No video
Shelby GT350 Rust Prevention For Your Chassis | Works on All Vehicles
Рет қаралды 11,554
Күн бұрынECS Rust Prevention Magic is what I do for extra winter protection. Watch how easy it is to apply as i demonstrate on my Shelby GT350 and you can apply on any of your vehicles. Pick up a can and the few supplies and get it done. 5+ months of salt and no rust so far!
ECS Rust Prevention Magic amzn.to/2G1Gn5t
Acid Brushes amzn.to/2tjxnG7
Ultra Heat Gun amzn.to/2Fj2Zgl
Glass Mason Jar with lid amzn.to/2Hc1rW8
Do not be afraid of the elements if you understand and properly maintain your car it will remain corrosion free. This product works on any vehicle such as all S550 Mustangs, BMW, Mercedes or whatever your prized possession is in your garage.
Please Follow, Like, Subscribe and Support
autofanatic@yahoo.com
PATREON www.patreon.co...
INSTAGRAM / autofanatic_cars
@joeg9810 2 жыл бұрын
From many years of doing repair work on Navy ships anytime you use stainless fasteners use some lubricant with graphite in it. The Navy has basically outlawed black oxide fasteners as people were using them in the wrong areas/conditions (heavy heat and pressures) and they were breaking. CAD bolts on ships are used in areas of high heat and lower pressures. They are good for that but over time do corrode. Good video!
@bobbymorgret 4 жыл бұрын
Loctite makes it too, it's called "extend". We actually bought it and thinned it down and sprayed the entire tube chassis on a late model dirt track car and it worked great.
@i4nic256 6 жыл бұрын
Looking forward to the chassis detailing video, the North East winters and road salt are murder on the undercarriage. I've tried Fluid Film and other stuff but none of it really worked well so far. I wish they made this RPM in a spray so the whole undercarriage could be protected without grueling labor.
@sydrider6023 2 ай бұрын
I need this product!
@SnakeDoctor5104 3 жыл бұрын
Use CRC Heavy Duty Corrosion Inhibitor or Cosmoline Military RP-342 and call it a day. Simple spray and done.
@MazdaMike194 6 жыл бұрын
The coating is zinc flake we have adopted these at John Deere with 120-144 HR SS (salt spray)
@akafish7135 6 жыл бұрын
Great to know! I need to pick up some of this for my Mustang GT
@moneyparhar 6 жыл бұрын
On that spindle hole I use anti seize on that coat it very well and plus u can spray undercoating from rustolium that this is very well and bolt for exhaust take off them and use lot of antisieze to them and put back toghter
@autofanaticcars 6 жыл бұрын
I am going to remove the rust on the hub and front toe links once it warms up, il show a video when i do the chassis detailing. I will also coat the hub and toe link with POR15 so it will never look bad again, these parts are rusty off the assembly line unfortunately this is just how new cars are pumped out.
@gtvic2010 6 жыл бұрын
Love it keep up the good work!
@Twobarpsi 2 жыл бұрын
How would you protect rear axle tubes on a S197 Mustang?
@scottbarker9058 6 жыл бұрын
THATS WHY MINE ...16 GT350 HAS BEEN GARAGED SINCE OCT. TILL THE SNOW MELTS MAYBE NEXT MO. THE CITY + COUNTY SORAYS SALT-ICE MELTING CHEMICALS ON ALLLLL THE MAIN ROADS UP HERE IN CENTRAL OR. THEY DO IT ALL OVER THE COUNTRY.
@laszlodesimon4768 6 жыл бұрын
Thanks again for sharing a great car care tip. Good video and your car is as nice below the surface as it is above. Is there no limit to your amazing knowledge? Thanks, so much.
@autofanaticcars 6 жыл бұрын
Thanks Lazlo, i can pretty much do everything except hang wall paper or tint windows go figure right ha ha ha
@KennyHann Жыл бұрын
can you add this to alloy wheels?
@autofanaticcars Жыл бұрын
No
@carrated 2 жыл бұрын
are all the pieces you outlined all treated with ECS?
@autofanaticcars 2 жыл бұрын
yes the stuff works well but you gotta purge the moisture out first and apply it right
@dragonling748 5 жыл бұрын
would you ever consider doing this to the undercarriage of your car?
@nimster64 Жыл бұрын
Can you paint over it?
@autofanaticcars Жыл бұрын
No it won’t allow adhesion
@milkmanfitness 6 жыл бұрын
What happened to the red calipers that you did?
@autofanaticcars 6 жыл бұрын
Demarco Quant springtime il put them on, getting another blizzard today this winter just sucks
@bobbyhoude5974 6 жыл бұрын
Will this product clog up threads, making it hard to remove nuts?
@autofanaticcars 6 жыл бұрын
no it will not, you can even do hardware that is not mounted prior and then assemble this is what we do on classic cars during restoration assembly
@irvinvance1977 6 жыл бұрын
Did you use this on your rotor hats?
@autofanaticcars 6 жыл бұрын
V G I i did not, ECS does make another product for aluminum il be testing soon
@slapjack4304 6 жыл бұрын
Does this stuff have to be reapplied after a certain amount of time? Want to do the caliper pins and other hardware like you did. I’m guessing it isn’t permanent. Also Looking for something to do a 409 stainless exhaust. May not work though cause the exhaust gets hot and would probably liquify the product? Any suggestions for an exhaust that wouldn’t have to be reapplied every year. Going to do it before it’s even installed so it doesn’t get the chance to rust at all.
@autofanaticcars 6 жыл бұрын
yeah if you apply this twice a year and suffer from bad winter it will work amazing, for an exhaust you can remove it and polish it up, 409 does not polish so great, if you get an aftermarket system from 304 it will never need to be treated.
@slapjack4304 6 жыл бұрын
I haven’t installed the 409 system yet so I wouldn’t have to remove it, But I was hoping to find something that I could treat it with before installing it and not have to worry about it rusting. Maybe just some high temp black paint would be my best option. I have a midnight edition Silverado so black exhaust would go with the scheme I guess. Thanks
@autofanaticcars 6 жыл бұрын
Erik St George get it ceramic high temp coated some good powder coat shops offer this we get it done all the time for matte black tips and full systems on exotics.
@genysmenrunner1677 5 жыл бұрын
Do you use this in the rotors?
@autofanaticcars 5 жыл бұрын
no just for stuff i show in the video, it really works
@genysmenrunner1677 5 жыл бұрын
Auto Fanatic all right and what do you recommend for around the rotors, sanding and what product to prevent? Also in the front, mine are like painted in cast aluminium from factory but they are starting to rust
@duwonrhee3589 5 жыл бұрын
what? pre-heat every single bolt and nut?? can't do that even though I love my GT I was expecting more practical method.... a little dissapointed. nice job though
@autofanaticcars 5 жыл бұрын
you can use a can of cosmoline but that makes such a mess to use and you spray everything
@scottbarker9058 6 жыл бұрын
FORGOT TO SAY IT CANT BE THAT GOOD ON THE FRAME ;ETC. ALL OF THE SNOW MELTING CHEM.
Auto Fanatic
Рет қаралды 16 М.
Garage 54
Рет қаралды 4,4 МЛН
LegitStreetCars
Рет қаралды 1,2 МЛН