Well Hello, I realize it's been a while seen you posted this but.... I have a 69 Camaro convertible with power windows, I adjusted my windows by loosening all the bolts to just snug and slowly shut the door and it moved the bolts close to the correct position. I removed the regulator and adjusted the window to where I could lift it easily by hand and like you re-lubed the tracks. Also your windows moved very fast compared to mine, I actually disassembled the electric motors in the rears, cleaned and re-lubed the internals and got them to close the rear windows in just shy of 2 seconds. The front ones, the brushes and stator were too worn, so I bought news and installed them on the regulars and they close the windows as quick as the rears, I also replaced the switches they were getting hot from the motor drag. Any how I enjoy you videos, you are so funny!! 😆 Keep on keeping on, by the way, Mustang Central is gone now, I saw your video film there.😟 Well have a wonderful day and God Bless you. Take Care!!

Do glass adjustment from inside with door closed. Great tip to try with Modified Mustang this weekend! Thanks,great show!

I have bought parts from NPD before and wasn't impressed at all. I sent most of them back because they were made in Twain or some other country. I know you said you never did it before and I am not going to break your balls about that. The first set of adjustments are for the glass forward and back with a little in and out movement. It can take 4-8 hrs to properly do just 1 side. I am talking about none elec. and changing all the tracks inside. It's a tough job for sure. I am sure you helped out some people who want to try this on there own . Good job over all .

Have you done a video on installing the window felts and the chrome outer edge reveal molding??

I am going to work on my doors tomorrow or planning on it at this time

Nice!

Hi I was wondering if you were familiar with the windows on a 69 Mach 1.My question is, is there a gasket that sits in the metal tracks before you glue them in or is it all glue.

When both front and rear glass are out, which one do you adjust first? I’m assuming the front? Also? This is for a 68 Camaro convertible.

Some of what you are trying to do can be done with the back glass adjustment.

Working on a customer's 68 Camaro, his right door is wonky and wobbly. Used the new fuzzy glass guides at the top and they stopped the wobble, but his door panel is fighting the new parts going back on, tried rolling the top of the door panel over but that clip on the rear keeps bulging out the top. Any tips/advice? Great video by the by, thanks.

Lower the latch pin on the door jam.

they came from the factory with screws in the outside belt line weatherstripping

Do you have the measurements for the rear window opening? I put new quarters on and would like to know the vertical and horizontal measurements.

I have a 1967 Camaro and the driver’s side glass won’t go up the entire way to meet the top seal. Could this be the wrong glass in the car or faulty adjustment?

i have a 67 camaro drivers door rattles a bit and i dont see a spring on hinge was there a spring on a 67 door drivers side

Dang I wish my 69 Camaro doors fit and sounded that good

Camera people are pretty cheap, how many did you take out with flying old parts this time?

Chewbacca!

Girl is beautiful