Awesome Earthmovers Spend Time With the Fox Group & MUCH More! Chronicles Ch

Рет қаралды 48,533

7 ай бұрын

Welcome back for a another Chronicle. This 1 is special as Awesome Earthmovers are in for a couple of days doing a piece on Liugong/Foxy/Baz and the Fox group in general. Lots going on in this 1, it went a little long but I cut as much as I could while keeping it on track & showing most of the jobs I could.
Merch Website welderfabber.uk/
Awesome Earthmovers: awesomeearthmovers.com/
Awesome Earthmovers: / @awesomeearthmovers
Expander website: bit.ly/46hOntk”
Check out our new sponsor Autovolt!
Autovolt is a software that helps businesses manage their parts, sales, and stock. It makes selling and buying parts easier, keeps track of invoices, and can be accessed through any browser online.
Check Autovolt out Here
autovolt.uk
Follow them here.
/ autovolt.uk
#weldlikeapro #welderlife
Thanks for watching, subscribe and smash the like button if you enjoy my content, hit the notification bell so you don't miss my latest videos. Featuring Welding, Fitting, Heavy Machines, Cutting and fabrication.
Follow Baz here.
/ welderfabber
Follow Cal here.
proweldcal...
Follow Luke here.
esab_luke?...
Thanks to / @vinceopra for the editing tutorials. (beginners guide)
For masterclass visit www.magnetic-creator.com/ (I highly recommend it)
Linkedin / baz-martin-52a83026b
Linktree linktr.ee/welderfabber
hurtplant.co.uk
www.foxgroup.co/

Пікірлер: 155

@markrobinson1458 7 ай бұрын

Bet those lads of yours love it when you drive out of the yard 😂😂😂👍

@welderfabber 7 ай бұрын

Yeah I think so too mark

@markrobinson1458 7 ай бұрын

😂 you're a top bloke and possibly Fox's greatest asset 👍

@tavspeed1101 4 ай бұрын

think they will have a lot off respect for him,might micro manage

@tavspeed1101 4 ай бұрын

but kettle will be on,yorkshire tea of course

@martynm7659 7 ай бұрын

Good Morning Baz and Director and all welderfabber fans, excellent video once again. Having been in a completely different industry ie financial sector I find your channel very fascinating and therapeutic. Having seen foxy a few times he seems a decent down to earth chap who has worked his way to the top. Hope you all have lovely weekend ❤

@ianjbuilder7655 7 ай бұрын

Top vid chaps great to have a 1hour show ❤❤ great insight into welding lot more involved than the average person thinks .

@welderfabber 7 ай бұрын

Glad you enjoyed it Ian

@jamesward5721 7 ай бұрын

When Luke was welding on that rotator - or any time you're welding with rods - an air needle scaler is mint for cleaning off the slag - makes it go much faster between passes.

@welderfabber 7 ай бұрын

We sometimes use them mate

@SuperTone35 7 ай бұрын

Yes james i agree. And as icweld says “it peens the weld too”

@SuperWayneyb 7 ай бұрын

Amazed how you keep your van cleaner and better organized working in mud and pissing down rain than most of us who never leave tarmac 🤣🤣🤣🤣🤣🤘😎🤘 Great video as always 👍👍

@welderfabber 7 ай бұрын

I was taught always clean your bench an tools from day 1 after a job I just do it with everything

@SuperWayneyb 7 ай бұрын

@@welderfabber 👍👍

@petegraham1458 7 ай бұрын

Nice video, I am a retired engineer originally from Western Canada , we lived in England , Cheshire outside Manchester in Alderly Edge , I remember seeing the Fox trucks and equipment, my wife and I enjoyed our time in the UK but I will say we don’t miss the weather, just the people. We live in the Southeastern USA in retirement I spend most of my time in my workshop, glad you decided to use a different rod I was yelling you need to spark test that casting on the clam shell I think it,s Gray cast iron! You need some preheat and post weld cover for slow the heat loss .

@welderfabber 7 ай бұрын

Thanks, it amazes me I’ve got people watching all around the globe. Very humbling.

@danielprice7903 7 ай бұрын

I used to look forward to the weekend to go out on the lash, now I look forward to them coz I know there is a new welder fab vid coming out , my favourite channel by far , thanks guys keep up the good work

@welderfabber 7 ай бұрын

thanks dan

@philmulrooney7020 7 ай бұрын

Baz is the best teacher👍but he’s a great student👌every days a school day and never forget it.

