B8/B8.5 AUDI A4 CTS TURBO INTERCOOLER INSTALL | WALK THROUGH

B8/B8.5 AUDI A4 CTS TURBO INTERCOOLER INSTALL | WALK THROUGH | TUTORIAL

Рет қаралды 15,772

Күн бұрын

THIS WALK THROUGH IS DEDICATED TO CTS TURBO (NOT PAID PROMOTION) AND INSTALL THERE FRONT MOUNT INTERCOOLER ONTO YOUR B8/B8.5 AUDI A4.
THANKS FOR WATCHING AND PLEASE LEAVE A COMMENT DOWN BELOW AND LET ME KNOW IF THIS VIDEO ANSWERED ALL YOUR QUESTION AND HELPED YOU TO INSTALL YOUR FMIC
SHOP RWDYAUDI.COM
rwdyaudi.com/
🔹
FOR APPAREL, STICKER, AND THE CHEAPEST MOD TO SUPPORT YOUR VW/AUDI
🔹
SIGN UP FOR NOTIFICATIONS TO GET ALL THE LATEST PRODUCT UPDATES
🔹
LOCAL AND LOOKING FOR SERVICE ON YOUR VOLKSWAGON OR AUDI
CONTACT ME
@SPRINDUSTRIES ON FACEBOOK TO SCEDULE AN APPOINTMENT
🔹
🔹
FOLLOW ME
@RWDYAUDI ON INSTAGRAM / TWITTER / FACEBOOK / TIKTOK
@JACANTHONY KIM ON FACEBOOK
🔹
|MUSIC|
MIXMASTER DYLAN
/ @djrpro6501
🔹
THANKS FOR WATCHING
🔹

Пікірлер: 82

@TheRwdyAudi 3 жыл бұрын

IF YOU LIKE THIS UPLOAD MAKE SURE TO CHECK OUT THIS PLAYLIST FOR MORE MAINTANCE AND MODIFCATION TO YOUR B8/B8.5 AUDI A4 20.T kzfaq.info/sun/PLGEOWoqEbTqyAQF9-eEtj9wyXyHAQRwdm

@gnarshread 3 жыл бұрын

Your instructional videos are getting a lot better!

@TheRwdyAudi 3 жыл бұрын

Thanks my dude👊😎

@dannyvk5867 2 жыл бұрын

you have no idea how helpful this was

@TheRwdyAudi 2 жыл бұрын

Your very welcome

@jaydenlee2186 2 жыл бұрын

Hey man, thanks for this video! I just installed my intercooler so I can go stage 2 and this video helped make it super easy. My car is a b8.5 so some things were slightly different but nothing major. Thanks again!

@TheRwdyAudi 2 жыл бұрын

Your welcome my friend 👊😎

@darkproductions6316 3 жыл бұрын

I got this kit two week ago and installed it 3 days later took me about 2 hours because there were no instructions nor a video on this specific kit and it’s honestly really easy to instal the only hard part was the pipe leading from the front fright side of the intercooler up to the throttle body because I had to remove the headlight and the reservoir and lift up the headlight housing but that’s because I was trying to be super careful but I got it and it was easy. VERY GOOD QUALITY

@TheRwdyAudi 3 жыл бұрын

I had similar issue with it I just moved the coolant reservoir, I didn't even think about moving the head good idea.

@titomo7150 2 жыл бұрын

Great video! Helped me a good bit on installing my CTS kit. I believe I had a slightly different kit than you. My Intercooler tabs were welded in the right configuration ha 👍🏼

@TheRwdyAudi 2 жыл бұрын

👊😎

@titomo7150 2 жыл бұрын

Almost forgot, my MAP sensor hole was actually sized correctly, hence no inclusion of the black o ring in the hardware bag 👍🏼

@johnthiccc4584 3 жыл бұрын

Great vid! Is this and a down pipe all you need for stage 2?

@TheRwdyAudi 3 жыл бұрын

U should have an cold air intake and ideally a some sort of catch can system before u go stage 2 .... also personally I would have valve cleaning service done just to C.Y.A.

@taylorpetrone139 Жыл бұрын

What are your thoughts on the performance of this intercooler, what are your IATs vs ambient, and how’s heat soak after 30 minutes of hard driving?

@Ayomeloo 3 жыл бұрын

any chance you’d be able to to a timing chain tensioner video? heard these go bad on b8s and an updated video would be nice :)

@TheRwdyAudi 3 жыл бұрын

I can definitely do one. Great idea 💡 👍

@jacksonadams5332 Жыл бұрын

Did you have to bend the a/c line out of the way to get the charge pipe on the right side of the intercooler?

