American Craftsmanship @ its Finest! AGAIN 👏🏽 👍🏼☺️

these plasma cutters are expensive but are precise and powerful

Man--that is some nice fab work. It's so nice when you work in a hop and you have the tools you need,. That plasma table and metal press brake are awesome--saves so much time--even have that hyd. hose press machine and all the fittings--that right there is worth it's weight in gold. With all that stuff under roof--you can come in anytime and fix stuff up--you won't use them every day-but the more your use that stuff-the better you get-the quicker you get. Thanks for the trip!

Years and years of practice have paid off for you and Kevin.

Love this video, i'm a sheetmetal men, now and then we do floor panels on a laser but then you have to turn the sheetplate over with the tears down👍👍😎

A huge savings. Having the tools to fabricate your own replacements sure beats forking out mega bucks. Great job Clint.

Keep them coming and keep Kevin away from the sugar. Hyper as hell and funny as shit. Lol

I compliment you guys for nesting your cuts on the plasma table. Very sharp!

You are the Bonsia master of heavy equipment for sure. Trim here, a cut there and before to long bygolly it turns into a dozer, nice and yellow and green.

Great work making those panels.

I use to run a plasma rig, but it had 2 tables and 2 torches. Set two plates on, bump all 3 locators on each plate, load the program and hit cycle start. While it was burning, you went to the other table, off loaded the skeleton and put all the parts on pallets. Steel was delivered by a semi, that pulled up right along side the machine, and we used a magnet on an overhead crane to off-load the semi. Same magnet was used to load steel on the tables. I cut a LOT of heavy metal parts for the CAT 235 and 245 Excavators.

Those CNC plasma tables pay for themselves in no time at all, especially in times where it's hard to get parts. The panels turned out great.

Nice machine and repair. That loader will still be running 30 years from now.

Great job fitting those panels.

My Afternoon go too!! ..Settled in ,,Enjoying !!Cheers!!;-)!!

That plasma table was definitely a good investment!

Watching the CNC Plasma at work is fascinating - so quick and easy really in comparison to the 'old days'. Eventually will have it finished - time waits for no one and it takes time to do these jobs.

Loved how you put those floorboards together Clinton , looks factory That Plasma tsbld you have is s game changer mind ! Love your attention to detail ! 👍🏽

+ C&C Equipment: Another really GOOD video, guys! Liked watching the plasma table work, doing panel & floorboard cutouts/finish work w/ all the required holes/openings. Impressive that that much time is spent/consumed getting things/fitment 'just right.' Others., most likely, would neither take the care you do nor be nearly as concerned about having the _"finished product"_ be nearly as good as you do. Such as repair to/of the 'single cooling hole' that wasn't perfectly cut. That's a true testament to the character/commitment shown by you & the business you represent. As per usual, the presentation gets the standard _YT_ 'thumbs-up' award. Keep 'em comin', guys!

"Slick" job, well done.

Clint, watching this video shows just how much knowledge you have and how you are willing to try and learn things you don't know with zero hesitation. Great job and video, you make them so interesting to watch all the jobs you take on.👍👍👍

Perfect Plasma Tunes.❤

And shes already finished and on the lot for sale!! Beautiful work!!!

Side panels look really good with all those holes in em !

Great work Clint 👌👏👏👏👍🍺🍺🇬🇧

Really nice job with those panels, especially the floor ones. I think that's your forte Clint, but you always do good work.

Nice job Clinton , you certainly have the skills to pay the bills indeed !

Magician

Beautiful work, I can hardly wait for Kevin to do his magic & the next video.

Starting to come together looking good Clint 👍 👌

Heck yeah Clint, you did an excellent job on those panels. Looks like factory for sure. Can’t wait to see them painted and put on. Thanks for sharing this with us.

Great job again. I say make a engine/motor panel for the RHS to match the Left Handside. Then the two side panels will match the grill.😁 Then sell the original RHS panel and that will pay for your time. Oh 💩 I forgot it's not a John Deere!😆😆

Good job Clint

Guestimation - that's a technical term - only highly experienced professionals really understand how to do it.

Making it happen Making part is a leg up on the competition waiting on parts Great video

Hi from uk guys👋👍 clint that plasma table is a beast man and was good watching it punch all them holes on first trans cooler panel and the bigger engine panel👌 good stuff and also this time delay for parts is mental at moment I mean how things working out some people need the space others dont have that time to wait👍 but you did fantastic job b👌 thanks for your time and be safe see you soon👍👋

That's what i call self sufficient every think you need to make a perfect job well done 👍⭐

You have been very blessed very young to have a chance to play with all those cool toys.

Hay boss man, it's g[[d to see you doing some of the work 🙂👍

I love videos from Clint and Elmo. That plasma cutting table is a beast. Thanks for sharing. Michael (from Scotland)

Clint ,I bet you can even make the coffee at break time. 🤣

Really excellent work. 🙂👍🇮🇪

My OCD say's make the other side so they both match Save that one the next might need that side Great job👍

Not bad, on cutting those 'breathing holes' in the plates, not bad at all! Good welding Kevin,.... ( I was told to say that )

Mad skills at work! That metal melting plasma cutter table is a beast. Enjoying your videos a lot, thanks.

