I enjoy watching the struggles and repeats on new lines, as well as the "failed" lines.

I love driving the 6. Man I would to get out there and hit some trails with you Logan!!!!🤘🤘🤘

Man you have the coolest place in the country for crawlin. Be safe friend

Would love to see what would happen if the 6 scale Capra came to be. You gotta be telling your Axial reps we NEED it!

Such a heavy rig to hold that sideways line that was a nice craw through that crack too bad it needed assistance to start. Here we are almost at the end of year, I wish they would come out with more bodies for the six

I took my scx6 Jeep and Scx6 honcho to sand hollow. Crawled the area where you can jump of the rock cliff in the summer. Had a blast. Ran into through the lake water down below, as well. Both are upgraded. My Honcho climbs great with the 3bros foam and stock wheels, upgraded steering servo, high clearance links. Both of my Scx6 have been bulletproof so far. After shimming the diffs. I took your advice and picked up one of the last bombers 2.0. My bomber build ended up costing more than my scx6 lol. I enjoy watching your videos and enjoying my bomber build. Someday, I’m going to make a youtube channel. I have some great footage of sand hollow and 3 peaks. Also, working on my base camp build. Rock pirate sliders and shock mounts with a cliffhanger body. I live in so cal. But, own a house in Enoch. And visit there often. Also, prayers sent to the Haight family. Such a sad deal. Hope to see you out on the rocks someday. One last thing. Not a transplant lol. Born in Sandy Ut. I really enjoy your videos. 🤙

Great BIg Crawler! The Spot is Awesome!

Nice job man!!! Mines a bouncer now but I kinda miss having a Legit SCX6 LOL

Love my SCX6. In addition to more steering power, I added aluminum C-Hubs and bearing carriers up front to eliminate the flex in the stock set up, 25% overdrive gearing in the front diff, shock towers and both Steady Foams and 3BRC anti-foams. The Steady Foams fill out the stock and Proline Hyrax a bit better which is great for those sidewall climbs. The anti-foams do grab the small edges/ledges just a smidge better but cost twice as much as the steady foams. If you play in wet environments a lot...the 3BRC are probably the way to go. I also added a 10amp BEC for the stock and replacement steering servo which gives me all the steering I need without spending a fortune on a servo. Thanks for starting the New Year off right!

I just got a Honcho back around Thanksgiving. So far, Injora aluminum beadlock wheels, Injora aluminum axle housings, Injora dual stage tire foams, Treal trans servo and steering servo mounts, Treal front shock towers for a stiffer panhard arm mount, Simmex titanium high clearance link set including steering links, and Shift X5 servo. Gonna do all the work tonight actually. But the wheels, foams, and links made a big difference alone.

Excellent driving as always, love the scx6 on the rocks and what an awesome trail.

Hi Logon another Great video buddy. Logon I want to say THANKYOU. I won the HIGHNOON HOBBYS end of year comp. Logon it was yourself who introduced me to Alec at HIGHNOON. Another great Chanel so thanks for the intro 🇬🇧🇺🇲🕊️✌🏼🤟🏼

The nice part about this truck is you can put it in back of your vehicle if it fails. A real Crawler you call the recovery service!

Sick line at the end. Recommend Anti-foams, and spectrum parallel battery connection gives way longer run time.

Love your content the last line was insane

Nice crawling 💪😎

epic location, nice lines

That last climb was awesome!!!!!!!

I did the clipless body system and haven’t taken it back out. I’m going with the NSDRC servo when it warms up and 3bros antifoams with hyrax probably. Awesome driving 👍

Who would have thought doing crack could be so fun without all of the danger's! Nice crawl with one of the big boys.

Great Truck if you like crawling you need to get this rig well worth it👍🏼👍🏼👍🏼

Great crawling action and amazing car control at 6:25! 👍😀 Thanks for sharing!

Too cool man, love seeing the Honcho hitting up those lines!

