Love Jonsered. have 70e that dad and I bought new in the 70's. Sat on the shelf in the basement for close to 20 years. Took it to local Stihl dealer for a once over. Told me the best thing was to use it for a decoration in a man cave. Found Husqvarna dealer in Ripon, WI. gaver the once over. Wow I forgot what a beautiful saw to run. Bucked up one hell of a pile of wood. Fealt 20 years old again. Love your channel

My favorite Jonsered was a 52E used by professional log fallers in NE Oregon. My dad had a saw shop and sold Homelites (back when Homelite had Production saws) and Jonsered. My favorite Homelite was a 924. Jonsereds were fast and very dependable. I bought a Jonsered 2050C for home use and very happy with it and it surprises the neighbors on how fast it cuts. Thanks Tinman for your videos.

Cool to see a Jred, thanks to your buddy for loaning it to the channel. I agree on the freehand filing Tinman, once you learn how to do it, it’s the only way you’ll ever sharpen a chain again.

My buddy had one i believe he ran a 4 ft. bar on his and he could run through a big gum like butter here in N.C.....badass saw

One of my old buddies dad was a jred dealer from mid 80s thru around 2015 when he retired from logging full-time. Went to hi school 90-94 and remember all the badass saws he was selling back then. Was tons of piece cutters in our area back then

Love the Jonneysred. By far my favorite brand. Thanks to you and your buddy for showing us that awesome saw.

I would agree nothing beats knowing how to file by hand, a file and the Mk 1 eyeball is all you need.

My 2094 is semiretired. Want to keep it for fun cutting. Built 066 clone ported muffler mod for blocking. Building 2 more for sons they keep threatening to blow up 2094. They are jerks.

True classic. My 2171 is one of my favorites in my collection

Thanks to your buddy, great to see this old Johnny running, it's really clean, worth looking after

Use to run Jonsered 70 and 90 back in the early 80's, those saws had lots of power, they never quit.

Shout out to the owner of the saw! Love the free hand filing once someone learns it its the cats meow, agree less to carry and less mucking around just run that file over it and just send it!

In my opinion Jonsered saws absolutely destroy the competition in power and rugged reliability. I own two and with any luck will have more like the one your very generous and trusting friend let you barrow. Thanks friend.

afleetcommand says there’s no replacement for displacement and THANK YOU Tinman’s buddy fórumes of the saw!

A formidable saw, it runs and runs and runs 🤘👍

Thanks, kind saw owner, for letting Tinman share your powersaw with us. I like to see those big saws in action!

Thanks for the video, I've been patiently waiting for you to put that 2095 into some wood after the teaser many months ago. I have a 2095 I use for big stuff as well. It just doesn't bog down. My favorite saw to use. I also just finished a full restoration of a 2165 now with a 2171 top end. Jonsereds are my go to old saws. I have a couple more 2165 turd saws to restore, they might end up my first port job if I can bring myself to grinding on OEM cylinders. Keep up the good work Tinman.

Jonsered made some hella wicked muscle saws... the 8 and 9 series are AMAZING

jonsered did make awesome saws allready in the 60s and 70s wery good saws.

had a jonsered felling saw in the mid ish 70's don't remember the model number. ran a 36" bar easily, oiler may have been manual, to long ago for my memory, went p62 after it tuckered, ms660 now. retired now but still use 660 for two households firewood. love your channel

Had one of these in the early 90s ran grate lots of power but had trouble with the starter rope cover braking often. Fly weel or starter dogs would hook it and brake it.

Don't let Buckin see you stab those DOGS!

Love the Jonny reds been running them since the mid seventies ! Ran the beast 2095 when I had a firewood cutting bussiness, that saw would tucker you out

Thanks for the great video and demo! I love Jonsered. I currently have four models, and each one is just perfect! I would love to get a 2095!!!!

Have you ever tried cutting a stump round in a circle with the top of the bar? The sawdust stays in the cut and acts as a cushion so the bar won't get stuck and you don't need a wedge. Great vid thanks, have a jred 630.

