Is The Off-Road 6x6 Finally Ready To Go?!

Рет қаралды 725,807

3 күн бұрын

So I Got To Work on The 6x6 Off-Road Rollback!
Download my FREE app at www.morrstuff.com
Subscribe / @mattsoffroadrecovery
Watch MORR Videos:
Oh No, Were My Measurements Wrong Off-Road 6x6's Frame!
• Oh No, Were My Measure...
Should This Be The 6x6 Off-Road Cab?!
• Should This Be The 6x6...
They Lied To You! Not An Off-Road Jeep...
• They Lied To You! Not ...
This Toyota Needs More Than A Rescue!
• This Toyota Needs More...
I Can't Believe I Wrecked The Off-Road 6x6!
• I Can’t Believe I Wrec...
This Rescue Got Too Dangerous!
• This Rescue Got Too Da...
No One In California Would Rescue This Jeep
• No One In California W...
I've NEVER Seen This BEFORE!
• I've NEVER Seen This B...
Need a cool Hat, T-shirt, or Rope:
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsoffroadrecovery.com/
Matt’s Straps, how we tie down our vehicles
mattsoffroadrecovery.com/coll...
Matt's Tools: Tool Burrito
mattsoffroadrecovery.com/prod...
Arcdroid CNC: arcdroidcnc.com/?aff=19
Check out the Miller Multimatic 220:
www.millerwelds.com/equipment...
Check out the Miller Arcstation:
www.millerwelds.com/accessori...
10% Off Discounts with our Friends: Use Promo Code MORR
Rock Slide Engineering
rockslideengineering.com
Barnes 4WD
www.barnes4wd.com
Yankum Ropes
yankum.com/
Rock Slide Engineering
rockslideengineering.com/
Flog Industries
flogindustries.com/
Yukon Gear & Axle
www.yukongear.com/
Full Throttle Battery
fullriverbattery.com/battery-...
Rugged Radio
www.ruggedradios.com:
Golen Engines: Use the code MORR for $200 off at golenengineservice.com
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Follow us on Facebook!
/ mattsoffroadrecovery
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!
This video contains a paid advertisement

Пікірлер: 1 900

@nickkline9874 Күн бұрын

I love that Matt thinks he’s just building stuff but really he’s teaching life lessons to all those kids.

@johnguilfoyle3073 Күн бұрын

No reason it can't be both. Building Something is one of life's greatest accomplishments. Seeing something you've built successfully recover someone will be another Life Lesson.

@patrickbass3542 Күн бұрын

There MUST BE a method to his madness because his life seems to be successful!

@AndreBelleque Күн бұрын

like the old high school shop class.

@Sjanzo Күн бұрын

Indeed hes just building stuff. Theres no sophisticated master plan, which is why his wrecker broke down so often. Nonetheless, these kids learn invaluable fabricating skills by getting the opportunity

@devinnelson5410 Күн бұрын

@patrickbass3542 he is just a salt of the earth best kind of person there is. Positive attitude, is everything prefect no but sees the best in things. I've met him and he is the same in real life as in the videos from my experience.

@Kevin-ti3rz Күн бұрын

Colby started out as a camera guy and now he is learning how to program a plasma cutter and help out here and there. He is another great part of the team ✓

@ericsmith3996 Күн бұрын

Yeah, i really hope he doesn't get churned-out like the others!

@samuelwurster2899 Күн бұрын

@@ericsmith3996hes fired

@nerfherder4284 Күн бұрын

@@ericsmith3996who got "churned" out? Seems like most left to start their own thing.

@bigredc222 Күн бұрын

@@ericsmith3996 If you are motivated, every job should just be a stepping stone to a better job, until you get to the perfect job you want to spend the rest of your life doing.

@PkwyDrive13 Күн бұрын

Which means he will probably quit and move on soon like everyone else... 😢

@17NatashaMiles 6 сағат бұрын

can't hate on Matt- the man has more drive than any race car!!! Building all these riggs (simultaneously more or less) and maintaining his actual business. I am so impressed by his "under a tree mechanic" mentality + produce such fine machinery. definitely excited to see SWEET CAROLINE in action next year. I know there is some entertaining footage to come.