Yep! Patrick AFB (now space force base) is pretty much ocean front property. Was stationed there for 6 years and left in 2017.

Who needs factory….. those look as good as factory would. Another great video. Thanks for sharing!!

Need to put some flip up stop for your plasma table so unloading of fork lift would be easier

Thanks as always for another workshop tutorial there Clint. You and Kev make a good team. Nice to see the ol Dresser "getting" dressed now with her new outfit. soon be time to paint then rock and roll!

Man, Clint...some very nice work there! I'm amazed at how well you can metalwork. Very impressive!

You should have used your C&C logo for the hole pattern in that side panel. Good work.

Yessir, some fine looking work being done right thur.., looks great…! Thank you sir.

Nice work 👍👍 ya can't leave that other side panel like it is. The holes match the radiator cover as well. It all came out really nice and fitment was spot on 👍👍

Great job Clinton, I also watch your other youtube friend Chris from letsdig, because you guys have the same work ethics. I am the same because you do it right always and nothing haunts you later. I have great respect for you both, good work Mr.C!!!!

Thurough

Your side look better than the factory side

You're good

really nice work with the plasma cutter,you do a very nice job can't wait to see them painted and final install 👏👏👍👍👌

Looking good nice job

one thing i notice in almost all the vids is the dude that never stops sanding with that DA sander man he is a beast. retierd bodyman. nice job on the panels. nice looking unit. cheers.

Really great work! Panels look real nice. Your attention to detail is awesome! 🇦🇺🍺🍺

Very nice.

Hey Clint!! Floor panels turned out great. Better do the right engine panel too. You know who ever buys it will want it to match lol.

Very cool 😎 video and learned another thing about the process of making a good piece of metal for a machine so it will last and added support is good for the soul 👍😎🇺🇸NY

Great how you guys fabricate parts, great video to watch, your son gets to make some new decals, and of course we all get to see a new paint job.

Another great video. I can’t wait to see the finished machine.

Clint I am twice your age so pay attention Get your self a one inch sq cold roll a foot long and start at one end drilling a threw hole just so your tape goes threw it now clamp it to the plate you want to tape with tap in 1 x 1 to a line hole and then clamp welding clamp is good now you have a straight and square guide for your tap and over the years my 1 x1 has a lot of holes in it for many size taps I made mine 45 years ago and still room for a few more holes ,the simple things on the bench made life a lot more easy.And stamp your wife's name on the side of it and tell her you named it after her.I never lose mine because it's big and on top of my bench always.Charlie.

Looking forward to the next video,Nice job, Let's go Brandon

I like the look of your engine side panel better than the original! It looks tougher. It's going to be a nice looking piece of equipment Clinton! I can't wait to see it finished. Just a thought, why not pull off the right panel and make another one so it matches. And then you'll have a factory ride side panel for another tractor if needed.

Eglin AFB...near gulf coast...South of I-10 in Florida.

Very good work Clint enjoy your channel.

Client we have the same plasma table. Now that they don’t make them anymore we had to upgrade the brains on ours. If you ever run into any issues let me know and I can hook you up with the company that helped us out. I can say we have had no issues with it once we switched. Our table runs M-F 10hr days

The content is awesome, keep on doing what your doing, I look forward and enjoy every video,

A length of cold steel bar stock about 1/8" to 3/16" can be put into the groove of the bend to make an over angled bend. You can use wider stock for less sharp bends too.

A left handed welder Well so am I.

It's just main amazing you doing work on the plasma cutter. Another great video , Clint.

Just like a bought one

very nice

Super fabrication work, as you’ve said, factory fit. You should etch C&C with the plasma cutter to leave your signature on your work.

Hello Clinton, It's possible we saw you working on a Saturday morning and then your Dad showed up and gave you some "Good job" comments and then Tucker came in for a bit, probably working on his pick up and then your special friend Kevin showed up and the video was done. When Kevin get's his magic happening it's going to be a very nice looking project! Really enjoy your videos so thanks. Cheers from Canada.

Great workmanship as always. Love all the tools !

Another great video, I learn something interesting ever time I watch your channel. Thanks!

I like your content, your work, and Kevin's help.

Nice work! Is it time to change the water in the table it looks a little like a septic tank. 🤣🤣🤣

Wonderful job, lookin' good.

Very nice tools, put expensive cool

Very good work Clint

Looks great as always

Looking good

On a 74 175C, there is a cross member between the floorboards. Seemed to be about 1" or 1-1/4" angle iron. Ps, excelent work! Kudos!

Craftsmanship 👍👏 By the way, what a nice machine is that plasma cutter 👊

Amazing machine.

Looking forward to seeing it moving some dirt.

Everything looks good 👍, including the bubble gum express 😂.

I’m ready to see it working!

Perfect fit Clint look forward to next video 🦘👍

👍

The side panels and the floor panels look good

Patrick AFB is in Satellite Beach Fl which is right on the beach on the east coast. I live 30 minutes south of there.

You have some awesome equipment! Great job!