@welderfabber 7 ай бұрын

Thanks phil I'll be learning till the day I die

@seanmountford9625 7 ай бұрын

Morning Baz really enjoying the machine repair videos and nice to meet the fox keep up the great work thanks Sean.

@welderfabber 7 ай бұрын

Thanks 👍

@lemmy9996 7 ай бұрын

No CEE this week , Baz and The Director are filling that gap!!👍👍

@ypaulbrown 7 ай бұрын

making me stay up all night here in the US watching your videos BAZ and Director.....cheers, Paul

@welderfabber 7 ай бұрын

Good lad Paul 🫶

@ypaulbrown 7 ай бұрын

@@welderfabber at 71 years old, I try to be....have a great day off on Sunday....Paul

@col2lin 7 ай бұрын

I am 1 of your earlest (subscriber) watchers. I have noticed that you like/want everything done yesterday. You get who you have deligated for that job, explain what/how you want done. Before you know it you are doing the main work with the welder just watching. There is a saying "You don't keep a dog & bark yourself". As a watcher I am greatful for as you go to a lot of trouble to explain, even I understand what is going on. You showed us your daughter saying that she is learning to weld. Please do that asap as there are a lot of girls that would bit your hand off if they knew/saw that anyone could weld & even do it well.

@welderfabber 7 ай бұрын

Its just when I get the time but it will happen

@jamesbarnes7802 7 ай бұрын

Baz your attention to safety is something that always impresses

@keithrogers2107 7 ай бұрын

Excellent video , really varied content,starting to see the characters in the team getting used to being filmed working , lukes seems a bit of a lad !!

@charleynewell6604 7 ай бұрын

Brilliant video again lads keep it up

@vinnypassmore5657 7 ай бұрын

Morning checks! Everything is broken on early morning checks, it's always raining and cold when those defect sheets are handed in lol...thanks for sharing have great weekend guys.

@welderfabber 7 ай бұрын

cheers vin

@partyrock247 7 ай бұрын

Feels good to come home from a week of working on machines, to watch other people work on machines 😁

@tavspeed1101 4 ай бұрын

love your vids from your background exactly started off structurall steel then got into heavy maintenance,i know when plant breaks down has to be done bodged get it running whatever,dont forget the lads have a life will work weekends at the drop of a hat but have a family life as well

@jimsvideos7201 7 ай бұрын

If I can share a little expertise with the dye penetrant: After the dwell period, wipe the excess dye off with a clean, *dry* wiper. Then wipe the inspection area with a new wiper with a very little bit of cleaner on it. Then apply developer. That'll get you the best sensitivity. You can put the dye on by spraying it onto a foam swab, if you want to avoid overspray.

@welderfabber 7 ай бұрын

thanks jim, always good helping explain better than I show

@ypaulbrown 7 ай бұрын

great comment Jim....

@markmawson1 7 ай бұрын

People only want to see the director because you have portrayed him like the Stig lol

@Stillgotallmyfingers 7 ай бұрын

Looking forward to those screener legs working 🤙 Great video Baz & team 🤙

@14sgdpg82 7 ай бұрын

drill a hole at each end of the crack only 1/8 inch pin hole but will release alot of tension in the metal great vid , lukes a good lad top man baz n director

@welderfabber 7 ай бұрын

yup

@joggingmixlondon6895 6 ай бұрын

An excellent video. Congrats on your recognition Baz and congrats to Daniel and Fox too. Keep up the good work. Take Care🎉😊❤

@GrahamWP58 7 ай бұрын

Great Saturday video Baz plenty of different content already watched the dipper arm pin replacement. Looks like the Director is getting famous. Crack on lad to the next episode.

@welderfabber 7 ай бұрын

Thanks 👍

@somegeezer4840 7 ай бұрын

After getting out of the hospital, I need a good length Welder Fabber video to take my mind off things 🙂😄

@garrybeard7718 7 ай бұрын

Fantastic video baz. now how about introducing your team in full Fantastic video mate stay safe all. 👍👍👍🍺🍺🍺

@welderfabber 7 ай бұрын

haha garry they on the clock, you'll see more an more as we go

@MrPlumberguy23 7 ай бұрын

he knows that young man is in the hunt for a top job!

@snowflakemelter1172 6 ай бұрын

We use the pure nickel rods on cast iron boilers but we preheat and then only very short runs so the heat doesnt build up, gently gently is the way, then we cover with a fire blanket and leave to cool very slowly . Small parts is better to bury in dry sand and let cool overnight.