@vinceess4181 Күн бұрын

The world needs more families like this. More dads like Matt. Chintzy KZfaq stuff or not, it’s still great to see. The awkwardness of the boys giving the trophy to Matt shows how real that actually really are. Now get back to work.

@stevebarcia5945 Күн бұрын

"Lubricate these gears with your tears" 🤣🤣🤣 classic. Get em Matt

@hjuugo Күн бұрын

some T-shirt material right here :)

@Iowaguy13 Күн бұрын

I'm 42 years old. I wish I could have been part of something like this. when I was Matt's kids' ages! They are very lucky!

@EthelJung-j5w Күн бұрын

Matt, I like how you answer questions in the Comment section. You give a basic understanding of why things are done. Thank you.

@pnwexplorer1122 Күн бұрын

this comment is from 1 hour ago, and has nearly 200 likes? Dang that's awesome

@JohnFL 21 сағат бұрын

@@pnwexplorer1122 Tends to happen with copy-paste bots, I wonder why..

@WesternBlazer 14 сағат бұрын

@@JohnFL I was just gonna comment and say they joined 28 hours ago and they already have 90 subscribes?

@freakazoid5907 Күн бұрын

I am not easily influenced by KZfaq videos but I have to admit I immediately purchased a Dewalt pressure washer with lots of power. I plan to mow my lawn with it.

@skylermummert24 Күн бұрын

😂😂

@Buck1954 Күн бұрын

That wins the funny comment award!

@TheRealTburt Күн бұрын

Nice.

@heyinway Күн бұрын

That is how you create line stripes and geometric designs...careful, don't create any nasty designs that would offend aliens.

@simpledj509chromo7 Күн бұрын

My buddy recently found an ad for a pressure washer for sale. It was a big commercial unit at 4500 psi or something crazy and the dude planned to strip paint off the siding of his house with it. The ad stated that he blew some of the siding off his house AND managed to land himself in the hospital after putting his hand in front of the nozzle. I thought it was funny. Some people should stick to hand tools.

@gazzafloss Күн бұрын

Matt's cornered the market on Corvair bits and pieces, and that's for sure. I've always said, "stuff always expands to fill the space available" your MORR yard is a prime example of that, oh, I'm just jealous!

@radioguybigd Күн бұрын

His goal is to own every Corvair on the planet! He hides them behind all the storage containers.

@backwoodstherapy Күн бұрын

"Temporary, but very permanent." Yeah, she knows how Matt rolls.

@darrinrebagliati5365 Күн бұрын

It's only temporarily permanent! It'll be changed when it breaks!!

@murymih Күн бұрын

A person who basically puts ideas directly into tangible products without drawings, schematics and can't really put the plan in paper is simply called a genius. That's what Matt is.

@SomebodysNephew Күн бұрын

"This thing can't even go over a curb at Wal-Mart. This one will be able to drive through Wal-Mart!" More excited and truer words have never been spoken by a man who is willing to drive through Wal-Mart.

@darekmistrz4364 Күн бұрын

Wallmart should make a drive-through just so that they can avoid unnecessary actions taken against their stores.

@simpledj509chromo7 Күн бұрын

As a truck driver I immediately thought of the times I've had to drive over a curb loaded because of tight streets or traffic and wrecked a $1000 steer tire. Curbs and loaded semis do not get along.

@rods907 Күн бұрын

I would pay money to see him drive through Walmart 😂😂🎯💯🎯💯👆

@Mark_Bridges Күн бұрын

Based on Matt's tyre sizes and diff ratios, the front will outpace the rear by only 0.82%. That assumes the front and rear tyre rolling diameters are exactly 42 and 35 inches which will vary all the time with pressure, load and wear. That's pretty close, probably closer than other off road vehicles with the same tyres and diffs and uneven tyre wear or load from front to back.

@martylawson1638 Күн бұрын

Yea, +- 1% is too small to even feel with knobby tires.

@Skwisgar2322 Күн бұрын

Yeah, the old Arctic Cat ATVs did a similar thing to have smaller front tires than rear.

