How to change clutch kit on BMW E46 Convertible [TUTORIAL AUTODOC]

No video

How to change clutch kit on BMW E46 Convertible [TUTORIAL AUTODOC]

Рет қаралды 73,083

autodoc.co.uk

Күн бұрын

How to change clutch kit on BMW 3 4 (E46) 2.2 Convertible 2000-2007 [TUTORIAL AUTODOC]
Clutch kit on BMW 3 Compact (E46) (Baujahr 06.2001 - 02.2005) / BMW 3 Coupe (E46) (Baujahr 02.1999 - 07.2006) / BMW 3 Limousine (E46) (Baujahr 03.1998 - 02.2005) / BMW 3 Touring (E46) (Baujahr 10.1999 - 02.2005) cars should be changed, as a rule, according to one and the same procedure. However, there can be slight differences due to specific features of the vehicle design.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC app - interstitials.onelink.me/1036...
⚡ All video and PDF tutorials on replacing BMW 3 parts: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/bm...
❱❱ Install the AUTODOC CLUB app - club.onelink.me/d2X8?pid=yout...
🛒 Visit our website: www.autodoc.co.uk/?...
Clutch kit: www.autodoc.co.uk/car-parts/r...
Clutch kit for BMW 3 (E46): www.autodoc.co.uk/car-parts/r...
🔔 Subscribe to the AUTODOC channel so that you don't miss the latest videos on car parts replacements ➜ kzfaq.info?s...
00:00 - BMW E46 - clutch kit: step-by-step replacement tutorial
00:18 - Prop up the subframe reinforcement bracket
02:48 - Remove the clutch slave cylinder
04:45 - Clean the exhaust system fastener
05:39 - Remove the exhaust heat shield
06:52 - Unscrew the engine starter fasteners
08:15 - Disconnect the gearbox from the engine
09:19 - Remove the pressure plate together with the clutch disc
10:30 - Install the new pressure plate together with the clutch disc
12:07 - Treat the release bearing mounting seat
14:16 - Attach the shift lever support arm
16:56 - Install the engine splash guard
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► BMW car repair tutorial - • BMW car repair tutoria...
► BMW 3 (E46) car repair tutorial - • BMW 3 (E46) car repair...
► How to change window regulator BMW E46 Touring - • How to change window r...
► How to change engine thermostat on BMW E46 Touring - • How to change engine t...
Mobile shop: m.autodoc.co.uk/?Y...
📢 AUTODOC on social media:
Instagram: autodoc_auto...
Facebook: / autodoc.de
KZfaq: / autodocuk
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2022 AUTODOC AG All rights reserved

Пікірлер: 57

@e36fanatics 2 жыл бұрын

this man just changed clutch in 18 minutes

@autodocuk 2 жыл бұрын

Our videos are for informational purposes only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of the auto maintenance service. AUTODOC

@catvisimo 3 ай бұрын

life saver again, great help on changing the clutch on my e46 2005 318cabrio

@tamermohamed9804 2 жыл бұрын

Thanks for your efforts

@David-cd5zt Жыл бұрын

Outstanding video and camera work - keep up the great work!! I am about to do this on my Z3 and this was really helpful. Much less intimidating after watching your step by step tutorial on the E46 :)

@autodocuk Жыл бұрын

Thanks for your positive comment! Stay with us!

@mikivojinov6381 2 жыл бұрын

Great job as always!

@koki8208 2 жыл бұрын

Nice video !!!!

@jayaseelankuberan9276 4 ай бұрын

Great job. Love from India ❤

@trixtarick Жыл бұрын

Great work guys . i use your videos all the time . Many thanks

@autodocuk Жыл бұрын

Thank you for sharing your opinion with us.

@MyManTman 2 жыл бұрын

nice work

@paveljuchevic 2 жыл бұрын

Thanks, very good tutorial 👍

@autodocuk 2 жыл бұрын

Thanks for your positive comment! Stay with us!

@motopez9840 2 жыл бұрын

Is this clutch the same as a hard top e46 320d

@tribewu3223 Жыл бұрын

Is the hex bit No.H14 a 1/2 socket size or 3/8 ?