Thanks Tinman's buddy! That thing is a beast. The biggest saw I have is a Husky 257 I bought new in 1997. It's real low miles on it and stock except for a recent muffler mod, that it really didn't need as it was pretty open from the factory. I just wanted it to sound a little better. I got the power saw fever! I'm up to 15 saws now, just nothing big bore like you have. I even ended up with a couple Partner 55's. Up to this point, I never heard of them before, but they're built in Sweden. I built one from the two. I did a mild port job and machined the base to get my target. 020" squish. I ended up with .0195". I checked the compression before I started and it was 105 psi. Then using the best piston, the best ring, and the machining, brought it up to 155 psi. I'm in the final stages of tuning now. But boy are those Partner saws ugly in my onion. Some of the models look like a boxy looking toy. Lol. Take care Tinman, you inspire me.

Thanks for letting us see a 2095 in action. She's a peach. 👍

Hey Tinman I love your channel keep doing what you do! BTW Thank you Tinman's buddy for the jonsered!

Awesome saw! The big bore 90+cc saws are a lot of fun. My 395 os a blast to run in big wood!!

Got one from a rrash pile. Its a project. Nice to see from this video that its a project worth while.

Nice to see a 2095 in action, I've got one here that's missing a few small bits, I look forward to getting it sorted and throwing chips.

I just put a 2095 to my Saw collection awesome saw.

Thanks for the demo on that monster! Wish I'd had one last year when I had to flush cut some 2' and 3' dry stumps, but I made do with my Husqvarna 261 and a 16" bar 😛

Thanks Tinman's buddy. Nice saw.

I use a Husqvarna roller file guide when sharpening my chain. I have used many different guides and for me this one is by far the best. People have said they don't get the gullet very well when using one but I have not had this problem. Every so often I practice free hand and am getting better but I still primarily use the guide.

Love the channel. Try using a bore cut on those stumps. Bore in two thirds of the width and walk the saw around using a pushing chain, keeping the nose of the bar in the centre and the stump will sit on the chips. You won’t need a wedge and the saw won’t get stuck 👍

Great saws Brother! I run Jonsered CS2186 Turbo, an Old Jonsereds 90 (wrist breaker), Jonsered 670 Champ, Jonsered CS2165, Jonsered 621 and Jonsered CS2152 autotune (screamer saw). I also have a Jonsered 535 bought new in 1987, still has full compression even though I cut nothing but big English Elms with it for 2 years. Great Channel!

TY TINAMNS BUDDY U A GOOD FELLA. These saws (395's) are SUPER popular in Australia cause our timbers dull chains so quickly even when you don't hit metal. Common to run a 20" bar.

Thanks for sharing this! That saw sounds amazing and I really like how you keep it simple with filing. I only use a guide when filing ripping chain at 10 degrees. I cant do that by eye.....but I’m sure someone can!

I’ve got a 670 Champ that’s probably cut over 1 million feet of timber and it still runs well! Can’t beat those old Jonsereds!

Was just gifted one of these,(2095 turbo) with a 24" bar and half link chain. I did myself a favor and took the rakers down almost a 8th of an inch with a flat file 😂🤘 thing pulls chain like an absolute monster

Jonsereds are great machines. The name is now owned by Husqvarna AB. Most Husqvarna and Jonsered machines shared identical parts. I once ordered a Husqvarna starter pulley for my Jonsered! That was 1992.

I have a few of these saws. Great machines

Have one of these 2095’s on my 600+ chainsaw mill

Thanks for this video, I'm just about to buy that exact saw.

Love those saws! Thanks for sharing. And a big thanks for loaning this monster to the Tinman!

Have 3 -2166s and a 2188. Love my jonsereds. Too bad husky shut them down. Getting parts for any older saws nearly impossible. Was just pulling a 36” bar on a 45” stump the other day. My 2188 went right thru it.

Advertised horsepower in 1993 was 7.1 with 93.6cc and came stock with a 36" bar option.

She pulls chain eh!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

I bought a 2165/20” and a 2095/42” on an online auction for $385 but had to drive 410 miles round trip to pick them up so probably invested $500 total. They were owned by a county road department and had very little use. IMO they’re strong saws.

Helped my dad mill a ton of wood with one of those, it was so loud that as a kid I was wearing earmuffs when going on the loo 100 meters away from the mill 😅

My boss has a mint 1976 Stihl 090 AV. The thing is truly a monster. These Jreds are awesome though.