@eddiegodat8263 Күн бұрын

And it only matters when in 4wd, which this will mainly be used in the sand in 4wd, and sand is very forgiving on offset gears.

@eddie8279 Күн бұрын

Matt's Tire size.....

@ottokiehl5413 Күн бұрын

"TYRES"? Obviously a Brit (although his calculations are probably correct)

@TaniaWoof Күн бұрын

Colby, I have never had any issues with your camera work. You do an excellent job. People need to understand that you don't use fancy inertia-less camera mounts. The fact that you can make such good recordings without that stuff shows just how good you are.

@mediocreman2 Күн бұрын

It's not the camera that's the problem. It's the in and out and side to side motions that are unnecessary.

@iffykidmn8170 Күн бұрын

@@mediocreman2 👍evidently others mistake it for being artsy.

@100DrWho Күн бұрын

Watching on my 24 inch monitor, I never go full screen or I'll get sea sick. But I'm old.

@user-do8cu8fe9d Күн бұрын

@@TaniaWoof no gimbles

@eekee6034 Күн бұрын

I generally have some motion sickness problems, but I've watched a bunch of Cody's work tonight and the only scene I got sick on was the one where he talked about those comments! 😂 Maybe I don't have it as bad as some, but if not, how do they manage KZfaq at all? Maybe I do have it bad, but I have techniques; squint, glance away, lock down my stomach for a moment. There's still plenty of channels I can't handle, but so far, I haven't seen anything to worry about in this one.

@larrydbarr4045 Күн бұрын

A reporter once asked the great Mickey Thompson, "What's it like to drive the Baja 1000?" Mickey's response, "Try to imagine an all-day plane crash" Many years ago, about 45 of 'em, I was wrenching in a shop that did nothing but air-cooled Volkswagens. K&N Filters brought their VW Thing Baja Pre-runner in for us to work on the engine. Surprised me that it wasn't as "caged" as I'd expected. So, I figure they used it more for route checking, than running at speed. Keep up the great work, Matt and crew. We love it. Kolby, you're doing fine with the camera.

@SeeUsFly Күн бұрын

For the younger generation . . . Good design is based on the K.I.S.S. principle = "Keep it Simple, Stupid" or "Keep it Simply Stupid", that is, make it uncomplicated, or to simplify things as much as possible, the acronym first used by Kelly Johnson, 1960, lead engineer at the Lockheed Skunk Works. My dad worked for this man.

@drewk448 10 сағат бұрын

Also the designer on the U-2 aircraft. I used to work on them and can confirm they were/are very simple aircraft.

@diegokleinman8774 Күн бұрын

You’ve got good kids because those kids have two great parents! Love everything you guys do

@davidboisvert617 Күн бұрын

Matt, (what about) sending the passenger door to Robby and have his new sheet metal fabricator straighten it out so you can keep the original door on the truck?

@MistValleyGaming Күн бұрын

^ This

@johnguilfoyle3073 Күн бұрын

It's good to see Max hanging around in the shop. We don't see him or Lady on the recoveries that much. Lady and Peanut came ambling through while they were measuring the cam. Peanut is the one with all the energy and into everything that gets on camera the most.

@Stempy Күн бұрын

Best part of Sunday morning. Peck Bros, MORR, and Tom Tom. It's like Saturday morning cartoons as a kid again. Cheers

@TheTulerie Күн бұрын

Robot Cantina is a good one too! He builds strange small cars & really gets into detail about how he does everything.

@waynemccuen8213 Күн бұрын

You are very astute in your observation that this channel is like a cartoon.

@TheFWAdmin Күн бұрын

The most important question of all is "Is there room for peanut in the truck?"

@bryduhbikeguy Күн бұрын

Where's the Cup and Pie holders??

@barrygunning4424 Күн бұрын

Jake has got to be the happiest dude ever. Alway has a smile on his face!

