How to change front wheel bearing on ALFA ROMEO 147 (937) [TUTORIAL AUTODOC]

Рет қаралды 7,797

autodoc.co.uk

Күн бұрын

How to change front wheel bearing / hub bearing / wheel bearing kit on ALFA ROMEO 147 1 (937) 1.6 Hatchback 2000-2010 [TUTORIAL AUTODOC]
Wheel bearing on ALFA ROMEO 156 Saloon (932) (09.1997-09.2005) / ALFA ROMEO 156 Sportwagon (932) (01.2000-05.2006) / ALFA ROMEO GT (937) (11.2003-09.2010) / ALFA ROMEO 166 (936) (09.1998-06.2007) / ALFA ROMEO GTV (916, 916C) (06.1995-10.2005) cars should be changed, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC - interstitials.onelink.me/1036...
⚡ All video and PDF tutorials on replacing ALFA ROMEO 147 parts: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/al...
❱❱ Install the AUTODOC CLUB - club.onelink.me/d2X8?pid=yout...
🛒 Visit our website: www.autodoc.co.uk/?...
Wheel bearing: www.autodoc.co.uk/car-parts/w...
Wheel bearing for ALFA ROMEO 147 (937) : www.autodoc.co.uk/car-parts/w...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
MOBIL Grease: www.autodoc.co.uk/mobil/90020...
🔔 Subscribe to the AUTODOC channel so that you don't miss the latest videos on car parts replacements ➜ kzfaq.info?s...
00:00 - ALFA ROMEO 147 (937) - wheel bearing / hub bearing / wheel bearing kit: step-by-step changement tutorial
00:33 - Unscrew the wheel bolts.
01:41 - Remove the brake caliper.
02:09 - Remove the brake disc.
02:23 - Disconnect the ABS sensor wiring.
03:26 - Disconnect the ball joint from the steering knuckle.
04:03 - Detach the control arm.
05:16 - Clean the hub bearing mounting seat.
06:50 - Press the new bearing in the steering knuckle.
07:30 - Install the wheel hub on the steering knuckle.
09:40 - Connect the ABS sensor wiring.
11:14 - Install the brake disc.
13:07 - Lower the car and working in a cross order, tighten the wheel bolts.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► ALFA ROMEO car repair tutorial - • ALFA ROMEO car repair ...
► ALFA ROMEO 147 car repair tutorial - • ALFA ROMEO 147 car rep...
► How to change oil filter and engine oil on ALFA ROMEO 147 (937) - • How to change oil filt...
► How to change front brake pads on ALFA ROMEO 147 (937) - • How to change front br...
Mobile shop: m.autodoc.co.uk/?Y...
📢 AUTODOC on social media:
Instagram: autodoc_auto...
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
KZfaq: / autodocuk
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips

Пікірлер: 7

@jonnyware9061 2 жыл бұрын

Excellent! Very clear. The graphics showing the Torque settings is a superb idea!

@christoskylar2601 Жыл бұрын

I suggest removing the Hall sensor at the bearing instead of dismantling panels to disconnect the lead from the wiring harness. It's just one small bolt to loosen with a 10mm spanner or socket and then carefully extract the fairly long sensor.

@autodocuk Жыл бұрын

When dismantling the sensor, it can be damaged.

@christoskylar2601 Жыл бұрын

@@autodocuk I tend to disagree. I've done it on both front wheels and didn't damage the sensors. The other popular Autodoc video shows to do it that way: kzfaq.info/get/bejne/n9xyZpV_2L7egas.html#t=4m58s I'd much rather remove one M10 bolt than dismantling panels and upsetting wiring that could be left alone. I just don't see the point of doing all that extra work.

@mattbettany1174 6 ай бұрын

@@christoskylar2601my sensor was completely stuck and I ended up breaking it

@christoskylar2601 Жыл бұрын

A 36mm socket is needed for the wheel nut, not 38mm.

@autodocuk Жыл бұрын

We are sure that your comment will be useful for many of our viewers.