Great video. The guy in the green Shirt looks like John from Scotts solar in Arlington Texas.
@valle2565 жыл бұрын
amazing! def saving this video for future reference. i plan on offering PPF to my customers next year :)
@AveryDennisonVideo5 жыл бұрын
Music to our ears!
@31186dan2 жыл бұрын
I appreciate the video
@useryggfdcc3 жыл бұрын
Excellent video, so many tips Which will help me.
@muntadar52103 жыл бұрын
what is the difference between the SPF-XI and Supreme Defense ?
@paulff35 жыл бұрын
How does it compare with Xpel and 3M? Price, performance etc...
@TheFrenchMC4 жыл бұрын
PAUL F its an Avery video, there just gonna tell you Avery is the best
@nimmakurimoses70434 жыл бұрын
Thq so much
@ciensuk3 жыл бұрын
Thanks for this video. I never wrapped before and wonder whether I can do this "wet wrap" method using Oracal 651 (Intermediate Cal - it has permanent adhesive) on my car (Hood, Roof & Trunk) in one piece I don't want to arguing about ideal way to do this (dry method & knifeless tape etc, as many Pro suggestions), but want to stick to this way (wet wrap) with some reasons. I need your advise here about: A. Glassing process (since there's a solution underneath) As on your video the first step would be squeegee out the solution & also the air from underneath the vinyl. B. After above process (A), which section should I squeegee first? Lets say in Trunk; The flat surface or the curve one? C. Post Heating Same time frame as Dry method? (After 30 min but no longer than 12 hours) or after 24 hours? Thanks before
@AveryDennisonVideo3 жыл бұрын
Hi there, Thanks for your inquiry. Please connect with our Graphics team for more info about your questions, they're our experts! graphics.averydennison.com
@xxiv22473 жыл бұрын
I got a job in this and man it was frustrating as hell i moved on from it but man was it annoying lol
@coblaze12 жыл бұрын
great vid! how do you cut around badges?
@L3BNaNi4 жыл бұрын
Most shops offer full body protection but doesn't include rooftop, should i add to rooftop also ?
@AveryDennisonVideo4 жыл бұрын
You definitely can!
@badyboye12 жыл бұрын
Hi, first off amazing job. Did you guys use at 5:22 have to use any kind of heat gun to push down on curve area of the hood? thanks in advance.
@paulamegadya14512 жыл бұрын
Can you just use slip solution and skip the tac solution? I would think just the SS allows for more play time.
@badyboye12 жыл бұрын
also what kind of steam gun and heat gun do you recommend?
@europeanMW4 жыл бұрын
what steamer is that? Justin showed it to us in Miami and forgot to write down the brand.
@AveryDennisonVideo4 жыл бұрын
Hi there, Reach out to our Graphics team, they know best! graphics.averydennison.com
@mahmodulhussain56402 жыл бұрын
Wow very nice ❤️
@liviupetre12903 жыл бұрын
👏👏 i see how you cut in the paint straight with the blade , that paint is not gone be scratch 😂😂😂
@jgquattro4 жыл бұрын
Where can I get that cutting tool? Can’t find one anywhere and looks comfortable. The wide-mouth encased cutter.
@AveryDennisonVideo4 жыл бұрын
Hi there, You can find all our tools here: graphics.averydennison.com/en/home/graphics-products/vinyl-wrapping-application-tools.html
@josearnelamoguis37323 жыл бұрын
How much 1 roll 60 inches here in Philippines with shipping fee
@padmanaban111ramalingam34 жыл бұрын
This metirial available in India
@AveryDennisonVideo4 жыл бұрын
Hi there, You can find a distributor near you, using our tool: graphicsap.averydennison.com/en/home/where-to-buy/distributors.html
@mohammednomaan76203 жыл бұрын
@@AveryDennisonVideo I need in India hyderabad . Can u send me location .please .
@chimpei39653 жыл бұрын
Hello, sir! Did you leave the PPF on the Porsche's logo badge?
@useryggfdcc3 жыл бұрын
I guess not, saw some install videos where they cut around a badge.
@kobequeque56504 жыл бұрын
Would you recommend doing this over clearcoat that is barley started to fade
@AveryDennisonVideo4 жыл бұрын
Hi there, Be sure to connect with our Graphics team for more info, they're the experts! graphics.averydennison.com
@fatalostriches86183 жыл бұрын
The film has to adhere to clearcoat so unfortunately not going to work if the clearcoat is gone
@BellaviaSigns4 жыл бұрын
great Video
@767dag3 жыл бұрын
What’s the cost to do that on same car
@hienthanh10372 жыл бұрын
Can you give me a website to buy these tools?