@maotisjan Күн бұрын

Matt used to be a demolition derby driver for years, he used up all of his anger and aggression than

@morganbeahan1944 Күн бұрын

“I’ve got good kids”... that’s a powerful statement. You have provided proper up-bringing and support and knowledge and dependence in your boys... I’m a young father myself.. ( 5 year old son and 2 little girls). Maybe different views on things but I can agree that bringing your children to church and getting God involved plays a huge role in the the future leaders of this world. Happy belated Fathers Day to the dads. And too all the dads reading this, God can help you no matter what.. we all need a good father to lead us. Love the videos Matt, your work does not go in-noticed

@caiolinnertel8777 Күн бұрын

My first thought when you were talking about "Why don't you...." is for you to say, "Why don't you shut up!" LOL. I'm an aeronautical engineer/pilot and really enjoy this. Can't do anything like this in aviation.

@Canopusparadise Күн бұрын

41:48 "You're going no where you're calling me and I've got to come get you out" Spoken like a Boss

@TheRealTburt Күн бұрын

Sounds like a guy with experience.

@datalorian Күн бұрын

15:34 "1) Its technique. 2) I have back problems" one of the funniest things Colby has ever said lmao. Colby your camera work is just fine, I think the commenter may have problems of the thing behind the eyeballs. :D

@billping2633 Күн бұрын

I used to own a towing company back in the 90s. I love this build you're doing. Thanks for explaining how you were going to route the cable over the bed. A fairlead will work great. This truck is going to be so cool when it is done.

@jeffm234 Күн бұрын

Panning to the 24:34 children at play sign was gold!

@peterhansen8216 Күн бұрын

Matt's whole family is very talented.

@BlackJeepConvertible Күн бұрын

Kaulin put his face too close to a scope 🤣 nothing to be ashamed of, we've all been there. I've seen Infantry vets with multiple tours still get bit by a scope once in awhile. It's so easy to forget because it only hurts for a day and then you forget about it a year later until you make the same mistake

@janblake9468 Күн бұрын

About 1974, , I was a pit crewman for Harley-Davidson Racing during a Baja 1000. Was stationed half way down (El Arco?). Used my 1972 Chevy Blazer. What a clusterf**k that was.

@thekentuckian0054 Күн бұрын

Probably inappropriate to ask but where I come from we still ask. Kaulin, what’s up with the shiner? Kicked by a horse? Or is it more like “you should see the other guy!”?

@gord7025 Күн бұрын

maybe the trophy fell on him

@AlWorth9738 Күн бұрын

Kaulin

@thekentuckian0054 Күн бұрын

@@AlWorth9738 fixed

@stephenmelton7706 Күн бұрын

Ask Rudy

@932511ajm Күн бұрын

looks like scope bite.

@aserta Күн бұрын

0:50 for sure box those. Whenever you have features that have thin proportions, but carry big loads on them, especially telegraphed like that, box it. Don't even think, just do it. Spray weld primer in, box it and forget about it.

@B4UClose Күн бұрын

Colby the cameraman expanding his knowledge and capabilities. It's great to see all the teaching and learning that all y'all are accomplishing.

@Babymyla-e9v Күн бұрын

I enjoy your videos very much, especially the family and friend interactions with no drama. You are doing good Matt.

@istvangellert5285 Күн бұрын

I can not wait to see this rollback on a rescue mission!!!! Looks amazing.

@elblancochingon8138 Күн бұрын

You mean "rollback" it is as of now only a tilt bed

@elblancochingon8138 Күн бұрын

You mean "rollback" it is as of now only a tilt bed.

@oscarfuentesjr8950 Күн бұрын

Matt's the reason why I got my motivation back and started working on my truck! I'm stoked he's running baja! I can't wait to see these videos!

@jeremyspecce 6 сағат бұрын

What are you working on?

@bgee461 Күн бұрын

Simplicity wins is wisdom that can be applied daily to everything. Food, clothes, work, hobbies. Thanks Matt

@YaBoyFry Күн бұрын

Can't wait to see the Baja corvair build. That's going to be sick!

@dalemullins4562 Күн бұрын

uhhhh Matt you should re adjust the diheadral on the radius of the Munson latch behind the fragistat ....gthoh with that! That drives me crazy . It's not your project, ITS MATT'S let him build it test it break it and fix it! That's why we're here, not to be keyboard supervisors lol🎉

@cynthiawallen4946 Күн бұрын

FACTS

@edwinschlee8374 Күн бұрын

Matts mind is like a roller coaster. Up and down with all kinds of twists and turns and fun to watch what is going to come next. I love this channel because of all that. Plus, he is teaching all these young people life skills!