@alexey9900 2 жыл бұрын

Good 👍👍👍

@mmpower06eotuzalt21 2 жыл бұрын

👏🏻 bravo

@bigbill74scots 2 жыл бұрын

Great tutorial. Ignore the haters.

@autodocuk 2 жыл бұрын

Thanks for your positive comment! Stay with us!

@stannersstanners612 2 жыл бұрын

Hex 14 for align clutch up ( like it ) 👍

@georgevinten2698 3 ай бұрын

Did he use an alignment tool for the clutch aside from the bolt on bit to hold the flywheel?

@autodocuk 2 ай бұрын

In the video, a special centering tool was used, as well as a flywheel clamp.

@user-xw1mx1xm9o 2 жыл бұрын

👍❤️

@davidsolera5883 2 жыл бұрын

👌👍

@jocalibusohump 2 жыл бұрын

Wow

@dan8789 2 жыл бұрын

So you don’t have to support engine when removing gearbox? Will that not strain the engine mounts? Thanks

@maltepettersson3083 2 жыл бұрын

no the engine mounts are designed to hold the engine hence.. engine mounts. when gearbox is removed the engine can rest on the engine mounts without problem.

@autodocuk 2 жыл бұрын

Our videos are for informational purposes only. All routine replacements and values \u200b\u200bcan be found directly in the technical documentation for your car or use the help of a car maintenance service. AUTODOC

@mohdsukizambinsuhaimi6332 2 жыл бұрын

Tutorial E36 328i please

@balazskovacs8447 2 жыл бұрын

It's almost the same

@user-xw1mx1xm9o 2 жыл бұрын

👍👍👍❤️

@adi404 2 жыл бұрын

@Gesicaengineer 4 ай бұрын

🎉

@tolgaun 2 жыл бұрын

Is that a Manual transmission car ?

@autodocuk 2 жыл бұрын

Yes, with manual transmission

@williewalker5051 3 ай бұрын

Why didn't he change the flywheel?

@CONNORJohn-i1s 2 жыл бұрын

On ne doit jamais graisser le guide de butée lorsque celui-ci est en plastique (ce qui est le cas) car il y a risque dans le temps d'accumulation de saletés et risque de grippage de la butée sur son guide ce qu'il faut surtout éviter et puis surtout remplacer l'articulation plastique de fourchette (surtout lorsqu'elle ne tient plus en force dans le carter ce qui est ici le cas)...............Les mécanos du dimanche.....

@autodocuk 2 жыл бұрын

Merci pour ta remarque ! Elle sera utile pour nous et pour nos abonnés. Nous allons travailler à améliorer la qualité de nos vidéos.

@Brucewaynecustoms 11 ай бұрын

So the flywheel wasn’t changed?

@autodocuk 11 ай бұрын

In this case, the flywheel was not changed.

@mstv8849 11 ай бұрын

Is it nessesary to change also flywheel ? I have 320 cd cabrio 2006 and what happens that auto is shaking when releasing pedal in first gear and only first 4-5 starts, later nothing. I guess plate is bended so when geting warm it is more flexible and no shaking. My question do i have to change alao flywheel ?

@mollester5186 4 ай бұрын

@@mstv8849if its dual mass flywheel then you should because their job is to preserve transmission from engine vibrations and turbo diesels vibrate much more than atmospheric petrol engines. so every time you change clutch you should change dual mass flywheel. if you drive petrol then just get the surface cleaned or machined if its badly burned, but that only applies to solid disc flywheel.

@davyboy888 2 жыл бұрын

To be fair, few of us have 4 poster lifts... wouldn't mind seeing how you'd do it with the car on axle stands on the ground.

@maltepettersson3083 2 жыл бұрын

the same way? its not like the engine moves to another place when on jackstands. tho filming a how to, on jackstands is not good, because you cant get the same camera angles.

@davyboy888 2 жыл бұрын

@@maltepettersson3083 Sounds like you've not done one of these on the floor ;)

@DonBMW Жыл бұрын

I've done this on the floor on an E36. Tough tough job and not for the faint of heart. Must raise the car at least 22cm off the ground. Used an engine support bar to tilt and support the engine. Also used a wide range of extensions, rust penetrator fluid, impact gun, and a small scissor jack to lower and raise the transmission. If working uninterrupted this job could be completed in a weekend.