FOAM CANNON HACK! SIMPLE $5 MOD MAKES ALL THE DIFFERENCE

Рет қаралды 721,690

5 жыл бұрын

This part will make your Foam Cannon 10X better-
Orifice Universal 1.1 mm Thread Nozzle- geni.us/ALLTHEFOAM
Adjustable Snow Foam Lance Foam Cannon Foam Blaster- geni.us/FoamCannon
Sun Joe SPX-FC34 34-Ounce Snow Foam Cannon- geni.us/SunjoeFoam
In this video I show a simple and cheap hack to make thicker foam from a cheap amazon foam cannon. This is the best foam canon I've had and this quick mod is amazing.
➥ Snow Joe Sun Joe SPX3001- geni.us/FIlBDc
➥ Sun Joe Snow Foam Cannon- geni.us/SunjoeFoam
➥ 25’ Pressure Washer Extension Hose- geni.us/4PzbGnn
➥ Chemical Guys Honeydew Snow Foam- geni.us/re0rf
➥ Chemical Guys Scratch-Free Wash Mitt- geni.us/BWPcUX
➥ Chemical Guys Best Car Wash Bucket Kit - geni.us/1rDOa
➥ Chemical Guys Cyclone Dirt Trap- geni.us/CarM
➥ Chemical Guys Heavy Duty Bucket- geni.us/p98Xy
➥ Blake's Garage T-Shirts: www.wrenchon.com
Car Detailing Products I use:
➥Chemical Guys EcoSmart-RU geni.us/RBKnKM
➥Chemical Guy Hybrid V7 Optical High Gloss Spray geni.us/xKzh3o
➥Chemical Guys Diablo Gel Wheel and Rim Cleaner geni.us/Urx1yd
➥CarPro Reload Sealant Spray geni.us/buqnk
➥CarPro PERL Coat Plastic & Rubber geni.us/BjCTE
➥Durafoam Contoured Large Tire Dressing Applicator geni.us/AIcHNc
➥Chemical Guys Lava Luminous Glow Infusion WAX geni.us/czqtfl
➥Chemical Guys Light Duty Clay Bar and Luber Synthetic Lubricant Kit
geni.us/NxJc
Camera Gear I use:
➥ PANASONIC LUMIX GH5 Body 4K Mirrorless Camera, geni.us/wRvVAjq [Amazon]
➥ PANASONIC LUMIX G LEICA LENS, 8-18mm, F2.8-4.0 geni.us/UBO0 [Amazon]
➥ Rode Video Mic Go geni.us/PzaQOv [Amazon]
➥ Rode VideoMic Pro Plus geni.us/Nd573D [Amazon]
➥ JOBY GorillaPod 5K Kit geni.us/Bijy [Amazon]
➥ GoPro Hero 9 Black geni.us/HXLOWA
➥ Manfrotto 502 video head here geni.us/Be7l [Amazon]
➥ Zoom H1 Handy Portable Digital Recorder geni.us/bISj [Amazon]
➥ Lapel Mic HUACAM YYPJ-01-1 geni.us/hJHwM [Amazon]
➥ ProMaster XC525 Red Tripod With Head geni.us/BGBEpp [Amazon]

Пікірлер: 540

@ehpracing518 5 жыл бұрын

I bought a cheap foam cannon from amazon as well. I've used it over 100 times already and it still works perfectly fine. In reality you only need 1-2 oz of soap and about a quarter of the bottle filled with water and I got some crazy foam. Have used this technique in all of the cars I've detailed and even when doing larger vehicles

@djeremie2153 5 жыл бұрын

Like mentioned above. You only need about 1/2 the bottle with water. I use CG mr pink and get great results with similar setup

@johnnydavies927 5 жыл бұрын

Dose it fit any jet washer

@matthewjackson9615 4 жыл бұрын

And the foam does what ? Looks cool , so what the hey.

@brandonalan1513 4 жыл бұрын

Matthew Jackson loosens stuck on debris so when you rinse it, it washes away and leaves your car squeaky clean

@SOKPUPPY 4 жыл бұрын

Does that mean you don't have to scrub your car? For light dirt obviously, not caked or baked on stuff. Or does it break that down too?😁

@rfo23 5 жыл бұрын

Used the same 1.1mm orifice mod on my amazon foam cannon. And CG Honeydew Snowfoam, awesome results.