@JeffCoplin Күн бұрын

I worked at Hendrickson truck suspension for 35 years & made many of those walking bean suspension. I really liked seeing this video of those. Thanks

@yeahitskimmel Күн бұрын

Lolol the crazy strong power washer bit got me

@2coolwheels139 Күн бұрын

That Corvair looks great with those wheels!

@Kevin-ti3rz Күн бұрын

I hope they keep them . The ring on them stands out and looks so cool .

@dzzope Күн бұрын

Maybe different colour on the spokes but gotta agree overall.

@socalcarculture Күн бұрын

I really like those wheels on that color Corvair!

@kimetherington2252 Күн бұрын

I'll tell you, Matt, your crew may be young and obviously not as knowledgeable as you, but they have a great teacher who has taught them well and will be able to see your visions soon enough! That gift you have of being a visionary has taught you well, and with Jamie, you two have brought up some very capable kids who can certainly hold their own in most situations! Keep on with the great content, and I'll catch you on the next. ✌️ 😊

@mikemorris4409 Күн бұрын

Matt, Using KZfaq logic, I have partially rebuilt a riding mower, so that makes me 100% youtube qualified to tell you, you are doing a great job. Ignore the armchair fabricators, you're good.

@billmcrae1424 Күн бұрын

Matt always surprises with his off the cuff references,,,Monet!

@Hoss5184 Күн бұрын

I mean honestly!! I don’t understand how people bring themselves to question Matt on anything on his builds!!!! He is the mutha fuckin YODA of building anything!!! Come on people save it. The man is a surgeon!! he has his doctrine in mechanics and fabrication!!

@wdwtx2.0 Күн бұрын

You do know that this is a family oriented channel, right?

@bigains Күн бұрын

@@wdwtx2.0 This is youtube mate.

@diyfferent Күн бұрын

I recommend not swearing in a comment, and especially not on a family-friendly channel.

@Ma_Deuce_338 Күн бұрын

That would be Paul.

@williamedward3198 Күн бұрын

Jeez man save some knob for his wife

@johnkriegshauser3277 Күн бұрын

I love it when you bring out one of the Corvairs. They bring back child hood memory's. We would travel and go camping in one. My parents, 6 kids, a large tent, and a picnic table. Dad was so mad when Ralph Nader hot them to stop making them.

@johnguilfoyle3073 Күн бұрын

Am I the only one who uses Straps when lowering something from under a vehicle? Just one or two cam buckle tie-down straps from frame rail to frame rail to ensure that nothing drops on you. The first time I had to lower a transmission from under a car without a transmission jack I learned to use straps to catch stuff from dropping too quickly. Whether it's a gas tank, axle, transmission, or those long plates under the rollback bed, it's good to have the added safety. One minute you're pulling and twisting to get it to break loose, and then it can drop suddenly. You can get in a bad spot hurt yourself or damage the part.

@JohnFL Күн бұрын

My dad tells a story about removing the trans from his '87 Camry. He was laying under it, intending to get the bolts loose and drop it down by himself, but he was not expecting how heavy it was and it squeezed the breath out of him. Thankfully, he was able to roll out from under it, but since then he's always had a jack handy when he's doing transmission work.

@jsk5287 Күн бұрын

“the straightening rod of justice”….. Spare the rod , spoil the axel!

@johntuttle5396 Күн бұрын

"THE BALLAD OF MATT, THE FABRICATING MAN: Oh, I'm going to lubricate my gears with your tears I'm going to torque down all your fears with my jeers A claw hammer is still a hammer Listen to me, I don't stammer! Every tool is also a hammer! I yam what I yam and that's all what I yam I'm Matt, the fabricating man!

@sidleggitt Күн бұрын

Thank you for your consistency. It helps me get through the week!