Don't you worry tin man. Once I catch the right lottery ticket. We will both have husky 3120 's. Just because.

Great saw 2095 is a beast .

I just learned today that a friend of mine has a saw like that for sale. I’m hoping to buy it soon. He was using it with a 42” bar and it just didn’t seem to have it, 28” or 32” on the other hand.. oh you betcha it will pull!

Hahaha I got lucky today an caught the tinman befor I went to work awesome video as always man I always love jonsered saws red just good color haha

I have been trying to get my hands on a jonsered 2095 for a long time!! I have had the pleasure of operating one before and it's a monster!!

New subscriber and first video watched on the channel. Love me some Johnny saw action!! Thanks to the fellow that loaned this saw to the tinman!!!

She gets after it I also have a 394. I love it the only Down fall I see is their bar adjuster is a bit flimsy

had a jons 670 super 10 yrs ago sold it and regret it now it was a beast of a saw would eat anything

Bought my 2095 in '93 or '94 after my 525 poulon pro was stolen. Still running like a champ and cuts like a beast, but it is boat anchor heavy.

Size does matter , came with my Jonsered 600 saw mill, no dogs on saw mill version 😁

I kinda miss hand filing saws but my shoulders are eat up with arthritis and I can't handle doing it anymore !

THose ol garden tractors sure dig in eh

I love the jonsered had one year ago just finally got another

That monster is sweet , Saw-gaszmic🤤

Very to the nice, beast of a saw!

Thanks buddy enjoyed watching this saw rip

Crazy it looks so similar to my craftsmans 4620. Except it’s all metal in construction

When the chain is good - you see chunks, not dust. I think that you have that "summer house" model chain on that and modded roller.

That there is a BEAST bud!!

I love my 2071 83 88 95 series jreds

Great video and beautiful saw

Those saws were animals 👍

Had a 2095 it was bad ass

That's a beast of a saw

I would prefer a jonsered over any other saw. My climb saw is a 2139t. Fast som beach. 2166 is my most used saw at work outside the tree. I have tons of saws I use but I like em red the best.

hey Tiffany you need to find a homelite 2100 and port it will make a nice big hot chainsaw 11 14 2021

Great saw! Thanks to the owner for lettin Tinman rip it!

Howzit Tinman! ALOHA from Maui brahdah!🤙🏾😎

There’s no replacement for displacement. I like big saws I can not lie, when I want to cut I don’t waste time. Yes my Husqvarna 2100 will still pull a dull chain at the end of the day.

As I'm cutting stump's off I pick up twigs and put them in the cut so it doesn't sit down on the bar and I have to go find my wedges

1993 17.6 pounds 7.1HP up to 36" bar chrome bore 93cc Johnsereds Fabrikers AB 2095 1991-1996 17.4 pounds 7.1HP up to 48" bar chrome bore 94cc Husqvarna Vapenfabris AB 394XP

It’s like buckin says it’s only heavy when it’s not in the wood lol.

I have seen quite a few from 2077 and up with the cases busted out in the front right under muffler they tell.me it caught a nice size branch or whatever and next thing bar oil running out

Good Old Powersaw Jonsered.

That air filter setup looks like an EFCO ......

I still have mine bought in 1980 think its a 621 fires right up.

I own / use 3 of those 95er's, they really cut but are rather heavy...

Big thanks to Tinman’s buddy for the use of the saw! 🤙

Were nice units them! New subscriber! Good stuff

i have a Jonsered cs2171WH with a 24" bar... you shoulg try one Unlike you, i prefer small 50cc for most cutting. I have a cs2152 Ulticor with a 15" bar for that. That thing cuts fast. I only use the 2171 for bigger logs

i love Jonsered i have 3 of them i rember they made a 2083 and a 2083II

I love it. Gettin the gullet. Love the saw. I run a mid size 391 with a 25” bar. Wonder if I could run a 30” bar on it? Might not oil. Don’t know

Awesome 👌

I paid $200 bucks for a 625, now its not a big one, but the dang thing has cut enough wood to pay for itself several times. She just cuts and dont quit.

Good stuff! Thanks!

thanks for having us brother

The turbo keeps the filter cleaner

It's all in the fi-lin friends......yep !