With this controller set up, I've got some notes for people to be aware of. These are NOT flaws or problems, but potentially a "gotcha" so you can be ready for it. 1. When using a mixture of cameras(we have 2 AVKANS and 1 FoMako-based camera), be mindful of what is and is not supported by the chosen control protocol. For example, power on/off is supported by VISCA and Sony-VISCA, but not ONVIF. So some functions may not be available depending on the protocol used to control the camera. 2. Similar to the above, your experience actually using the controller will also be affected by the protocol used. Off my sample size of 1, my FoMako-based camera gets much finer pan/tilt control over ONVIF, but using VISCA, I have degrees of control over zoom speed, but seem to lose smoothness in pan/tilt operation. 3. Even if a camera is not currently assigned, a short press on any of the Cam/F buttons will initially force a connection to a non-existent camera. Best bet is to simply reassign these to a function as a short press until you need it as a camera key. Makes life easier. I have F4 and F5 set to mute since those would be invisible mistakes. F6 is set as shutdown, so that's pretty scary, but eh. 4. When powering a camera on, the controller may first try to power the camera off(it'll give a power off prompt first). Simply press it again, it will show a power on message and the camera will come to life. Some cameras take longer than others. Test this function so you know how long to expect boot times to be. Basically, make sure to test each PTZ camera you have on each protocol it supports to see what the tradeoffs will be and then settle on it. You can switch the protocol on the fly, but that isn't something I'd want to be live switching while broadcasting too much. Very pleased with the controller overall, makes life in the booth a little easier.
@MA16v3 Жыл бұрын
Out of curiosity, I'm wondering a couple things: 1. How big is the deadzone of the joystick? Put another way, how far do you have to move the stick left, right, up, down before it actually makes the camera move? 2. Does the rocker have varying levels of zoom based on how much it is pressed? Is it affected by the zoom speed setting?
@IceTeaMan022 Жыл бұрын
It looks like the birddog controller too. I like the look of this controller but i do like the ptz optics new ptz controller that has the hdmi output as well.
@clester78372 ай бұрын
Hello AJ, what PTZ controller would you recommend, we only have 1 PTZ camera at the moment although we have 2 more that are not PTZ but hope to upgrade to PTZ in the future? Thank you and keep up the good work.
@AJaytheCEO2 ай бұрын
I would recommend this one. I use these for all my installs unless the client asks for a specific one
@MrCuzzinsmooth5 ай бұрын
great video AJ. I have the controller but the preset options don;t work. Camera movement great. Zoom, pan, and tilt; great. but no preset. Any thoughts?
@AJaytheCEO5 ай бұрын
You need to use number then function. Also make sure you do not have quick actions enabled when setting up the presets
@mrlive305 Жыл бұрын
can u help i just got this and im lost in ip part
@AJaytheCEO Жыл бұрын
Which part? The setup or assignment
@mrlive305 Жыл бұрын
@@AJaytheCEO bro i got finallly everything communicating but the software
@mrlive305 Жыл бұрын
@@AJaytheCEO Hey man, I just finished setting it up and what to thank you for your help. My system is a little bit more different i guess and in the software issure i was at a blank but the peple at Avkans actually pulled through big time! I was able to set up and live stream
@AJaytheCEO Жыл бұрын
Awesome
@streetsofdestinychurch Жыл бұрын
Snap!
@francis4151 Жыл бұрын
Hi Ajay, great review as always. Please does this joystick work with the AVKANS AV-E20-NDI you reviewed a couple of weeks ago?
@AJaytheCEO Жыл бұрын
Yes it does
@francis4151 Жыл бұрын
@@AJaytheCEO Thanks
@francis4151 Жыл бұрын
Does the AV-E20-NDI IP control only work with this joystick?
@balchitvaruba977210 ай бұрын
Hi, My question is. If you have 2 controllers, 1 is at the studio and the other is at the streaming venue . Can i work from the studio with it when everybody is at the streaming venue ? Thx
@AJaytheCEO10 ай бұрын
Yes that is how mine is set up
@balchitvaruba977210 ай бұрын
@@AJaytheCEO Thx
@distrubia Жыл бұрын
AJ - I purchased 3 AV-CM30 and 1x AV-Joy-IP - the system finds the cameras and controls them well. But sometimes after just a few mins, all 3 cameras are 'timeout' and no light on the led buttons. However, full control is still possible, pressing cam buttons 1-3 selects the cameras - but always complains about 'timeout' so no LED light. Very weird - have you seen this before? I'm using static IPs for all units. Cameras and Joystick are the only ones on the POE - any hint AVKANS support is no show - email them twice already
@philscott7949 Жыл бұрын
Does the outro have to be 65db louder than the dialog? Everyone came running to complain.
@AJaytheCEO Жыл бұрын
Sorry this was done at 3am in the morning. I forgot to lower it
@eugenestanley92423 ай бұрын
Hi, How do I find the ip adress for the cameras in order to program with the joy stick?
@AJaytheCEO3 ай бұрын
Run the search function on the joystick. It will find them if you have everything connected to your network
@eugenestanley92423 ай бұрын
@@AJaytheCEO I TRIED THAT THE CAMAREA DO NOT SHOW UP. DID SEARCH STILL NO CAMERAS. Tried calling avkans still no help...also tried inquiry still nothing. checked ip...still nothing. what's next?
@djkraze01 Жыл бұрын
How do you set or make a preset?
@AJaytheCEO Жыл бұрын
Move the camera to the desired position. press the desired number for the position you want and then Preset.
@BrotherSid Жыл бұрын
Hi jay great video helped a lot, we just purchased the avians 2ox and the Ava’s joy stick. The person that did the install set everything up but didn’t not set them up to the network, my question is how do I set the. Up to the network. I need to get the computer camera and joy stick all on the the same ip group so they can communicate. I have a issue with not being able to adjust the iso and brightness so my live stream are over saturated. Thanks
@AJaytheCEO Жыл бұрын
I would get the CMS app which should be able to see the cameras and modify the IP addresses
@BrotherSid Жыл бұрын
@@AJaytheCEO thanks any specific one
@ArtTistic Жыл бұрын
Hello AJ, how do you select the cameras preset white balance with this controller. (Indoor, outdoor,) I can only seem to get auto, manual, and one push....
@AJaytheCEO Жыл бұрын
You would need to access that via the cameras menu
@Hidke Жыл бұрын
Please i need help to connect or set up. Please help
@AJaytheCEO Жыл бұрын
What is the issue?
@Elpuchungosexy Жыл бұрын
IS there any way to use the AI auto track with the regular cameras that do not say they have it??
@AJaytheCEO Жыл бұрын
Sadly no
@Elpuchungosexy Жыл бұрын
@@AJaytheCEO Thanks!
@michaelwade3727 Жыл бұрын
I am having a hard time settling the IP for my Avkans Camera
@AJaytheCEO Жыл бұрын
Which ptz do you have?
@michaelwade3727 Жыл бұрын
@@AJaytheCEO the ptz 30x
@AJaytheCEO Жыл бұрын
Use the upgrade tool on their website. This will allow you to set the IP addresses
@michaelwade3727 Жыл бұрын
@@AJaytheCEO thanks they did it for me very quick in the Chinese language yesterday.