@abuubaydullah1 7 ай бұрын

Yet again more insight on how the gears turn with each other its amazing how they do and every video the Director misses nothing which in its self is a amazing feat to say how long he has been filming great content Baz as always most enjoyable everytime you make me feel asa if i'm there with you lads .

@TruckerMRB 7 ай бұрын

Enjoyed the video chap...Excellent

@bryansmith3353 7 ай бұрын

Top quality content as ways

@fredrickugarner8278 7 ай бұрын

A great taste of what goes on by a great leader and teacher

@Blackopsmechanic338 7 ай бұрын

Another great start to the weekend. Excellent work. Peace

@davephillips5040 7 ай бұрын

Hi Baz didn't think adblue could come in contact with metal ie the tank on fuel truck oram I wrong ..great content director..keep videos coming 👍

@welderfabber 7 ай бұрын

Stainless steel tanks are ok mate

@edwinirwin6222 7 ай бұрын

Enjoyed video, all that crushing equipment is made in a 15 mile radius of me ,they must have all worked for finlay years ago

@trevorbennett4435 7 ай бұрын

13.04 Oreyt Shag, do you want me to watch you back LOL. You guys just get better and better. Wonderful to hear our northern accent and sayings in your content.

@MG-COFFEE 7 ай бұрын

Naughty boy Luke lol keep up the good work it's people like you who keep the country moving

@SuperTone35 7 ай бұрын

Best episode yet Baz. You cover a lot of interesting ground. Love the technical bit on the welding rods and then showing the application (and explaining it)👍. Video was produced at a good pace, always on the move, loads of interesting info.

@welderfabber 6 ай бұрын

Thanks 👍

@thelightofficial666 7 ай бұрын

" I just like to know I can still do it" Love ya Baz

@rossnolan2883 7 ай бұрын

Fantastic 😊😊😊😊

@matthewc.419 7 ай бұрын

" lil blue on the pull " !!!!!!!!🙈

@jamiewall9076 7 ай бұрын

Another great video showcasing what you and the boys do, and an hour + long fantastic !

@welderfabber 6 ай бұрын

Next Saturdays is over a hour too.

@tomganze7548 7 ай бұрын

Love the videos boz watching from across the pond i have driven and operated equipment for the last 37 years really enjoy seeing how its done in another country keep up the awesome work

@J4YJJ1 5 ай бұрын

Baz (Barry) ive been operating machines for 36i'sh years now an got to say your self an the director r a pure CLASS act love the content plz keep it up Thanks J

@johnkinsella4802 7 ай бұрын

Well lad, that tank in QA440 is just a return manifold, the oil returns from various rams and motors return to that manufold and then 1 return line to return filter in hyd tank

@Georgiee.and.Dan. 7 ай бұрын

Fantastic way to start the weekend good morning baz n direct 👍👍👍👍

@Herts1874 7 ай бұрын

We're is the Director. Brilliant 😂😂😂

@korzer 7 ай бұрын

I was laughing too, like he's Banksy or something.......

@crazyedits50 7 ай бұрын

Morning pal thanks for another great installment in the lives of you and your crew. Things have come a long way since we were welding with gas. Luke is a decent lad you seem to have struck it lucky there . Hope you all have a good weekend and looking forward to tomorrows video 😊

@welderfabber 7 ай бұрын

Thanks pal, no episode/chapter tomorrow

@crazyedits50 7 ай бұрын

@@welderfabber ah ok pal no prob

@russjam121 7 ай бұрын

Morning baz and director. Its the weekend and welderfabber kicks it off 😊 perfect 👍

@noelkenny7504 7 ай бұрын

A top video as always Baz and team

@welderfabber 7 ай бұрын

Thanks 👍

@keithbrueton 7 ай бұрын

Super as always Baz and the team, Luke is getting really interesting now also

@harrycrowther3491 6 ай бұрын

class you baz so calm top guy

@welderfabber 6 ай бұрын

Cheers harry lad

@mathiaslewen1953 6 ай бұрын

I really like your channel. Quality content every time. It will be intresting to see the longterm function on the expanders. Also if you can find some bushing that has gone even longer down the out of shape path and see how it works!

@BrewPub 7 ай бұрын

Baz, this is now my favorite channel.