@MightaCoulda Күн бұрын

Matt! My wife in the past green lighted a 1968 C60 purchase and I feel foolish for not jumping on it. But life jumped in and I had to be a man about it. So I’m living vicariously through you haha. One of my goals is a 70 C60 burb down the road. I have the 70 burb but not the C60. Keep it up! I’m learning so much through your channel. You guys rock!

@baileytillman7144 Күн бұрын

Don't listen to them Colby. Your camera work is always on point.

@JavanVandeSlunt Күн бұрын

It’s funny I had never noticed the movement people must be complaining about until he said something. The style doesn’t bother me, but now I can’t “unsee” it, haha. Funny how that goes.

@jimyeats Күн бұрын

@@JavanVandeSlunt It’s smooth movement though, not jerky or twitchy. That makes all the difference.

@mediocreman2 Күн бұрын

Did you watch after he said that? There was tons of unnecessary movement back and forth and side to side. It is a bit sickening.

@baileytillman7144 Күн бұрын

@@mediocreman2 I can never understand people who complain about the quality of something they are receiving for free. If it makes you sick don't watch it, simple as that.

@JavanVandeSlunt Күн бұрын

@@jimyeats Yeah I don’t mind it at all. I never noticed until it was called out.

@ScottHammet Күн бұрын

"...I'm gonna lubricate these gears with your tears." That's pretty tall shop talk! Also very funny.

@williamturner664 Күн бұрын

Never noticed camera movement before Colby said anything. Some folk will complain just because. Think he doing good job and stepping up his knowledge. Good job him and Katelyn both. And of course the sons are above and beyond. Round it off with Jake and that a good crew. Young, motivated, willing to learn.

@xxBlazinBobxx Күн бұрын

Nice bonus length vid today! Thank you, MORR crew!

@BIOMAXABLE Күн бұрын

I look forward to every episode if it's a rescue or a shop work.

@anulfadventures Күн бұрын

"The Wolves have got to eat too!" Circle of Life!! Oh, and a Low Country Boil for lunch! Perfect!

@databeestje Күн бұрын

Add rollers to the bottom rear of the bed so it might not grind as much. Add plank hooks to the rear of the bed like you have on the trailer so you can extend the ramp and lower the angle, might be easier getting things on. Might even be able to bring a road car.

@jjansen987 Күн бұрын

Good for you. The Baja is a dream for most off-roaders. So cool you get to share it with us all.

@HillbillyHippie530 Күн бұрын

Matt’s Door job on the Spud Truck is looking good 🤣

@Buck1954 Күн бұрын

The dent in the door causes me not to look at anything else.

@bigredc222 Күн бұрын

@@Buck1954 Same for me, I was watching a video on Jay Leno's channel about a $300,000 dollar 1957 resto-mod, it's a beautiful car, but all I could see was that the body molding didn't line up perfectly across the door.

@davidflorcruz2908 Күн бұрын

That will get taken care of when it goes to Robby Layton’s for paint.

@sabarslax Күн бұрын

" So i'll use heat. Then i forgot i used break cleaner" 😂 if i had a son id like him to be like Rhett. Keep it up young dude. You rawk!

@cactustweeter2890 Күн бұрын

Colby you are doing a great job on video capture, and post production. Keep up the great job!

@billpogue3895 5 сағат бұрын

I'm loving how real your enthusiasm is!!!

@jeffomalley100 Күн бұрын

Shout out to Colby you're camera work is just fine lol.

@SPHYNX99752 Күн бұрын

Simply Functional! That sounds like a Value Added Benefit! You should name that 6X6 "Babe" after Paul Bunyan's Ox! His 🐃 was gigantic and blue and could pull a forest of trees on a sled! 🗿❤😂

@jdbrown3695 9 сағат бұрын

Love that in addition to building into the lives of your young crew, you are doing on your off time leading camps. I remember you doing that last year, also. It looked like the kids were having tons of fun & loved the T-shirt, Jamie! Great explanatory story line to share with your subscribers what you are doing, and why, Matt! This was a really great video!

@kevinthompson629 Күн бұрын

Good kids are a clear sign of good parents. You guys really are the best.

@paullittle4040 Күн бұрын

Blood, sweat and tears are the best lubricants for differentials. You nailed it Matt!😂

@carlsandvik2893 Күн бұрын

Great to see Stephen and Riley from ORD! Such cool people, great products and a plethora of knowledge!!!!!