@TheRwdyAudi Жыл бұрын

yeah i had to give alittle tweak nothing to crazy.

@blizteredthumbs7911 2 жыл бұрын

Good job. Where's the tune video

@grantbradley5084 3 жыл бұрын

I was lazy and paid someone to install my CTS intercooler on my A4. Great video though.

@TheRwdyAudi 3 жыл бұрын

Thank you

@michaelroizes4252 2 жыл бұрын

How much did it cost?

@TheRwdyAudi 2 жыл бұрын

I wanna say it was around 600 ish

@RealGX 3 жыл бұрын

What was the length of bolts you used for mounting to the crash bar?

@TheRwdyAudi 3 жыл бұрын

I used the bolts and hard ware that came with the kit they fit perfect even withy medications, rough guess they where about 3 to 4 in long

@daniell4227 3 жыл бұрын

Did you have to modify or cut the front crash bar at all?

@TheRwdyAudi 3 жыл бұрын

Techicaly no techically yes I did have to drill 2 holes to mount for mounting but they where approximately 1/2 "

@djdreamproductions 11 ай бұрын

You happen to live in Florida?😂. I would pay anyone that knows what they’re doing to put forged internals in my b8 A5

@THENathanWhitmore 3 жыл бұрын

Where do you get a grill like that?!?!? I can’t find one anywhere!

@TheRwdyAudi 3 жыл бұрын

I did another video on the grill install and there's a link in the description for them

@michaelstephenson-nn4qb Жыл бұрын

How did you get a hose around the hard line on drivers side I might have to move the intercooler over I’m struggling

@TheRwdyAudi Жыл бұрын

if memory serves me i ende up removing some extra plastic out of the way. i assuming your talking about the ac lines. you can lean on them a little bit with out to many issues just dont strong man them. hope this helps. you got this

@michaelstephenson-nn4qb Жыл бұрын

@@TheRwdyAudi Ok I’d wish you showed more of the drivers side of the car With the installation of the FMIC It’s seems to be the hardest side to do with charge pipe Mine didn’t come with the O ring I’d thought it was in bag, but it wasn’t I’m going to try and make the green one work Or go to a auto parts store to find one This is the last step for my car, to be fully stage 2 You’re video has been so helpful This is going to be my last purchase from CTS If it wasn’t for your video I would be lost with this install

@TheRwdyAudi Жыл бұрын

Your very welcome my dude. I will say this installation was bit corky. They had several different fmic kits for the same chassis, which made things alittle odd to order. I'm almost willing to bet you could put a fuel injector o-ring on there. Be careful with that little o-ring it could hypothetical cause a nice sized vacuum leak,giving you other issues.

@michaelstephenson-nn4qb Жыл бұрын

@@TheRwdyAudi No problem I’m just using it for temporary use Until I hear something from CTS You’re right There are different options of FMIC out there I should’ve went with the IE, because I had the tune

@michaelstephenson-nn4qb Жыл бұрын

One quick question When you put O ring on the pipe Did it sit up on the sensor

@manuelsantiago8021 2 жыл бұрын

does your audi have the audi drive select?

@TheRwdyAudi 2 жыл бұрын

@prasiddha1986 Жыл бұрын

Do you think I can install the intercooler hose and throttle body hose without taking out the bumper?

@TheRwdyAudi Жыл бұрын

Sry took me so long ... yes you should be able to do that with out a problem.

@prasiddha1986 Жыл бұрын

@@TheRwdyAudi I was able to but I have k04 so need some modifications with the pipes

@TheRwdyAudi Жыл бұрын

Good stuff 👏

@vipergames7009 Жыл бұрын

Burn your Audi Oil?

@izzetaraboga_272 2 жыл бұрын

What did you do with your pulsation box??

@TheRwdyAudi 2 жыл бұрын

Elaborate for me I not sure what "pulsation box" is ?.... (edited 2 mins later) I googled "pulsation box" it gets removed. Sry bout that I was reading you comment and scratching my head at the same time lol

@nickcosta6399 2 жыл бұрын

whats ur diverter valve setup?

@TheRwdyAudi 2 жыл бұрын

The b8 runs a "forge" Hybrid valve.(google FORGE you will see alot of clones THERE JUNK if you buy one spend the few extra bucks )

@erikestrada2408 3 жыл бұрын

Whats that sensor in the back of the badge/grill???