@Two_Buck 5 жыл бұрын

Thanks for showing the mod. I kept hearing people talk about this mod but I had no idea what they were talking about. Now I do.

@georgiatrudell7787 11 ай бұрын

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzfaq.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

@NStrong28 4 жыл бұрын

Ordered this setup thanks to you. Works great 🤟🏻

@ritoluis4903 5 жыл бұрын

Good video. I have same foam cannon and was considering buying a more expensive one. But I'll try this mod first.

@roninsamurai5614 5 жыл бұрын

Loving the intro! 🙌🙌🥰🥰

@SnailTrail4x4 5 жыл бұрын

Dude! YES, thats a super cheap fix that makes it so much better. Also I really like the two B-Roll shots you 3:02 Keep up the great work!

@claudeloi 3 жыл бұрын

Still too expensive for me. Read my comment. Got my done for zero dollar.

@titone14 5 жыл бұрын

Bro I just got this foam cannon but at the time you connected to the pressure washer it doesnt attach kinda well, it leaks water from the quick connector. Did you use some white tape to seal it?

@okbrandon 4 жыл бұрын

Can you provide a link to an adaptor to make the lance wand quick connect fit the soap cannons? The sun joe spx3000 doesn’t fit standard foam cannon connections.

@angelodepaolo 3 жыл бұрын

Thanks for also showing the orifice swap install itself. Plus citing 16 for wrench size.

@TENNESSEETRACKHAWK Жыл бұрын

Awesome thanx just ordered

@hawkeyestiguy 5 жыл бұрын

Great video man! I just ordered this!

@simcptmike 3 жыл бұрын

Perfect solution to my issue. Thx for the video. 💯👊

@BlakesGarage 3 жыл бұрын

No problem 👍🏼👍🏼

@robind.5542 2 жыл бұрын

Excellent Mod. Thanks.

@RaldasDetails 5 жыл бұрын

Nice video 👍🏼

@davidpatterson6589 5 жыл бұрын

If you swapped in a 1.1 then you most likely had a 1.25 installed on the first test. The 1.1 orifice is made for lower psi washers so it doesn’t get quite as much water

@92greensho 4 жыл бұрын

YEP ^

@nahuel2222 4 жыл бұрын

My washer is 70PSI with a max of 105PSI, should i use 1.25 or 1.1 ?

@Audiophilifix 4 жыл бұрын

@@nahuel2222 1.1

@Taylexwow 2 жыл бұрын

@@nahuel2222 You don't have a pressure washer......you have a garden hose.....the water system from my city is higher pressure than that unless you are using some different system of pressure measurement.

@tebz2145 2 жыл бұрын

@@Taylexwow he prob ment bar not psi

@aaronguerra7179 2 жыл бұрын

I noticed adding water first is better then your soap but any recommendations on when i use my foam cannon it comes out to strong like my pressure washer is on full blast

@rodneyboswell536 4 жыл бұрын

hi does this work for MATCC Foam Cannon Adjustable Snow Foam Lance for SPX Series Pressure Washer?

@kinksbikes 2 жыл бұрын

i just ordered the 1.1 orfice for mine Thank you

@jmart0820 3 жыл бұрын

do you know the thread size of the quick fitting? is it 14mm??

@bullitgr 2 жыл бұрын

I am waiting for the bosch easy aquatak 120bar to be delivered....and i have the meguiar's snow foam cannon .... !!! Will i have a good result for car wash??

@fiouable 3 жыл бұрын

I’m no chemist, but the foam thickness doesn’t mean better cleaning power. The soap also has something to do. I did that mod. Yes the foam is thicker, but it doesn’t remove more dirt than before. Thanks for the video. Wash your hat or better yet, throw it out.

@tuninggamer 2 ай бұрын

I think the idea is that thicker foam is less runny and liquid and thus stays longer in place to work its magic on the dirt. But I think you’re right in saying that the type of soap used is important too

@tyrone454545 5 жыл бұрын

Where can I find the stainless steel piece?

@raven98031 2 жыл бұрын

When I use my phone Cannon the pressure washer stop and go stop and go and it's not coming out at an angle and I did the modification I'm new to this if someone help me?

@torymblue2000 3 жыл бұрын

Hey anyone know a cost effective source for the replacement bottles? snapped mine, company cites their $20 plastic bottle is back ordered. Has to be a standard size available?

