AutoDesk Inventor 2021 Bevel Gear Tutorial
Рет қаралды 14,759
3 жыл бұрынLearn how to create a Bevel Gear In AutoDesk Inventor 2021 using the Design Accelerator and how to properly constrain the assembly so that it has the proper degrees of freedom, and can function.
Please Subscribe to the channel for more exciting videos like this, in a variety of CAD software.
If you have an idea for our next video please leave a comment below.
@reza2060 3 жыл бұрын
Thanks for the instruction, but can you explain why driving the Angle in the Assembly made by Design accelerator stops every 90 degree but turning manually has no problem?
@alexanderpierzchala1615 2 жыл бұрын
to constrain the secondary gear axis from the one degree of rotation it still has, just use an angle constraint (either 0 or 180) or with the axis of the remaining gear and the desired axis. I used the X axis.
@faisalking1632 7 ай бұрын
Very helpful 🎉
@ukaszbuacinski6043 4 ай бұрын
How to add Design module ?
@williamcampbell9859 Жыл бұрын
lmao you didn't change the gear ratio 💀
@joe_3006 Жыл бұрын
thanks for nothing
Morrison Institute of Technology
Рет қаралды 41 М.
Morrison Institute of Technology
Рет қаралды 8 М.
超人夫妇
Рет қаралды 46 МЛН
Morrison Institute of Technology
Рет қаралды 20 М.
The Fusion Essentials
Рет қаралды 26 М.
3D Parametric Solid Model Drawing
Рет қаралды 16 М.
Man and Machine Ltd
Рет қаралды 124 М.
3D Parametric Solid Model Drawing
Рет қаралды 48 М.