touch auto up window. please help me solve this driver side.