@matthewbarajas1593 3 жыл бұрын

Badass video bro

@1estorge 4 жыл бұрын

after you foam it what do you do next

@TheSoulMan11 5 жыл бұрын

I typically use 3 oz of soap and fill up half the bottle. No real need to fill whole bottle up and I get really good results. I also have same pressure washer but bought a chemical guys foam cannon and then upgraded to that smaller piece.

@reenigneesrevereht 5 жыл бұрын

Thanks to this video, just pulled the trigger on this orifice, the Amazon cannon, and a SunJoe SPX4000. Thank you for the top quality intro to a killer budget car wash setup, Blake! Looking forward to using it on my '90 325i sedan and '07 E92.

@BlakesGarage 5 жыл бұрын

Sweet!!! It will make your life so easy

@BigLou19 Жыл бұрын

Will that set up work on a electric Green works 2000psi?

@vinsonwalton28 3 жыл бұрын

Where did you get that new fitting?

@mylesm7947 5 жыл бұрын

Just started checkin out these foam cannons after 5 vids ,read the directions pressure and gpm determine orifice size

@AB-80X Жыл бұрын

Yup. The manufactures of pressure washers must really love these "experts" giving advice. Why mess with a good thing when people are shortening the life of their pressure washers lol. That said, many of these small garbage pressure washers do work and need a 1.1mm orifice. But still, people should really look in a table to find what they actually need.

@alexnasiadka5140 5 жыл бұрын

2:56 when you start dating a Latina

@user-fb5zk3bd7i 5 жыл бұрын

alex nasiadka 😂😂

@brad_neal 5 жыл бұрын

Pasty white here... I married one. I call her my lovely Latina! Damn!!

@alexnasiadka5140 5 жыл бұрын

Brad Neal lucky man!! Lol

@mrsmith7493 4 жыл бұрын

Funny but true

@Skyoneder 4 жыл бұрын

😂 nice

@snapsinvestments4712 8 ай бұрын

With what towek do you dry the car?

@gustavoescobedo8287 2 жыл бұрын

New subscriber broh thanks for Sharing!

@Supercharged_GS 5 жыл бұрын

Cleanest passenger fender after that video was done lol

@Audiophilifix 4 жыл бұрын

Did the one you removed have an o ring on it?

@SGMoto 5 жыл бұрын

Not even through the video yet, just needed to stop and thumb up the use of ‘No Quarter’ - dope!

@BlakesGarage 5 жыл бұрын

Thanks buddy

@f14tomcataocretired95 3 жыл бұрын

I realize I'm a bit late here. Been out sailing the seas on Navy Aircraft Carriers. Retired now and got more ME-Time. You sold me on the Orifice replacement. Great Video!

@Aswaguespack 3 жыл бұрын

Thank you for your Service to our Country in defense of our Freedoms.

@bradevans8714 4 жыл бұрын

Have the same pressure washer. Got pretty good results in foam with meguires gold class. Switched to chemical guys stuff. Not as much foam so I'm eager to try this

@IMHAMAD 4 жыл бұрын

Now this is a strong beard 💪

@CTRadventures 4 жыл бұрын

Thank you! I was about to get the exact same washer only the model w out the hose reel. Have you tried the other soaps? Great video

@BlakesGarage 4 жыл бұрын

I haven’t. Mostly because I’ve yet to run out of the gallon I purchased about two years ago.

@CTRadventures 4 жыл бұрын

@@BlakesGarage thanks for the update ! I put in my order, I'll let you know!!

@zaidchalabi1599 3 жыл бұрын

whats a good electrical pressure washer to do semi truck ? something not super expensive but effecient and can connect that foam cannon too and water to wash it off later

@BlakesGarage 3 жыл бұрын

It would definitely do the job you can also buy a wand extension to get higher easier also.

@AnthonyWilliams-vo1yc 3 жыл бұрын

OK I got a bear force Lance cannon 😳 how can I hook it up to my garden hose??

@dhansel4835 Жыл бұрын

Thanks for this info. I'm going out tomorrow and get the Ryobi 1,900 PSI electric sprayer.

@mrgregw 2 жыл бұрын

Problems with all the links in the description that I tried. I didn't try them all. Any tips?

