Vehicular DIY has the soul of a teacher and communicator. Great vids showing BMWs can be taken apart and put back together in endless ways.

Always with the timely videos, I need to replace my lenses. Nice work!!

Very nice work! I need to do this to my E90, happy you posted this project, thank you for this installment! Look forward to your videos each week!

I had front end my car and crack the damn headlight cover. Went to the shop, took them like 3 hours to remove the headlight. Later, they send it to a specialist and i kid you not, they put my headlight in the freaken owen, i was schocked. I thought the guy will cook everthing in it but luckyly it did not happen and and he removed these covers in couple minutes without cutting it. Great video as always, keep up the good work !

Great workmanship, you have some very nice tools as well. Really enjoyed watching it. I’m considering restoring my headlights on my E91.

Quality. Don't need to do this yet but when I do I will be back to rewatch this a few times. Thanks 👊🏼

I learned a trick doing this just use a cardboard box. Stick the heat gun in it or hair dryer an put the headlight in the box and close it for a few minutes. And then take it out and pry the lens off.

The video editing and commentary is so efficient. Just the facts Ma'am. Perfect

This is turning out to be a dope project…. always looking forward to your video posts👍

Excellent video. Very clear instructions and demonstration

Great video again! You kill the details and perfection always !

Looks great! Great addition to your collection.

Damn, clean job brotha! Gonna have to try this out on the ol’ e90. Thanks for sharing!

Wow, what a result! Thanks for posting this!!

Great work! Really look forward to these videos!

It's always good practice to spray a coat of uv protection on top of aftermarket headlights because most of the time it's just raw polycarbonate, and without the protection, they will yellow faster than the OEM headlight.

Was about to open up my permasealed late E39 headlights with a dremel but I think this method with that tool might be better. I’m going to try this today!

That tool looks perfect for this job, i will definetly have it in hand when im rebuilding a pair of AHL for my E87! Only thing i would have done different is to try and clean the projector lense as it seems a bit foggy, and maybe the reflector to. But its a very delicate job to disasemble the chrome parts without ruening the chrome. Looks a thousend times better now tho! NIce work!

Awesome job. Solved an issue for me. Thanks for the breakdown.

Life saver! I was ready to look for new lci headlight bc I cracked mine. Sure saved me a ton of 💰

you've got talent and patience mate great video

awesome video! it was very satisfying seeing the new lense:)

Nice job. Thanks for posting 👍

Dude, you are a wizard! Thanks for sharing.

Very cool. Really enjoying seeing what you can do with a beater (we know it's not really a beater).

ive been scared to do this job for months now on my F30. thank you so much for this video

Brilliant work 👏👏👏👏👏👏

What a great job!

Absolutely stellar work, just not sure if I have the skill and patience to do this! Very impressive nonetheless 🙌🏼

Love all the vids man! Best diy channel by far.

Despite having sold my BMW for a G8. Still come back to watch every video. Your videos make me miss the E90.

Excellent video. Gives me the courage to try

Great Job! Thanks for sharing. Dutch regards, Nico

Awesome video!!! Of course the link is all sold out!!!! Looks like it pays for vendors to send you stuff😉

Love your videos .

Love your videos. Can you show the same DIY on how to do this for a Pre-LCI e90 bi-xenon? I have the popup washers and it seems impossible to remove the headlamp from the car (like some hidden bolt is holding it). Also the AE's have that light tube which could crack easily so I'd love to see how to safely do that job

Look. I don't even need to watch the video and I know it's going to be an informative video so I automatically like it lol. Clean cut content.

I used the Sylvania headlight restoration kit on my E92 and the end result was 95% as good as a brand new headlight. I took my sweet time sanding (40 min per side, with 3 different sandpapers) but it paid off.

Looking good.

Great video 👍🏻

Hey could you show a video on how to code in the car to fold mirrors when locking and close windows/sunroof? Thanks

So clean. Hope you can also get rid of those ugly amber reflectors for some smoked or clear ones!

Awesome video. Now I need to do my Ford Escape lens

Great video and sweet final product. Thank you. Do you know if there is a difference with the LED Adaptive lights?

I'm halfway through doing a F20 BMW 1 Series and it seems like they changed to a bonding silicone and metal pins! To remove the adhesive I tried silicone sealer remover which did soften it slightly. A drill works quite well for clearing out the channel!

Legend! :) have to do this, since mine are scratched a bit. Now i got the perfect instuction Video :)

Thanks for the video, I did the same in my E92 facelift I bought a couple of replacement covers on ebay from a Chinese seller, in 2 years they become yellow and opaque because of the lack of the UV additive in that plastic, did yours have the same problem? Where did you buy yours? Thank you very much

I want to know something after sealing back headlights did you face any leakage afterwards??

What do you think the stress cracks come from? I'd hate to replace the lens n just have it happen again. Do you think maybe the angel eyes are too hot? I know they have a brightness setting

Would be great to see video on how you aim them after replacement

How does the lens sealant works? It is no longer available is there an equivalent? Thank you for your response

Wow man awesome job and THANKS YOU, !!!! I'm really glad I saw this somebody backed into me just to three days ago and cracked my headlight and I have the adaptive full LEDs in my 440, and BMW wanted close to $5000 to replace the whole headlight but all that's damaged is the plastic lens. I didn't know replacing that blends was even a possibility you probably just save me thousands of dollars if I can't have the confidence to do it myself or try to find somebody that would be able to do what you did. I clicked the link you had listed in the description for the lens but it’s giving me an error code. Do you know where I could get one for my car at? It’s a 2018 440 Gran coupe with like I said, the adaptive full LED headlights. Again, thank you so much for posting this video and showing us what possible.

