Autolite 1100 Carburetor Rebuild

No video

Autolite 1100 Carburetor Rebuild - Part 1 Teardown

Рет қаралды 61,512

Күн бұрын

Disassembling relatively small carburetors like the Autolite 1100 can become a problem as it has many delicate parts. In this video, Mike will guide you step by step through the entire disassembly process, so you do not have to suffer any headaches while rebuilding the amazing Autolite 1100 carburetor.
Mike's Carburetor Parts www.carburetor-parts.com Mike's Carburetor Parts is happy to provide this informational video about the Autolite 1100 1101, 1 barrel carburetor rebuild. This is part 1 which includes the tear down of the carburetor. While there are some differences between 1100 carburetors, this video will give you enough information to help you rebuild your own carburetor. Part 2: • Autolite 1100 Rebuild ...
0:00 Intro
0:52 Taking Off Autolite 1100’s Fuel Filter
1:12 Removing the Electric Choke & First Diaphragm
5:57 Removing the Second Diaphragm
8:20 Disassembling Autolite 1100’s Upper Section
9:45 Removing Check Balls & Check Weight
11:57 Taking Out the Float
12:11 Removing Needle
12:45 Taking Out Autolite 1100’s Main Jet

Пікірлер: 28

@benfica327 12 жыл бұрын

Thank you so much. My 65 Mustang is my only car. The carb. works, but it does need a rebuild. I'm afraid to start work on the carb. and not have it done by a day I may need the car. Please make more. You have no idea how much anxiety this video removes from me. Thank you again.

@jfinley002 9 жыл бұрын

Awesome videos! Couldn't have done it without these videos. Thanks so much for making the videos on the 1100

@mustangman71092 12 жыл бұрын

This is great stuff! Thanks. I have the exact same model and will be rebuilding soon. Anxiously waiting for part 2!

@user-ih3gs4jk1b 6 жыл бұрын

Thxs. Really good surce of help

@otherstuffbybob 3 жыл бұрын

Thanks for the video

@zhgaming143 10 жыл бұрын

Great video thank you! Now if i need to take mine apart i can use this as a template.

@zhgaming143 10 жыл бұрын

okay cool. yeah until i do take it apart, ill def check your website out

@yeahitskimmel Жыл бұрын

Came here just for info on how to pull apart the exact bit you skip over at the very end

@rickyfreeman2311 2 жыл бұрын

So you didnt show how that rod came off at the very end, I still havent figured it out

@jackweisenburger 8 ай бұрын

I have this carb on my 62 Falcon 144, but at part throttle/cruising speed it struggles and doesn't really want to go. The head was ported, big valves and it has long tube headers, guessing I need to increase the jet size? At idle its very responsive to snap throttle and super smooth, but when you start driving it just feels very sluggish.

@wayofthewheel3543 3 ай бұрын

👏

@randysoulliere2431 9 ай бұрын

My old one has no provision for spark control valve ..new one came with it installed.. also new one has extra through hole at vac port

@MikesCarburetor 9 ай бұрын

The spark valve was eventually built inside the carburetor.

@oliverc3311 6 жыл бұрын

No part 2?

@jballs1118 Жыл бұрын

Good video thanks 🙏 I have a 65 mercury comet and went I drive about 200 feet the car dies. I set the correct timing did the spark plugs wires coil rotor cap don’t know why is dying any suggestions will be thankful

@johnm126 5 жыл бұрын

Hey Mike I just rebuilt a autolite 1100 . I had problems with flooding but got that issue taken care of. Now I am having problems with it stalling out when I take the choke off. It is a manual choke and have to choke it to get it started but when I go to open choke it stalls. Any suggestions? It is a manual choke and does not have 2 diaphrams

@coop84 3 жыл бұрын

Do you have a part 2 for the tear-down? Is there something that comes out from under the main jet? If so, mine is stuck.

@juancvelazquez6349 3 жыл бұрын

Mr Mike I just bought the same carb and seems like the linkage is backwards is something the you can show me how to reverse it please Sir!!

@louisruggieri 6 жыл бұрын

Do you sell the diaphragm spring I lost mine

@anthonypessagno7048 7 жыл бұрын

just wondering what the white substance is in the center of the carb...almost like ceramic or plastic?

@eegg6954 3 жыл бұрын

It's the plastic venturi. There were three different sizes; for the 144 motor, the 170 and later 200, and the early 200.

@davidherrington9845 10 ай бұрын

Trying to reach out to you to buy the 1101 one carburetor having no success please advise

@MikesCarburetor 10 ай бұрын

We don't sell any 1100 or 1101 carburetors. The only new one out there are Chinese and they aren't very good. Here is the kit: www.carburetor-parts.com/autolite-1100-carburetor-rebuild-kits Thanks Mike

@cjhill726 5 жыл бұрын

Hello. I have a 1960 f250 with a 1100 carb on it and manual choke. My carb only has one diaphragm on right side. I am looking into replacing the carb but can only find the 1100 with 2 diaphragms on it. Do you know if that will work on my truck since it has a manual transmission. Thank you for your time

@cjhill726 5 жыл бұрын

Also would it be a better option to go back with the original 1904 that came on the truck. The engine is a 223.

@cjhill726 5 жыл бұрын

Okay thank you. I appreciate it.

@willf5768 3 жыл бұрын

Why did you start with the double pumper and finish with a single.

@willf5768 3 жыл бұрын

@@MikesCarburetor Part 1 kzfaq.info/get/bejne/m6eZpcmW3dGxho0.html part 2 kzfaq.info/get/bejne/bsiXlpVizr-vqY0.html Part 3 kzfaq.info/get/bejne/b5ynoJucyLqliX0.html Notice the float bowl in part three it only has one diaphragm.