@maddog9793 Жыл бұрын

I have the same Foam Cannon but I feel that it uses a lot of shampoo, I have to fill the bottle two and three times to be able to foam the entire car...... Any suggestions???

@14truelies 3 жыл бұрын

Hey are any of the sun Joe pressure washers good? I am looking at the smaller one right now and the one from harbor freight. Or is it better to just get the newer version of this sun joe in your opinion? Don't want anything too big since I'm military and I'm moving around a lot.

@AB-80X Жыл бұрын

No they are not.

@claudeloi 3 жыл бұрын

Blake recommend to exchange the orifice universal 1.1m screw costing about over 7.00 + shipping on Amazon. I am frugal so I went get me a short piece of Nichrome wire, cut a short lenght then insert into the orifice bent the wire to a 90 so it mate flat into the grove slot of the screw and that is it. The new reduce hole diameter will do the job. My way to save money and get result.

@Jakestarr1723 5 жыл бұрын

Do you need to put a new O-ring on the new orifice?

@ericjones3920 5 жыл бұрын

oh hell yeah!!!! awesome. Positive Flow.

@Coelacanth97 4 жыл бұрын

Blake, what was the size of the orifice you removed from the cannon to replace with the 1.1 mm oriface? There are a few cheap knockoffs of this same cannon and maybe they're not all built equal. Mine is an MATCC and the orifice I removed, after buying the one recommended here, looks like it has an identical hole size. I guess it doesn't make sense to remove one part if the "upgrade" part is the same.

@BlakesGarage 4 жыл бұрын

1.3mm was the stock size most foam cannons come with this size. It’s very hard to tell the difference as it’s not much smaller but it makes a huge difference.

@danno4800 5 жыл бұрын

Do I need an adapter if I use that spray cannon and that pressure washer to allow it to fit together? Or is this all I need? Thanks

@BlakesGarage 5 жыл бұрын

That’s all you need it all connects together 👍🏼

@karimspruill8847 Жыл бұрын

We're do you get that at

@estebandelatrinidad1846 4 жыл бұрын

I have the same foam cannon, don’t have a wand but it connects right to the gun of my pressure washer, tried spraying it and water shot out, tried twisting the nozzle as well as the twisting thing on top and pure water, any recommendations ?

@BlakesGarage 4 жыл бұрын

Take it apart something maybe clogged or linked in the soap feed area. I've never had an issue with mine.

@falcon759 3 жыл бұрын

The 1.1mm orifice clogged within 30 seconds for me (using Stanley 2150psi 1.4gpm electric pressure washer). The stock orifice works flawlessly.

@ginonet 5 жыл бұрын

I notice when you first start foaming with either orafice, the spray pattern is crazy wide, then you cut the video and then the spray is much narrower. What did you do?

@BlakesGarage 5 жыл бұрын

Just spun the tip to dial in the spray pattern to what makes the best foam.

@mikec4409 2 жыл бұрын

Just wondering about one thing. I have 2 foam cannons (one is for just in case). With both on them, I've had the cannon on a vice with a long wrench on the quick connect. These things are so torqued on, they absolutely refuse to budge. How did you get yours loos the first time you did this?

@AB-80X Жыл бұрын

They are more than likely fitted with loctite. Stick the quick release fitting in boiling water for two minutes, then it should be easier to loosen while hot. No need to dunk the whole thing in the water, just hold it in vertically so that the water submerges the connector fully.

@idetail4u Жыл бұрын

What is your psi, or litres per minute

@TommyLGarage 5 жыл бұрын

What a cool video! Did not even think you could hack it haha I will copy your idea! Thanks for the tip.

@WoodbridgeGuy06 5 жыл бұрын

Intro was Sick👍🏾

@BlakesGarage 5 жыл бұрын

Thanks man!!

@richardskaggs9931 4 жыл бұрын

whats your ride ? make and model ?? Nice

@scrumthebum2451 4 жыл бұрын

That’s a mikuni jet I have quite a few. Did you bigger on the jet or smaller ?

@Jonathan-L 3 жыл бұрын

I really hate it when good questions like yours don't get answered :(

@givigogaberishvili458 3 жыл бұрын

Could you tell me please, will the foam canon be still affective if the plastic pipe, that is in the bottle, will be much more longer?