@binkolney196 Күн бұрын

I have underestimated you Matt. I did not expect the Monet analogy. Well played.

@McTylerMoreTube Күн бұрын

Finally!!!! I’ve been wanting one of the KZfaqr channels I follow to race Baja for so long!

@JohnFL 18 сағат бұрын

You know Rudy raced it last year right?

@GAVACHO5150 Күн бұрын

Matt would make an excellent shop teacher in a school. Vocational whatever. Not that he'd want to pursue that but still. Right on Matt.

@ignaciomacias9464 Күн бұрын

Matt is the Bob Ross of Off Road Rescue!! We’ll Get Em Out 🇺🇸🫡

@blythkd9017 Күн бұрын

Really enjoying watching the build. Can't wait til it's finished.

@NickBeek 6 сағат бұрын

I'm really happy that Matt is taking the time to explain his thoughts to us in more detail. Thank you, it's easier to see your vision when you explain to us, plus I learned a few thing over the last couple videos. 😎

@jeffomalley100 Күн бұрын

As a mechanic from my old country of Ireland where i specialized in spud trucks for many year's I can't even lie this one is pretty sweet.

@maotisjan Күн бұрын

Working vehicles (the ones that help with or are used for work) are the most noble of them all

@explor360 Күн бұрын

“Lubricate the gears with your tears!” You owe me a new keyboard and a coffee…

@ldvan100 Күн бұрын

Another reason for the "rocker" in a tandem suspension is to keep weight on the axle that has dropped off on an uneven surface.. Without the "rocker" the axle carrying the weight will have traction but the axle that has dropped off will have limited or no traction.. The "rocker" has its benefits...

@LawrenceTolman Күн бұрын

So awesome to see it on its wheels and tires! Awesome build so far

@krisnewman3202 Күн бұрын

I’ll be looking forward to your Baja run. I used to work for Vic Hickey in Ventura, CA who built the Baja Boot back in the late 60’s and the Banshee for James Garner. My first race working pit crew with Vic was the Mint 400 circa 1970.

@markblanchard4826 Күн бұрын

Congrats Matt on best Dad of the year! You could call your Corvair a FloorAir or MorAir with those holes in the floor... LOL

@ericlangston481 Күн бұрын

Can’t wait to see the Baja corvair build! 😊

@bryduhbikeguy Күн бұрын

You can tell Matt dun gradjiated the 5th grade cause he knows words like "Monet",(Not the stuff you spend). Plus he can walk and chew pie at the same time.Unlike many keyboard mechanics, he thinks things through several times Before he talks about them,and puts it on paper. Keep up the 'Okay work" Matt.

@Lescqe3uj Күн бұрын

Gotta love Matt’s phonics, in sand you are DUN. Period

@sparkyofsocal Күн бұрын

So glad to hear the first race is 2025 and not a rush 2024 attempt.

@blountscreek 21 сағат бұрын

Matt is always teaching as he goes through everything he’s working on. Love watching these videos!

@BlackJeepConvertible Күн бұрын

build storage in between the frame rails. There's so much ground clearance you'll be able to duck walk to access it.

@mkrause45 Күн бұрын

Matt is trying to push stealing the wheels off of him on to Jamie 🤣

@DOC3ID Күн бұрын

Aloha and good morning from Hawaii!!

@ErnieMathews Күн бұрын

You folks do nice work, usually well thought out, but always pretty: clean welds, lovely corners and gussets. Seeing stuff broke in Baja you guys don't break.

@SadPuppySoup Күн бұрын

"Not ready for a recovery but ready for Sema"

@Rueb2320 Күн бұрын

In the right conditions the spud truck might be able to do some cool wheelies!

@Kevin-ti3rz Күн бұрын

Love the rims . They have the look of a beauty rings of older wheels

@davidb8001 Күн бұрын

Dear Matt, I lived in Spain for 10 years and everything I saw was made in a very simple way, it works really well, as you said it was also very simple to repair if it went wrong, Love you guys and what you all do, Thanks for all the brilliant, interesting videos.