My Honcho has bed delete, interior delete, Powerhobby 1513MG steering servo, hyrax tires w/proline 2 stage foam, injora 2.9 wheels, Samix front towers, orange front. rear purple springs. treal diff covers, aluminum c hubs.

I'm just getting into the crawling machines on the ground as I did alot of scale flying with my rc helicopters and planes however I got the capra 4ws with light mods brass and so fourth also just got the red honcho scx6 and ordered all metal components for everything but axles for now. My daughter and son n law love to get out with there crawlers so I wanted to join them to spend time with them but they may have created a monster :) .

Great crawling as always

Thanks Logan! Awesome content as always!

Sick line man love it

The only thing I've done to my Honcho so far is a NSDRC 2500 servo. Hoping more tire options come out.

We are heading to sand hollow for Presidents Day and were bringing some 1/10 rcs

Love it

The main gripe I have with my SCX6 Honcho: My 1/10 scale rigs collect dust!

I have both the honcho and the jeep. RS2500 v1 in the honcho and rs2500 v2 in the jeep. They are insane good, direct power to 4s. Upgrades are shock towers, tire foams, servo and servo mount and metal c hubs and knuckles.

I’ve been fiddling around with my homemade foams on my 6 honcho, I think is pretty fun see if traction gets better. I run my original steering servo on a separate 2S battery pack which makes a bigg difference, I did new graphics just for the looks. Great drivin✌🏼

I know the Capra is more of a competition truck but I hope they put some lights on the 6th scale Capra, you know it’s coming, just a matter of time

Love the Scx6 I’m with you on the downsides....it’s heavy and no one has one lol. Want some flat rails for these beasts!!

Definitely got some skill crawling man your rc videos are one of the phew that are entertaining to watch for sure ps congrats you are my first ever KZfaq comment and I’ve been watching KZfaq for at least 14 years never commented before i know what you do is fun but still not easy great job and congrats on your first kid

I’d love to see some one make an lcg scx6 there’s not many after market parts to my knowledge so it would have to be a custom job for sure

I got a honcho and the best thing was a steering servo and treal shock towers

Very nice run and video. Got my bucks saved up for the big 6 Honcho but I'm gonna be disciplined and at least hold out until spring for that big Capra. C'mon Axial!

Please check out NSDRC RS2500V2. Just look at the specification differences.

I like the Jeep better for sure

Wondering how that truck will be with 4ws 🤪🤠 Capra style scx6 and 4ws would be awesome 🤪🤪🤪 and some crazy light kit on it😅😅

🤘🏼🤘🏼🤘🏼

Did I hear correctly you no longer have the Gladiator? Damn shame. Your crawling style and commentary along with the Gladiator are still my all-time favorite videos. Here I was waiting for more Gladiator content. Bummer.

Have you thought about cutting the swampers upfront to create more leading edges?

I like your slow crawling style. Good for videos. But I like 2nd gear n getting a little heat in tires. I feel its more life like

I want one of those, but a $300 steering servo plus the shift servo make an already high entry price even higher.. plus wheels, tires, etc... and it's so big I'm not sure where to store it. Plus I've started getting into RC airplanes. I need a bigger trailer. Sigh.

It'd be nice if some other companies would come out with big crawlers but cheaper

I love your new hoodie man ide like pic one up haha some get $$$$$😊

How did you get your smart battery meter to work on your controller I have a smart battery in my bomber and it doesn’t work

Where's SID? You must a big man to push it in place!

Foams that comes with the super swampers better as the original?

what if you took a traxxas rc car on the bobsled rd? just wondering love your videos.

Question, I actually really like simplicity of the DX3 and want to pick one up for my TF2. I don’t know the first thing about RC electronics aside from what does what. Would I be able to use the DX3 to the stock Outcry III ESC on the TF2?

Cut top off of Jeep a lot of weight off top👌🏻👍🏼👍🏼

Want a scx6 honcho