Aztech Apache Part 2 Testing Tappetless Cylinder Head

Рет қаралды 3,093

Күн бұрын

Join this channel to get access to perks and Discounts on our website:
/ @therealdealairsoft
In this video we are conducting a test on the Tappetless Cylinder head the "Apcahe" from Aztech Innovations.
www.therealdealairsoft.com
** Product tech tip, the unit does NOT release air immediately, the seal is held until the nozzle contacts the bucking, as the nozzle stops at the bucking, it breaks the seal inside the cylinder head for a momentary pulse, releasing air as the nozzle is touching the bucking **

Пікірлер: 25

@massarms4583 5 сағат бұрын

No need to reinvent the wheel. TM baby!🤣

@anthonyseverino8292 6 ай бұрын

This is great testing

@Terminatorbart 6 ай бұрын

Nice FPS grouping!

@GetRealWithAsh1111 6 ай бұрын

Great info Thankyou ! 💚

@jovannyfeliciano6604 6 ай бұрын

Everything needs that magic touch from the real deal in order to work

@austinwirth3932 6 ай бұрын

You should drop a complete v2 gearbox using your and other good parts on your site

@jaysyoutube354 6 ай бұрын

real deal stuff never has problems

@Noob.Gaming 6 ай бұрын

I'm using a 260mm EdGi 6.01 inner barrel with a 6mm Custom Sorbopad and I'm concerned about over or under voluming if I switch to your DSG Bundle Kit V2. Also, What spring would you recommend achieving 1.5j with that setup?

@SS_Luke 6 ай бұрын

Wassup Jake, I just want to say you are the main guy I've been listening to when it comes to building an aeg and I'm finally going to start building up one for myself. Planning on building a 13:1 ssg, gate titan,30k motor, and use your 5.0 compression set on my Zion arms r15 sbr. Just wondering what problems should people expect when they say to plan on opening up your gun when you build a dsg? Edit: also, is it worth it going brushless?

@realdealairsoft1867 6 ай бұрын

hey brother thanks for the comment, when opening a gearbox theres literally no problems to expect because your going to be replacing everything lol. a 13:1 build and a DSG build I go about it the same, in terms of order of operations. meaning remove everything and start with bonding new bushings or bearings. on a high performance SSG or a DSG you need to support the gears and stock bearings always blow and stock bushings are too thick. I came out with low profile bushings and bearings. Thats number 1 for a dsg you should have a premium gearbox shell like retro. if not you NEED to radius your gearbox same for SSG. If you go brushless then go with T238 and do not chase a stupid RPM , stick with either 33 or 39k. i wish you grabbed my golden boi 29k motor over that 30K , our motor has virtually the same rpm as asg 30k but 2 more TPA. more torque and effieicnt but regardless you have a great set up. I would also upgrade for your build, Real Deal Bearings or bushings, Nozzle hop chamber and bucking, bruhsless does bring a world of other problems but is am amazing product. Brushless you NEED TO THREAD LOCK THE PINION AND SHIM PERFECTLY. IT IS NOT FORGIVING. ALSO TURN OFF AB OR ENABLE BRUSHLESS MOTOR MODE ON MOSFET. If you dont have areal deal motor it will probably get warm or hot on you. Brushless for SSG is great . Brushless for DSG is a whole nother world of advanced technician experience. It is not easy to do and requires so much experience. For a dsg Real Deal Brushed Motors for the win you have a rotary hop chamber, you can keep it stock, but upgrade bucking to MR hop 70 degree and a maple leaf omega hop tensioner. Not sure your nozzle length, but odds are its a shit nozzle, stock chambers are usually 21.4 mm which we also carry a real deal 21.4 nozzle as well as a POM 21.1mm nozzle , I am not sure what length you rnozzle is but i would assume 21.4mm

@drewmurray6480 6 ай бұрын

It looks like their new version of apache and they make the fps drop like 10 to 15 percent for some reason and the gold aztech innovations adjustable trigger

@CROWAIRSOFTNI 6 ай бұрын

very interesting piece of kit dude appreciate the vid, ive recently had an aeg build im hoping to try out and this would be perfect, also where Do you play

@TheRealDealAirsoft 6 ай бұрын

I play all over America now based in CT

@CROWAIRSOFTNI 6 ай бұрын

the dream is to venture over to the states to play, all the way from northern ireland, much love for the response i love this concept look forward to seeing what way you sus it out

@djdynorgen9249 5 ай бұрын

Aztech seems to not be working with airsoft. I thinks its got to do with air sealing. In the Gel Blaster world (Australia), Apaches work great albeit tricky to set up. But our nozzle has rubber over it and o-rings to adjust nozzle to T-piece contact (we have no hop unit/bucking).

@AzraelsArmoury 4 ай бұрын

The new one heading out to testers all around the world tomorrow which will fix that issue.

@batzarrosdefijourney6970 6 ай бұрын

posssible the nozzle is to long pushign the bb to far into the bucking before the air hits bb

@drewmurray6480 6 ай бұрын

Heaps better now

@paulb2948 6 ай бұрын

I had the first Gen and it was too much of a PITA to even make work if at all.....💩

@dilemaz85 5 ай бұрын

If anyone wants a brain teaser...check out the latest thing aztech are developing.....

@AzraelsArmoury 5 ай бұрын

Its something special!

@asianairsoft 6 ай бұрын

That stuff is crap

@AzraelsArmoury 5 ай бұрын

Yes we aren't moving forward with this design. We have a new design we are sending to realdeal to test which should be much better!

@tipzy7730 6 ай бұрын

curious as to how hard the noz punches out on this one. the original versions noz had so much force behind it, it bent the bridge of the hop window on one of my ML barrels. and was kinda scared to put m;y finger in front of it. this one having noway of controlling how far the noz goes scares me this could be worse on this one and stainless barrels are mandatory. imagine putting a brass EDGI barrel in your gun with this slammings its 7075 nozzle into it with the force of the main spring.

@OhYeahMedia 6 ай бұрын

mans got a point