Automotive computer output theory, operation, and diagnosis.

Рет қаралды 5,637

4 жыл бұрын

Introduction to automotive computer output operation, theory, and diagnosis. Includes duty cycle.
(Recorded with screencast-o-matic.com)

Пікірлер: 8

@sheerwillsurvival2064 6 ай бұрын

Another great class . This guy is great teacher. KZfaq you got move this channel on the algorithm

@francisdsa6790 Жыл бұрын

Very nice explanation and tips on testing thankful to you sir🙏

@vladrybka8466 7 ай бұрын

Thanks.

@mikeadler434 Жыл бұрын

👍👍

@stever3886 5 ай бұрын

Just another comment. Can you show how to take a 3-wire sensor (input to CPU) and tell which wire is which without a schematic? One is ground the other is VCC and the other is the signal to the CPU. I suppose I could read the voltage at the sensor connector using a back-probe pin test lead with power applied by having the ignition key turned to position 2 (not the accessory position). I could get Ground and VCC using this method and by default the other is the signal pin.

@pigeonsil240sx 2 жыл бұрын

where i get confused is knowing if a wire connected to a pcm and module/device if its a input or output?many times i look at wire diagram and you have no way of telling

@craigsclass1462 Жыл бұрын

Inputs gather information (like we do through our senses), outputs do something, move something, etc. Like we do! It’s called biomimicry.

@liamruane353 Жыл бұрын

Very good explanation and getting the message across