That body woke it up Logan, nice!👍 I just added a Losi Hammer Rey body to mine and the new Hobbywing Axe r3 combo running on 3s. I've never seen a vehicle move so slowly and it saves a ton of weight too.

I absolutely did not want a SIX till now!!! That truck is amazing it looks like it’s little brother the TEN. And the capabilities that it shows in the video speak for itself…

Thanks for including the install at the beginning. Nice addition. 👍✌️

The swampers outclimb my hyrax every day of the week. Love that body and need to order one so it can be on backorder with everyone else;-)

Cool! I want a 1/6 Capra. Maybe then I could justify the cost. But, always loved the large scale and would like to pick a used one up down the road.

Another great video. I enjoy the fact that you talk thru each obstacle that is key.

Very cool conversion! The scx6 performs awesome like it was made for the job 😊 I’m in the midst of installing a hammer rey body to my scx6 …NSDRC 2500 servo , dual foams and some cheap aluminum wheels….about 80% finished…can’t wait to get it on some hills!

While I'm not generally a fan of the Cliffhanger body on an SCX6, it's hard to ignore the performance gains. Great build and even better driving. Love the video and commentary, Logan!

that's a hack of a rig, you guys have spots we can dream of here in germany. class 1 vid 👍

fanstastic, im getting a SCX6 soon too, I have a custom 1/6 truck/SUV body waiting for it. CANT WAIT TI GO TRAILING with this!!!

Oddly enough i just finished and tested my scx6 out earlier today and here's this video!

We definitely should. I have twice now in the last year.

I guess I’ll be buying a scx6 now😅 awesome vid man!

Great to see a big rig man! Thanks

I pick up and scx6 cheap, i cut the roof off and did a few upgrades, i really like driving it, i don't have the terrain you have, just dirt trails and hills, but its a different driving experiance

Amazing videography. That paint scheme is killer!!

The 6 is killer! I would love to have one, but I don’t have the terrain to justify the cost to buy and build one. Would love to see more content on it though. Both more driving and any more upgrades you have planned. Cool video!

Man that truck is awesome now!!! Very impressive!!! I've been working on a custom bulid. Have always wanted a CJ style jeep! Have run into some problems with the panhard steering and frame shift! Custom painted a injora hard body. It has an interior. Had to put it aside because it won't sit down on the chassis! I love what you've do your scx6.

Reefs...Schmeefs....in the end of the day its a AGFrc servo 😎 Rad driving though....love that place you are at 🤩

The bar work is awesome! Definitely makes me want to put mine on the bench & drop some weight also. Rad wheelin dude 🤘

Missed the live but what a great showing of the scx6. Excellent content as always.

That thing is awesome.

Well, I got one after watching many of your videos. Got it used and it came with lots of stuff you did to this one. I just need a different body now.

Really like my Vitavon straight axles .

What killer rig!!!! I love my 6, I have the Jeep as well with the top off, which made big difference. As far as other mods it has 3BRC Anti-Foams, Vitivon, front and rear shock towers, and Fine Lazer clipless mounting system. I did buy the Cliffhanger body which is still in the bag, i think you have motivated me to mount it up!!!!🤘🤘🤘

I just modified the included servo horn drilling it and tapping it for M4 threads. Its pretty easy on aluminum.

23:46! Thats what it is all about!

Not in the same league but I've just put sl super swamper xl on my bomber, not had a chance to get out on the rocks, but just driving it about it's already way better than both the stock tyres and the ottsix usd stickies.that was a sick run Logan!

very nice rig and setup... wish i was liquid enough to get one. next year will see

I love the genuine disbelief on these lines man. I have a pretty heavily modified redcat gen 7 on capra axles. And it still surprises me sometimes.

I loved that run!! I run carpras with simple,brass, 2in1 motor, & like to crawl in your area!! I'm in total south San Diego ca, & got washouts,.brem rock!! We make it work!! You totally may sold me ,on this Xmas present 2me!! Happy holidays!!!

Dig it man😋 very sweet ax6🤙. I must have one😉💪.

After seeing all the crazy builds at PLBTF I want one of these bad haha. The lines you guys have out there are wild!

Love my six yours is awesome looking nice run 🔥🔥🔥😎👍

That was some sick lines you run with the 6 & your other trucks, I do like your driving style, great work 👍. I love my 6 & I do enjoy driving it, its got the Vitavon stright axels, links, aluminum panhard mounts, Power Hobby aluminum front & rear bumpers & Vitavon wheels with stock tires, looking into the NSDRC servo for it

Frckn awesome!!!!