@TheRwdyAudi 3 жыл бұрын

That is for your Homelink aka the garage door opener. I pretty sure all b8 models had this as a standard option I may be wrong tho. you can tell if your car is equipped with homelink by looking for 3 identical button located by the near the front dome light.

@erikestrada2408 3 жыл бұрын

Did you see any performance improvements with the intercooler?

@TheRwdyAudi 3 жыл бұрын

Yes the butt dyno could feel a difference with just the fmic, even with out having a tune on the car it was definitely a noticeable change I would beg to say it was mostly iat efficiency over anything else maybe 1 psi🤷‍♂️ (no boost Guage 😂) , the big difference came after tuning.

@erikestrada2408 3 жыл бұрын

@@TheRwdyAudi thanks for the info im currently stage 2 and they suggest intercooler so I ordered the one from ecs im using your video as reference for install thanks again.

@samyoule 3 жыл бұрын

Your issue with the metal flanges is that it seems you bought the intercooler for the allroad, not the a4

@TheRwdyAudi 3 жыл бұрын

That makes since. You wouldn't think the front end would be that much different i wonder what the difference are side by side

@samyoule 3 жыл бұрын

@@TheRwdyAudi I’m installing mine right now, that top pipe going straight into the manifold is a painnnn took me like 2 hours

@TheRwdyAudi 3 жыл бұрын

That one was alittle funky i do agree not bad over reminded me of playing tetris😂😂

@HeadsUP253 3 жыл бұрын

I like the Korean flag

@TheRwdyAudi 3 жыл бұрын

Thanks I'm Korean gotta represent the heritage

@HeadsUP253 3 жыл бұрын

@@TheRwdyAudi Me too sweet! Where you from im in Washington

@TheRwdyAudi 3 жыл бұрын

Missouri just hop skip and jump away

@buttah4738 2 жыл бұрын

Where I can find a stock Intercooler

@TheRwdyAudi 2 жыл бұрын

DM me on ig i have one from a take off job

@jacobhyre8239 3 жыл бұрын

Does this add hp and how much if so?

@jacobhyre8239 3 жыл бұрын

Really considering buying if so

@TheRwdyAudi 3 жыл бұрын

Technically yes and no .... a fmic will give gain you better IAT (intake air temp) and doing that by cooling the air coming into the motor that your turbo just super heated ,colder air means denser air. Which means more air shoved into the engine. So yes it you will see gains and feel it bit where your really gonna see the max benefit of a fmic is once your tuned and have all the boosty bois coming from that ko3

@ukkooutinen2165 2 жыл бұрын

You have a turbo upgrade on it?

@TheRwdyAudi 2 жыл бұрын

At the time of filming this no, that said the goal with this build has always been to build to support the end goal power number of 400 wheel for daily us, that cts fmic is good for upto 600hp efficiency range

@ukkooutinen2165 2 жыл бұрын

@@TheRwdyAudi which turbo did you/will you get? Looking for one myself but I'm struggling to find it

@TheRwdyAudi 2 жыл бұрын

There several options on the market ... are you state side? How much power you try to make ?

@ukkooutinen2165 2 жыл бұрын

@@TheRwdyAudi around 250-300 not so much that it would break the car

@TheRwdyAudi 2 жыл бұрын

Stick with a ko4 ... look into frakenturbo I've ran alot of his stuff and personally have a set of his turbo running for just over 10years now with alot of abuse on them and there still going strong

@TheUndergroundbeats 3 жыл бұрын

If someone has to cut and weld a marketed plug and play application, that doesn't seem like I product I would want out of the box.

@TheRwdyAudi 3 жыл бұрын

I've been told by other viewers my customer must have purchased the allroad kit, cant confirm that but it would make since 🤷‍♂️

@JuanBrolo 3 жыл бұрын

Exact same intercooler they put in my b6 kit... This kit fit like total ass. Without cutting my ultrasport bumper all over and getting rid of all my grills I cannot have it with the bumper on.. also had to flatten a pipe just to get the damn headlight in.. not impressed at all with the quality of this cts kit. I have installed ebay brand kits and amazon ones that did t require all the cutting and shit this expensive one did.

@chriscreighton-gf7ys Жыл бұрын

YOU SKIPPED RIGHT OVER THE INFO I NEEDED FROM THE UPLOAD WHICH IS THE ROUTING OF THE PIPES THE REST OF IT WAS SELF EXPLANATORY BUT THE PIPING I NEEDED HELP WITH

@TheRwdyAudi Жыл бұрын

Yo I'm sry I try to make sure I go over everything. What exactly is your problem I'll do my best to help you out