Autoglym Polar Blaster NILFISK, KEW ALTO Adaptor

Рет қаралды 25,605

4 жыл бұрын

It took me a while to work out how to put this together. I couldn't find a video on it, so thought id have a crack at this one.
I purchased mine direct and i'm hoping the snow foam lance will last more than the cheap Amazon item I bought that failed and the official Nilfisk bottle which fell apart after a year.
weblink to the adaptor: www.autoglym.com/products/acc...
My channel is usually just about family films to share with our family and friends round the world.

Пікірлер: 51

@idarlison Ай бұрын

Very useful, just followed the instructions and it worked like a charm….thanks!

@AutoglymUK 4 жыл бұрын

Good video. We use those black gloves too. Hope you enjoy the Polar Blaster.

@michaelmorris9895 Жыл бұрын

I had no idea how to work out how to change to the Nilfisk adpter until i saw your video so your video helped greatly THANKS

@johngrabowski5259 3 жыл бұрын

You’ve just saved me an hour of trying to work it out. Many thanks.

@missemmablau 4 жыл бұрын

Thank you so much! It was driving me mad trying to work out how to fit the adapter. So simple when you know how!

@dan8031 Жыл бұрын

Cheers for the heads up! Glad to have seen this prior to starting to try and put it together

@he15rgp81 3 жыл бұрын

Great Vlog Sir, Image was super clear, Sound Was Perfect

@mattavalon 2 жыл бұрын

Brilliant! It took me ages to get my head around it! Cheers mate

@lenniecar1966 3 жыл бұрын

Just the video i was looking for ... Many Thanks

@MatB2010 4 ай бұрын

Thanks this video was so useful, had been starting at the same brass coupling trying to figure out both were is was supposed to fit on the Autoglym and washers ends!🙂

@beaniebrotha 4 жыл бұрын

Thanks for the video, I had no idea how to install the adaptor and I couldn't work out how to install it - the instructions on autoglym wasn't too clear

@balindseybl 4 жыл бұрын

You're a total lifesaver

@stefipower 3 жыл бұрын

Thanks man I need to see that video to make my decision

@LeedsHypnotherapist 2 жыл бұрын

That's way better than on the Autoglym website

@stevenhumphries110 Жыл бұрын

Great vid. !..I will now go out and one...as for getting it in and out...I push the gun to the floor to get the said pressure and twist..

@jokerfleckcast3196 Жыл бұрын

great video. very helpful

@steveperkins3215 3 жыл бұрын

Very good useful thanks

@avinashbhogun 2 жыл бұрын

Useful.

@mikehodgkinson4875 2 жыл бұрын

Hi. What if u have a Lance with threaded end how do u put polar blaster on

@TeamRobertson 2 жыл бұрын

Sorry, no idea. Maybe autoglym can offer you a different adapter?

@spookyyy1139 4 жыл бұрын

Your everyone’s hero now lol

@Lovablehounds 4 жыл бұрын

Thank you!! Just spent half hour scratching my head

@andyconnell2589 Жыл бұрын

What about showing how the foam gun performs buddy

@toffee5515 2 жыл бұрын

Good effort,where did you get the 20mm adapter from ,that fits to the gun?

@TeamRobertson 2 жыл бұрын

Amazon. Loads to choose from.

@TeamRobertson 2 жыл бұрын

www.amazon.co.uk/dp/B08VWTSS91?ref=ppx_pop_mob_ap_share

@aaronburke593 2 жыл бұрын

Hey does it matter what Nilfisk power washer you have?

@TeamRobertson 2 жыл бұрын

I think all the nilfisk sprayers have the same male / female connectors, but the Autoglym site is specific which fit.

@AI-iy8vo 2 жыл бұрын

Which nilfisk pressure washer do you have?

@TeamRobertson 2 жыл бұрын

C115 (10 years old I guess )

@ptheledge5390 4 жыл бұрын

How good is the blaster? Thinking about buying one

@TeamRobertson 4 жыл бұрын

I'm pleased with it. Much easier to load than the standard Nilfisk item, and produces a much thicker foam which clings longer. I had bought an amazon special, but that fell over a lot, and eventually stopped working for some unknown reason.

@LeedsHypnotherapist 2 жыл бұрын

I think mine is defective. It just won't budge. I've even tried using a clamp and penetrating oil to open it up but it's locked solid

@TeamRobertson 2 жыл бұрын

As its brass, I'd try gently heating it in a vice. That may help it budge.

@LeedsHypnotherapist 2 жыл бұрын

@@TeamRobertson won't it melt the plastic?

@TeamRobertson 2 жыл бұрын

Heat the brass section at the bottom, not thr plastic, or put it in the freezer overnight just to play with the difference in materials.

@LeedsHypnotherapist 2 жыл бұрын

@@TeamRobertson heated the brass section up and the whole of the brass length is just spinning round inside the plastic. I'll try freezing next once it's cooled down. One of the worst things I've bought

@mohammedlateef8841 2 жыл бұрын

@@LeedsHypnotherapist any luck pal? Mine isn't shifting at all either. So frustrating

@darronelstob2607 2 жыл бұрын

Where did you get that adapter please , just what I'm after

@TeamRobertson 2 жыл бұрын

From autoglym website

@darronelstob2607 2 жыл бұрын

@@TeamRobertson thank you

@RutgerMulder 4 жыл бұрын

Looks like the wrong adapter you got there. Look for the Nilfisk Gerni adapter. They have the rounded tabs on the sides for the newer generation. That would explain you having trouble putting it in.

@toxotis70 3 жыл бұрын

do you have any link for this? I have the same problem.

@RutgerMulder 3 жыл бұрын

@@toxotis70 Here, type 3 (4th option) www.aliexpress.com/item/4000534007625.html?spm=a2g0s.9042311.0.0.27424c4dOXClqV but i'd suggest buying a gun with Nilfisk adapter instead www.aliexpress.com/item/1005002345865167.html?spm=a2g0s.9042311.0.0.27424c4d5EdtbB

@staytrue5307 3 жыл бұрын

@@RutgerMulder would this gun work with this autoglym foamer? Link keeps getting deleted, snubby trigger gun with nozzle kit from slims detailing is the item I'm asking about.