Рет қаралды 17,701
STL, 3D print model - fab365.net/ite...
Support me. / goodesign
Body color filament - ZIRO Dark grey PLA
This is the B-2 Spirit stealth bomber you've been waiting for for a long time.
Because the plane is so big, we scaled it down to 1:100. Nonetheless, it is quite large in size.
Those of you who have a large printer should try making 1:72 scale prints that match the size of the airplanes I have made previously.
Numerous details were depicted to suit the size. Therefore, the number of parts is large. But it is very easy to assemble and build.
Because there are a lot of parts, there are some caveats.
1. The main body has supports in several places. Please check carefully and remove these supports first.
2. Be sure to check the positions of the white lines in advance before attaching them.
3. When attaching the rudder plab located at the end of the wing to the wing, be careful not to attach the hinge to the wing.
4. When connecting the wings to the main body, please check the left and right sides carefully.
5. The size of the wing flaps is slightly different, so please check the photos and videos before connecting.
Please check the video for detailed assembly process and details.
With this, three representative stealth aircraft types were completed.
We hope this B-2 bomber completes the series of stealth airplanes designed by GOODesign.
1 : 100 scale
Largest part in printing, size= X 170mm, Y 166mm, Z 105mm, After full assembly size= X 200mm, Y 520mm, Z 54mm
Total Build Time : 4d 1h 15m / Plastic Weight : 318g