@jeffk3192 2 жыл бұрын

the tube in the bottle should likely be slightly longer than the bottle itself so that full screwed in it bends to the side. That lets u get the last bit out easier. If your talking about hooking up plastic aquarium tubing to move the heavy bottle off your wand it would prolly work but the soap solution would take a while to siphon up the tube before it reaches your tube which is a bit of a hassle imo

@josegabriel9191 4 жыл бұрын

Thanks

@sto2779 3 жыл бұрын

I'm trying to focus my eyes on the foam cannon but it keeps on focused with the beammer lol

@wildpony1957 4 жыл бұрын

Thanks! Hope it works.

@jonah12705 5 жыл бұрын

I like this soap and have the same foam cannon. You may need to adjust the + and - on the top...I get thicker foam than this with mine consistently. I have a ryobi pressure washer so nothing much different in that realm.

@every_thing_wood1251 Жыл бұрын

I have the ryobi 1800psi and i cant get good foam for the life of me

@garibaysautodetailing3891 5 жыл бұрын

Does the orifice need to flush all the way down or just till it's tight? Because the orifice I have won't go down it stops half way..

@BlakesGarage 5 жыл бұрын

Just until it seats and it should be fine.

@im_wrong_because___________ 3 жыл бұрын

Why y’all hating it’s clearly thicker than before. He didn’t say “this is the thickest foam ever” no he was just stating that it was thicker than before which it definitely was

@dhansel4835 Жыл бұрын

Why did your foam stream start out with a wide fan and the next I saw a narrow fan spray about 30 deg ?

@Mindset4Excellence Жыл бұрын

I presume he just adjusted it. Personally, I think it's best to spray the side panels using in a horizonal orientation if the cannon allows rotation. Spraying vertically (especially if wide) wastes so much product on the ground and shooting over the car. The front, top, and rear of the vehicle is idea for vertical spray.

@tesla-sport3871 5 жыл бұрын

I love your KZfaq channel

@nickb5091 2 жыл бұрын

I noticed a lot of the 1.1 mm brass orifices sold on Amazon are also including a stainless steel mesh filter many call the “foam maker”… I wonder how much of a difference replacing that mesh filter makes?

@NickVetter 2 жыл бұрын

I noticed no difference between the filter that it comes with and the replacement. They look the same. It is nice in case it gets completely clogged.

@rfssport 3 жыл бұрын

Mine came with 4 nozzles and a black one. Does that mean I can spray 35-35 ft with the right nozzle? What ration water to soap? I want to soft spray my blackened roof. Thanks

@johnnybrowning470 Жыл бұрын

Yeah I believe you talking about the pressure washer not the foam cannon.

@dirtbikewrecker4475 3 жыл бұрын

This trick works!!!

@maxellsanjaya 2 жыл бұрын

Does this modify work with pressure washer under 100bar ? (i used karcher k2 which is had only 90bar)

@BlakesGarage 2 жыл бұрын

Yes helps on any low psi washer

@brady53anderson 4 жыл бұрын

Adjust your spray pattern. It’s to wide. You’re putting half the foam on the ground.

@kristinekoski7345 3 жыл бұрын

Great video ! But this might sound lame of me to ask ,,but I got the sj 1000 and I bought a foam canon but I can't seem to take the wand apart to connect the damn canon

@richnet12 2 жыл бұрын

Dont remove the wand. Just attach the cannon at the end of the wand like you do with a nozzle.

@ridered7262 4 жыл бұрын

Thanks for the video, I will have to go this route. I have a chemical brothers store not far from me so was wondering if I should buy one of their guns or like you did just a cheap one online.

@osteopata777 5 жыл бұрын

Your car was already clean ;-)

@spencer1320 5 жыл бұрын

I would put the hot water in the cannon first and then add the snow foam soap. Great video! I just got me a 1.1 and can’t wait to try it out. You have to get a short gun it is SO much easier!!

@AB-80X Жыл бұрын

Here's a question. What do you think that happens when all that cold water flowing though that lance hits that small amount of warm water? Some very thick soaps will dilute a bit better in hot water, but other than that, it doesn't do anything.

@jh.f30 3 ай бұрын

Helps the soap mix with the water@@AB-80X

@Wiraskyyy 5 жыл бұрын

Check out nerta active diamond foam, find it quit good. rinse all the dirts out with about 5% mixture.. My fav prewash foam

@toddhedge7794 2 жыл бұрын

That Zeppelin is a nice touch

@debbiemorgan-thompson5369 11 ай бұрын

I also bought a 1.1 orifice and it’s too small, just keeps on turning. So frustrating

@douglasbrmn2 5 жыл бұрын

Thanks for the tip. Just ordered one, hopefully I see a change. I pay way to much for my foam cannon soap not to get the most out of it.