Man great video! That last climb was insane to watch, I couldn’t imagine what it was like to drive. Definitely would have broken something if you kept going! Thanks for the video

I've got the JLU and seeing the change in performance really makes me want to put this on my list. I was pricing out converting to a Honcho body and oh boy thats too much for a body, I think $300-$350. Thanks for the great video!

I went for Vitavon aluminum chubs and knuckles. The knuckles have oversized bearings included. I have the Club 5 Racing stainless steel front, diffs and center skid plates so the last thing I need is THAT MUCH more extra weight on the front. I also use a separate battery source for the Beast 2000 (3S 800 mah 50C Spektrum). I actually have 4 batteries in my Honcho Pro. Two main and two backups. The servo batteries are located on a LEXAN shelf right behind the front bumper. I believe my Honcho (with a Cliffhanger body!) has an 80/20% split front/rear. And my Honcho is at it’s lowest (collars all the way up). AND…if your rig doesn’t have an front overdrive gear set yet then it isn’t finished. I didn’t hear you mention that. It’ll make a HUGE difference. You’ll sh*t in your shorts at the now amazing performance. And try outboarding your shocks. Even more stability. Especially sidehilling. I’m trying Hyrax XLs for a performance upgrade. And Steady Foams. I also have brass hex drives and diff covers. Stability on the center and ends of the axles. We diehard RCers will turn the RC rig that was replicating the real thing eventually into an actual RC crawler…only bigger. HonchoMacarra is too a beast

Look into the Bowhouse carbon fiber slipper clutch. Awesome build and run so far!

Love it.😎👍

There's no doubt that thing has real stepped its game up with those few minor changes. Just imagine how badass it would be if it had rear steer👍

Badassary! I’ve got a 6 modded up. Not quite like that?! Great video!!

I got the Treal axles and they are beefy. Added good weight low but only downside is they don’t slide over rocks like the plastics do

Vitavon portals give almost an extra 3/4" clearance for $800 price tag.

insane. just awesome.

Sickest line compilation video you’ve done, hands down. And yea, an SCX6 is in my future Thanks mother funker

Yes it does now I’ve always wanted the jeep with the top cut off and the fenders removed so it has more of a wide Dana 60 look on a jk. But this I wanted that body but the honcho one to graft the interior into and have the cool A-pillar lights it comes with. I just wish axial on all their rtr would skinny up their tires a bit. Sometimes the rears of this and the others have cartoony look with a narrow axle in certain shots, not complaining. Also absolutely love the patterns on the roof and rear bed center. The black wheels are nice against the pinch body and I would personally paint the diff covers black.

Its pretty sick. Any more plans for it next?

I did a jcd carbon comp chassis vitavion Portal axles servo on axle vitavion high clearance links with the cliffhanger body with vitavion over drive gears

Im really having a hard time not buying one now after this vid. I've been holding out for a Capra -6 but this rig performed well.

Very cool. What bumpers and nerf bars you using?

yes i def need one

awesome, but locking diffs would be necessary on the scx6 i think

Ok im gonna want 1....

Amazing Amazing amazing amazing Amazing Amazing amazing amazing Amazing Amazing amazing amazing Amazing Amazing amazing amazing

Now that’s more like it! Honestly the jeep was a little underwhelming. Almost like when you buy a stock RTR. But this is awesome!

Awsome as usual! What did you use for body mounts?

If it wasn’t 1000$ to start lol but Dang I want one …

Awesome.

What size battery’s are you using ? Is that stock motor and esc?

Can't you just drill and tap the existing 3mm with a 3.3mm drill and tap with 4mm tap instead of buying 4mm servo horn? I know not all RC folks have a tap set..... but the price of the tap is probably comparable or less than the servo horn and it will come in handy in the future. Great video and content!

🎉🎉🎉

Can you provide a link for those bumpers? Tia

Did you just add that servo and connected the battery to it and good to go ? Or did you have to update the bec or something like that? Please answer I’m in the market for a new servo for the scx6 thanks

What are the bumpers you have on it? Would really like a set for mine.

Welp, I want one.

I've been working really hard to not get started" crawling " my scx10iii and just build a crawler , don't want to trash my early bronco body any faster than needed...

What was that? Like a 80 grit sandpaper down the right side on that crevice?

Supershafty has a scx6 class and the cliffhanger is outlawed but the roof can be trimmed off the 6 what do you think that or the proline C10 body to bring the weight down lower

Anymore MOA content coming out soon?

$450 for a servo... exactly why I haven't gotten an SCX6 yet.

Big dog servos do not like plastic parts ask me how I know... Lol 😂😂😂

DO REAR STEER

The anxiety at 27 minutes in. Just stop!!