@welderfabber 7 ай бұрын

Cheers… thanks for watching

@ypaulbrown 7 ай бұрын

40:00 love the new Auto dark filter for camera work Director..... no green tinge.....BAZ did you right getting that filter...... cheers, Paul

@J1M8O822 6 ай бұрын

Love this channel, it’s the only videos I never skip or fast forward, keep up the great content, as a HGV machanic for 25 years , I must say the plant job looks very interesting and rewarding

@welderfabber 6 ай бұрын

Thanks 👍

@J1M8O822 6 ай бұрын

Also the fact you are a Milwaukee fan makes the videos that much better, no offence struggler 😂

@korzer 7 ай бұрын

Big up Director

@stuartsmith7618 7 ай бұрын

Yep I reckon 50k subs to the channel and you and the director should do a live chat with both of you and the team in the workshop

@welderfabber 7 ай бұрын

50k is a long way a way we'll see, dont think director will partake thou

@JonDingle 7 ай бұрын

A great installment young man. When I have welded cast in the past, I use a high nickel content rod. Pre heat as you know, weld and peen with a needle scaler as I go and then wrap up to keep the weld area warm. As per usual, we see top work, top team and top content!

@jacobpace4716 7 ай бұрын

I reckon Baz left that gas on just quietly!

@suresren 7 ай бұрын

Hi Bazz, Another interesting video. Do you drill a hole at the end of any crack to stop the cracks spreading any further ,

@welderfabber 7 ай бұрын

We drill the ends of the crack if the crack goes right through the material mate

@AnthonyB17 7 ай бұрын

Amazing great episode once again baz nice to see you and fuxy get some recognition it's well deserved to the welderfabber team and fox group 👊💪

@welderfabber 7 ай бұрын

Glad you enjoyed it

@hornetboy3694 7 ай бұрын

Awesome video, thank you baz & The director & the team.great work.. the casting could be SG IRON .we use to make jcb casting out of SG iron .at lister/Petter iron foundry .

@cengizsoker1195 7 ай бұрын

Mr.Baz 👌. ☕. From Cyprus 👏 👋

@adrianshjadesheehan9991 7 ай бұрын

Brillant video Baz the director is like the stig in top gear your shows are getting better and better all the time Baz great content and simple to understand everything well done baz

@welderfabber 7 ай бұрын

Thanks Adrian

@PP-kf1jx 7 ай бұрын

Another fantastic vid Baz & Director the drone footage is awesome you really do go to town with the content, the Fox seems a really nice guy as well and very grounded, say safe Paul P

@welderfabber 7 ай бұрын

thanks paul

@rangie999 7 ай бұрын

A TRULY FABBER-ULOUS Episode Baz Team Director. there seems an element of carelessness with the excuses of 'some -' the drivers should take care of and PRIDE to be driving Dream Wagons!.

@teeslunk 7 ай бұрын

Morning Baz.

@richardlyons7582 7 ай бұрын

Baz how many miles do you do in a week? Great show thought, Baz a new must watch channel for me and that mid week episode was a gem, hope it saves you plenty of money so you can get some more toys to work with.

@mingthemerciless6855 7 ай бұрын

Baz you have a beautiful daughter and future Fabber! Like to see an episode with her laying down a bead. Cheers...

@pjaywils6073 7 ай бұрын

Love all the videos. Maybe cap off the hydraulic ports on the rotator before grinding and welding to stop shit getting into them ??

@catabaticanabatic3800 7 ай бұрын

A brave move to attempt a weld repair on that. Immense stresses on that component.I would condemn that connector (?) and fit a new one. Good luck though, keep up the good work.

@welderfabber 7 ай бұрын

We'll keep a eye on it, should be OK.

@randytravis3998 7 ай бұрын

Another great video .. when you pulled the cat walk with your truck the steps flexed // are they bolted on or welded ?? I thought they were going to pull off ..

@H20MPHTV 7 ай бұрын

Hey Baz, you can use a stainless rod to repair cast, I've used it to repair a cast exhaust manifold without an issue

@welderfabber 7 ай бұрын

Yes you can on an exhaust mate but not on that attachment, to risky.

@raygreene73 3 ай бұрын

Have you ever barred or refuse to supply plant to company due to constant abuse towards machinery, i remember picking up a mini digger missing a track the contractor used it for a month without the track to avoid a call out charge ,the end repair bill was alot more than a call out charge for a track remount 😂😂😂😂

@philiphuyton28 6 ай бұрын

lol sergeant major

@fredrickugarner8278 7 ай бұрын

Baz think about taking your work area that you have on your units that you and workers have you will have an all in one workstations start with one for each region. Do not cut back on the trucks you have for the men now you are a growing company.

