AutoDesk Inventor 2021 Worm Gear Tutorial
Рет қаралды 8,965
Күн бұрынTutorial using Autodesk Inventor 2021 to create a Worm Gear with functionality using the Design Accelerator. An Assembly model will be created and we will use normal mating constraints to control the availably degrees of freedom in the part files. Finally we will use a drive constraint to make the gears function.
Please subscribe to the channel for more exciting CAD Tutorial videos like this. Videos will included tutorials using Inventor, Fusion, NX, and Solidworks.
If you have an idea for our next CAD tutorial please leave a comment below.
@elevation62 Ай бұрын
Can you do a tutorial on worm gear with dynamic simulation I am getting errors while trying to implement
@kaschberle6948 3 жыл бұрын
I followed your video step by step, but the teeth appear to be interfering with each other. is that normal or did i do something wrong?
@lachlantate2379 Жыл бұрын
hmm good tutorial, however the gear ratio seems to be incorrect. This isnt accurate for how it would function realistically
@olearyadam 3 жыл бұрын
Note that the worm screw should drive the worm gear, you have it the other way around. Worm drives are inherently not able to have the gear driving the worm screw.
@TheeGrandmaster 2 ай бұрын
"worm gear tutorial" press and use defaults - useless
Morrison Institute of Technology
Рет қаралды 41 М.
Kirill Multitool
Рет қаралды 72 МЛН
Francisco Donizety Lopes
Рет қаралды 3,4 М.
Undecided with Matt Ferrell
Рет қаралды 627 М.
3D Parametric Solid Model Drawing
Рет қаралды 7 М.