@Coelacanth97 4 жыл бұрын

I bought this 1.1mm oriface for an MATCC foam cannon and when I removed the original oriface and compared it to the "upgrade" part, the hole sizes looked identical.

@jiovannymadrigal4335 3 жыл бұрын

@@Coelacanth97 yeah I noticed it was the same size as well. I think there was no point in buying this.

@LazyVic 4 жыл бұрын

Did u ever update ur hose on sun joe or u still rocking stock one

@BlakesGarage 4 жыл бұрын

Still rocking the stock one.

@MarkSegree 4 жыл бұрын

Do you know if the sunjoe can be swapped? I bought it from homedepot and I ripped up the box so now i am stuck with it

@Taylexwow 2 жыл бұрын

If you have a receipt you don't need a box to return to home depot

@brushrescue1701 5 жыл бұрын

I use my foam cannon with my Karcher eco-although it's not set on the eco-mode it doesn't do a bad job took it to my buddy's place changed the end put it on his petrol pressure washer wow what a difference with the form so it also has to do with the amount of pressure coming through Took it back to mine change the end again put it on my Karcher not to good .. took it back to his did the same thing wow

@bogey19018 2 ай бұрын

Do you still have to hand wash it?

@StraubelFilms 5 жыл бұрын

Any idea if this works for the foam cannon chemical guys sells? I have the same pressure washer and the foam isn’t as thick as I’d like.

@BlakesGarage 5 жыл бұрын

It literally looks like the exact same snow cannon. I think there bottle is different and they probably replaced the jet. But hey it’s five buck on amazon what could it hurt to try.

@StraubelFilms 5 жыл бұрын

Blake's Garage sounds legitness. Thanks for the reply man. Love the Chanel. I also have a e30 for autocross so I really appreciate the DIY videos. Keep em coming.

@gabrielcasias2070 5 жыл бұрын

Adjust the top nozzle for foamier soap

@georgemyers6518 2 күн бұрын

Also try using distilled water in the bottle. $1 per gallon from dollar stores. You’ll see even more foam

@poyo3582 5 жыл бұрын

That's lit

@larryhamblin3574 4 жыл бұрын

I seen people say that it works good on low pressures but i run a 4500pst pressure washer and this 1.1 is not for me my pressure is 4.0 gpm and i do fleet cleaning so this works great for low pressures but it would suck at high pressures

@AB-80X Жыл бұрын

Yes, and your point being? I would assume that rather than telling people that it does not work in your machine, you would tell them where and how to find the info on what orifice sizes they need and how to find out. I genuinely hope that if you wash cars with that machine, you use something like a 060 nozzle to lower that PSI, unless you're washing busses or vans.

@arfahchandra 2 жыл бұрын

My own orrifice is 1.0mm if i change it to 1.1mm does it work?

@AB-80X Жыл бұрын

No. Find a 1.0 for the foam cannon.

@stuart38 4 жыл бұрын

I bought this orifice for my proklean cannon,but it didn,t work properly.Any info,guys?Is it a particular 1.1mm orifice for a Karcher k2

@BlakesGarage 4 жыл бұрын

Just buy the foam cannon I recommended and put it in that. Problem solved for $15 👍🏼

@mikescudder4621 9 күн бұрын

Led Zep in the intro?? Dig it... the tongue twister too.

@mv8167 4 жыл бұрын

I am confussecd, is this only washing the car, but not waxing it?

@holdenguy75 3 жыл бұрын

So is the new orifice smaller or bigger than the stock orifice?

@BlakesGarage 3 жыл бұрын

Smaller

@john2510 2 жыл бұрын

I appreciate this video, along with your others, but I'm not sure why the fluffier foam is better. I get that it LOOKS better, but I can't think of a way it gets your car cleaner. It seems like the mod just increases the amount of air that gets mixed into the soap. If so, how does that clean better, at least after a certain minimal point? It reminds me of how the shaving cream companies used to sell their shaving foam - advertising how thick it lathered. It took me years to realize how much better it was to use a little soapy water and a brush.