I bought some Angel lights LED rings to put inside of your headlights. So I'll have to perform surgery on my headlight just to have access? You can't just open it by unbolting couple screws?

Hi there… Excellent job man..!!! I have the same exact car with the same issue. Do you do this kind of job only on your cars..? Just wondering, if I can send mine to you.

That was a lot of work!

Good job

do you know where I can get the non-adaptive full xenon headlight ( i just love the look of them)

Hey there: I have a 2017 X3 and followed your video, but I can't, for the life of me, get the lens off my car. It's like they're using some new adhesive or something. Can you advise how long you heated the adhesive to get it softened? I tried the heat gun and the oven, and it's not budging. Any thoughts you have are appreciated!

Nice bro 👍 what is the name of the cutting machine you have used

How have the replacement lenses held up over time? Any yellowing or hairline fracturing?

Can you tell me what that metal circuit board is that clips into the trim that you install into the new lens? I broke it, and I want to know what it is

Thanks. I wished I watched this before I tried to do this. BMW is ridiculous with how they put things together. Taking off the bumper just to replace these covers is insane

I did this before. I’d rather buy new aftermarket headlights and not waste an entire day doing this again. It’s a much bigger pain than this video shows. And both of mine even though I did a great seal job ended up building condensation inside the housing.

I'm looking for E63 PRE-LCI lenses. Please let me know if they are still available somewhere...

Dear Sir, Thanks a lot.

I have a question.. On the e92 what bring power to fuses 37,38,39?

i have a 435i sport that i want to do the same thing to it. will the lense fit?

Hey, is there a bulb to change for the halo lights? I have a 2015 x3 and halo hex lights are turning yellow

Nice to know that you can purchase jut the lenses as opposed to the entire headlamp assembly, that's great info! I am curious to see if the alternative technique would work for these lights as well. I've retrofitted a number of headlights over the years and what I have always done to remove the lens is simply pop the whole assembly into the oven for 7-9 mins at 250 degrees F (after removing the screws of course). That heats up the glue without damaging the lights at all, or the internals, and then you can literally just pry the lens right off; with most of the glue coming with it. The one thing to take note of when using this method is just to avoid getting the glue on the lenses or the internals of the light, as it's very hard to remove. But if you're careful it can be done quite easily. Then, to reassemble, simply do the same thing in reverse. Put the new glue in the lamp, press the lens against it, toss in the oven and then when it comes out, you can literally press it all together again nice and even. Sounds like a good amount of work but it's just an alternate method of achieving the same result, and also you don't have to cut anything which means less dust! Either way, great job, solid DIY and keep up the great work!

Great video. So is there an option to buy just the lense cover on a 2005 BMW 750Li ? The entire new headlight assembly is 789$

I have a 2015 BMW X3 35i , 3.0. Can I replace the headlight lens instead of the entire housing?

hi how i can buy that headlight lens cover ? can i order its my one is F30 320 I

make sure to buy UV resistant headlight cover so the cover live longer before starting to yellow.

Clean job, anyone has any idea where to get the replacement part (the one that screws to the lens)?

Since these are aftermarket lenses I'm assuming they don't say BMW near the top? Or is that not on the lens itself but on another piece inside the headlight? I looked at mine but couldn't really tell.

Thanks

Do you offer the service? 15 550 MSport and I have the HELLA replacement lens handy

You should do custom headlights for the E90. Would be a very popular video I think!

You did a great job! I have these exact same headlights. Can I send them over to you? 🙏🏻

sliplo protector $99 Amazon for the CF front splitter for your M tech bumper. $300 Ebay rear 550i quad pipe bumper, $300 cf diffuser, modify the stock pipes to quad, muffler delete Doing this now to f10 2015 Msport 528i. Singapore grey 20s, BMS tuned, CAI N20

This is nice details exactly what I was looking for. My bmw has condensation in one light so they want to charge me $1300 to replace whole thing. Now I see it’s because they have to take off the whole front bumber:(

Was trying to get the eBay link with no success , can you please help me with that ? How many meters for the glue ?

The intro made me laugh😂

I did this job in December and now I have the inside of the headlights full of moisture. how can I remove this moisture?

Good job!! My light lens still looks decent but it will need to be done soon. Do you know of a headlight tinted cover you and take on and off for night time driving? I was considering making one but I’d rather purchase.

I highly recommend for everybody to clean the xenon lenses and reflectors as well. You wouldn't believe how dirty it is after a few years and it will make a more than noticeable difference in light output.

Pretty much ‘ Major surgery’… but you did it with surgical precision!!

Thanks for the video. However I’m definitely just going to replace the whole headlight. $160 more expensive, but infinitely more easy and don’t require any cutting lol

You’re a badass but after watching this I’ve definitely decided against doing this since I’ll probably mess it up along the way. You did awesome tho great job.

I used to work on testing such headlights. I can tell you touching the chrome will be fine. While it will get dirty, it will survive.

I don’t know why BMW stopped making the headlight lens that were held on by tabs. So much easier to change lens.

Do you have international shipping?

sir where to get good quality complete lense for e60 m5 lci

do an xpel film protection & if it turns foggy after many years just change the film. that will make it clear & shiny for ever

I think I’m gonna give this a try. Maybe even try to get rid of the chrome

Great detailed instructions as always. Looks great but a second option for those that don’t want to perform surgery on the front end. Sanding and polishing should do the trick however you did mention it all depends on the degree of weathering on the lens. Keep up the great work

Are you located in LA ? I need this done to mine 😭

Do you have a shop that I can send my headlight for you to do it?

Sir where to buy the lense for e60 lci

Please make something about N54 I'm hungry for new content , BTW I wish I can find lens that cheap for my 135i