@luxuryviplifestyle94942 жыл бұрын
Great and we need and wish videos in Real Best 4K 60fps HDR resolution clarity quality soon please and Sound in full HD 3D Stereo
@cplcouture4 жыл бұрын
Can it be used in cold weather like Canada?! Can snow, ice or snow brushes dommage the film?
@AveryDennisonVideo4 жыл бұрын
Most definitely! Connect with our team for more info: graphics.averydennison.com
@flawns4 жыл бұрын
Where do you guys get those large rolls? I can't seem to fnd any. That's what I need to know
@AveryDennisonVideo4 жыл бұрын
Hi there, Which country are you located in? We can help you find a distributor near you.
@flawns4 жыл бұрын
@@AveryDennisonVideo United States. California
@AveryDennisonVideo4 жыл бұрын
Hi there, You can use our tool to find a distributor near you: graphics.averydennison.com/en/home/about-us/locations.html
@zacksaroeuy97233 жыл бұрын
What kind of steamer do you guys use?
@AveryDennisonVideo3 жыл бұрын
Connect with our Pros to find out! graphics.averydennison.com
@PNOIZErKOOL4 жыл бұрын
Can i install ppf on top of a car with ceramic coatings?
@AveryDennisonVideo4 жыл бұрын
Hi there, Great question! Connect with our Graphics team for more info, they're the experts! graphics.averydennison.com
@meerajose29703 жыл бұрын
Hey mate, do u ship to Australia?
@AveryDennisonVideo3 жыл бұрын
Hi there, Yes we do! Use out tool online to find a distributor near you: graphicsap.averydennison.com/en/home/where-to-buy/distributors.html
@nidhi12373 жыл бұрын
Can the glue damage the paint? Or when the film is removed, does it cause any damage?
@FAKAMUSHIN2 жыл бұрын
Nope , it protects the paint of the car. BUT ! if you use a very high alcohol mixture to apply the ppf and you don't squeegee it out , it can get stuck between the ppf and the car that may damage the clear coat. but the chance of that happening is minimal so.
@richards7334 жыл бұрын
Who in New Jersey do you recommend?
@AveryDennisonVideo4 жыл бұрын
Hi there, You can find all our certified installers here: graphics.averydennison.com/en/home/resources-and-learning/find-certified-installers.html
@mikey98234 жыл бұрын
is this product sold on amazon?
@AveryDennisonVideo4 жыл бұрын
Hey there, You can purchase it through one of our distributors: graphics.averydennison.com/en/home/about-us/locations.html
@apogeedetail5 жыл бұрын
Can you recommend a good degreaser?
@anthonycraig2742 жыл бұрын
Isopropyl alcohol.
@Archeagle5 жыл бұрын
What steamer do you use?
@AveryDennisonVideo5 жыл бұрын
Hi there, Connect with our Graphics team directly for more info! graphics.averydennison.com
@blohtv10913 жыл бұрын
Hi brow I want to aply
@ankurvishwakarma31314 жыл бұрын
from where we can purchase this??
@AveryDennisonVideo4 жыл бұрын
Hi there, Which country are you located in? We can direct you to the distributors nearest to you.
@ankurvishwakarma31314 жыл бұрын
@@AveryDennisonVideo India, Utter Pradesh, Basti
@ankurvishwakarma31314 жыл бұрын
@@AveryDennisonVideo I need this paper
@BilalAli-yl1oj4 жыл бұрын
where can I find this stuff? trying to buy some
@AveryDennisonVideo4 жыл бұрын
Hi there, Which country are you located in?
@BilalAli-yl1oj4 жыл бұрын
@@AveryDennisonVideo USA im trying to find a 4'x5' section for my hood
@AveryDennisonVideo4 жыл бұрын
Use our tool to find a distributor near you: avydn.co/2XwapXo
@benjaminavellaneda62605 жыл бұрын
Hexis bodyfence??? Yes or no
@AveryDennisonVideo5 жыл бұрын
Check with our Graphics Solutions experts! graphics.averydennison.com
@maysammemon98385 жыл бұрын
I'm buying this material from India
@aravindrafa41044 жыл бұрын
From where did u purchase?
@aravindrafa41044 жыл бұрын
How much is it worth?
@loaybouhaltit87172 жыл бұрын
hello you do it very nice job I want working with you if you want
@rogeriofargiani74135 жыл бұрын
👏👏👏👏
@zachdiaz19272 жыл бұрын
I do not recommend clay baring without at least polishing afterwards
@bigboss.anthonyromero.47682 жыл бұрын
Really hard to follow the procedures with this guy. Doesn’t really pause and he has an annoying voice.