@RichardArblaster 7 ай бұрын

38:27 is that the equivalent to Ashvilles "I don't know who did it Daniel" 😆😆😆

@welderfabber 7 ай бұрын

yes 100%

@mistery00t29 7 ай бұрын

When are we gonna see Fox in high vis and a helmet around the yard? 😂

@raymccarthy7492 6 ай бұрын

Where did ye get those chocks under the tipper body Baz ?

@allenbrown7820 7 ай бұрын

Great video! I do have a request. Could you explain how the metal separator works on a screener the next time you are working on one? Thanks. Keep up the good work and Be Safe!

@welderfabber 7 ай бұрын

Its an magnet behind the belt but yeah I will allen

@allenbrown7820 7 ай бұрын

Thank You. Always interested in how things work. I was an agricultural mechanic (John Deere)several years and then went to work at a paper mill making liner board for cardboard boxes. Like you say “ Every day is a school day “ and still learning. Always enjoyed the service calls because it was something different daily. Y’all be good and stay safe.

@paulusmarc 7 ай бұрын

Bon Boulo 👍👍

@user-co7ks7fl9j 3 ай бұрын

Did you do a. Video on making the dump truck rear body

@jayd1974 7 ай бұрын

Great video and informative as always lads👍What weight do you carry in your van3.5 ton?

@welderfabber 7 ай бұрын

4.7 jay 5 max

@tavspeed1101 4 ай бұрын

hastelloy you know the crack

@richmiller7834 7 ай бұрын

I'd be pushing all of your lads to be wearing as much protective gear as possible. Eye protection when drilling for a start, kneepads as much as possible and gloves, especially when using oil and chemicals. I'm not a great fan of Health and Safety and lucky too have survived the risks I took in my younger days, but the old days of not bothering are gone, or should be.

@kristianskov4841 7 ай бұрын

Story from my work-life; I was using a drill press, drilling 15mm holes in some stainless square tube. The shavings must have somehow caught my gloves, and pulled me into the chuck and wrapped my fingers the wrong way round... Lesson learned (the truly hard way😐)... Never wear gloves near turning spinning things!!!

@Saki630 5 ай бұрын

good long video, i forgot to sleep. We like the Director. lol is it his channel?

@jasonbrooker9595 7 ай бұрын

More of the fox

@scotspie501douglas7 7 ай бұрын

great work but fox group dont like drilling without eye protection basic stuff

@CR_C30R 6 ай бұрын

Hi baz hope your well ! Quick question what drill bits do you recommend using ?

@iosilver9920 5 ай бұрын

Depends what you are drilling but I use HSCO (cobalt content) drills, mostly Dormer. Don't be tempted by ebay comedy drills that are coated. Speed and pressure is a factor especially if working with harder metals.

@CR_C30R 5 ай бұрын

@@iosilver9920 cheers mate

@MargaretBehan-lg1yy 7 ай бұрын

Wat a muppet.al he does is work for them

@welderfabber 7 ай бұрын

Troll on to another channel 🤡

@manladuuu 7 ай бұрын

Any chance of a job baz I'm a fitter

@MR-DREW-N.I 7 ай бұрын

Brilliant videos as per usual baz and team! But on another note is Wayne Rooney your son? Spit off him 😂😂

@welderfabber 7 ай бұрын

haha how old do u think I am!!!

@MR-DREW-N.I 7 ай бұрын

@@welderfabberhaha beats me mate not even gonna guess lol. Keep up the great content, enjoying the show more and more the chronicles/episodes go on ❤

@matthewc.419 7 ай бұрын

@1.06.30 Could you have not put a block a wood under that foot thing on the steps .......be rite!!!

@iTeChFrESh 7 ай бұрын

Great vid, keep them up. One thing that is coming across in your vids is that your quite rude with your suppliers when they’re trying to explain things to camera. I know your very busy and a bish bash bosh kind of guy, but won’t hurt to give them a bit more time and your full attention. I know your a nice guy but just thought I’d mention 👍🏻

@welderfabber 7 ай бұрын

Thanks fine but what you dont see is my phone is none stop all day always a problem, we dont stop cause I'm filming, and I am very good friends with most of my suppliers even more so the 1s we put on cam.