⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info

Good video but I want to know how to determine which solenoid to replace and the method/procedure to figure that out.

No long drawn out video short simple and straight to the point thank you great video 👍🏽

Hello guys I got a A6FM1 4WD. My transmission has problems on 3rd gear shifting to 4th. It’s does not shift on time and the rpms go up and once goes into gear will bump hard but if I let go of the pedal will shift almost normal. Which solenoid do I need to replace ? What would you guys recommend for repairs ?

That is very helpful. I am thinking on doing this job on my 2010 santa fe sport AWD. On occasion I get a high Rev hard shift into I believe 2nd to 3rd. Seems to happen when I am coasting along not if I'm hard accelerating. I am looking for videos that will show me the way and helpful tips and info. Thanks for your help.

Of course, the thumbnail picture is at the end, where 4 links for other videos come up, so I can't see it in the video. But those look similar to the VVT solenoid for my 5.7 Hemi. The original screen broke apart on my engine. Then the Dorman replacements keep having one of the new style screens pop loose. It then slaps around at the edge of the valve, causing it to malfunction. I've discovered that the Dorman is junk. I've had to replace that solenoid on my VVT 5.7 Hemi, 4 times already. Since it's under warranty, I keep using the same replacement. But I put a retaining ring over the screens this time, similar to the new replacement from MOPAR. The thumbnail picture, just made me want to share about the Dorman garbage, that I have had to deal with. Guess I should have gone to the dealership and ordered the right part. LOL

Auto repair guys, can I do this cleaning to the VVT selenoid on the exhaust side as well? I replaced the intake vvt selenoid and I'm still getting an engine light for bank b. Any help would be amazing. I have a 2010 Santa Fe v6 3.5

Very thorough video Thank you

No one wants to take off the front end and radiator. To fix their vehicle transmission problem. However informative content. Might convince my coworker to do this on a weekend. His car has been having issues. Too bad Hyundai didn't design the sensors on the outside of the transmission. So you could easily access them

after you clean and check each solenoid should you hit the valve body with the same cleaner

i need to replace the lowest solenoid on the valve body as it sits in the transmission but cant find it on amazon with your link can you help

Do you know the torque specs for 2013 2.4 gdi bellhousing bolts

Hyundai amica 2002 automatic 1L. No movement drive or reverse symptoms? Shift lever smooth ok 😁

My car is going in drive n first then second then third it’s like I’m driving a automatic stick shift. Is it the soloneid

Hello, my name is Francisco Gotay, I'm from Puerto Rico, I have a 09 hyundai accent and it has problems with the transmission solenoid, code p0760.the car when it stays in gear 3 but you turn it off and on and it takes all the gears until it detects the problem

good day my friend i have sonata 2009 gls 2.4l with transmission problem on D not working properly Fails when switching form first to the second gear but its working with tiptronic properly SHIFTING SOLENOID make this problem?

What does it mean when stuck on 4th gear. I cant recall the code. I'll look it up again

Okay so how do you add the fluid you took out theres no dipstick in mine?

What if that ground wire was for the transmission control solenoids?

Which one controls 1,3,5 7 gears? My transmission for my 2016 is only working in 2nd, 4th, and 6th gears (and Park and Reverse). Or is that a different problem?

Cant find your video that has the diagram that explains which is which. NOTHING on the internet is showing me either

Does this apply to 2007 Elantra?

you have to take the engine out to do this?

Slow down😉

thank you for the video but the accents just wont let me pay attention, sorry