Back Window Tint VW GOLF Made EASY

Рет қаралды 634,894

2 жыл бұрын

Hands-on 3 Day Classes APRIL, MAY and JUNE!
mytintstuff.com/products/tint...
Special thanks to the channel supporters!
MyTintStuff.com
SunDistributingDirect.com
TintDepot.com/tintstuff
PlotterDepot.com
TintWiz.com
Geoshieldusa.com
SunDistributingDirect.com
Here at Sun Distributing, we believe that the supplier of the window film should know every aspect of the business. It makes it hard when a tinter or tint shop needs support but their supplier does not know the business from one end to the other. I started as a tinter helper in 1989 and worked my way up to the point of distribution. Along the way I have put together a successful retail tint shop and know every hurdle that a tinter and/or shop owner could face. I believe that there is an extreme value to having a company with our experience in the industry having your back.
TintDepot.com/tintstuff
[BULK AUTO FILM ROLLS] - [PRECUT AUTO FILM] - [PPF] - [VINYL WRAPS] - [ARCHITECTURAL FILM] - [DECORATIVE] - [SAFETY] - [ SOFTWARE & PLOTTERS] - [PARTIAL ROLLS] - [WINDOW TINT TOOLS - Squeegees, Knives, Scrapers, Blades, Hard Cards, Corner Cards, Demo Kits, Sprayers, Meters, Side Swipers, Back Glass Paddles]
tintwiz.com
There are many helpful apps and tools available, but most software out there are not designed to tackle the specific workflow and challenges that present themselves to tinters. Tint Wiz is a CRM app designed specifically for window tint companies. Book appointments, create proposals, send invoices, schedule jobs, manage tasks, and more.
MyTintStuff.com/
Glass Aid is a 10 mil thick protective cut resistant strip that is meant to protect the glass from your knife. It’s white color make it easy to see through even the darkest of films. It’s flexible construction allows it to easily be formed around corners and it is heat resistant so it won’t melt during shrinking. Glass Aid is also designed to remove cleanly so you don’t have to worry about leaving adhesive behind when you remove it. This product is perfect for beginners and pros alike!
PlotterDepot.com
If you’re ready to revolutionize your business with a Tint & PPF plotter system, we’re here to help. On PlotterDepot, you’ll find absolutely everything you need to modernize your operation, including plotter machines, software, and a stunning variety of high-quality vinyl. Whether you’re a small mobile shop or an established enterprise that serves dozens of customers each day, our products can help you reach for that next level of performance. Reliable, affordable, and trusted by professionals around the globe, you can shop confidently for plotters solutions on PlotterDepot.com.
Check out GeoShieldusa.com

Пікірлер: 129

@jamesjine1702 Ай бұрын

Everybody keeps talking about how they tried, failed, and let the pros just do it. Well I’m trying to become a pro so these are good videos for that matter, and only way to gain the skill set to become a pro is trial and error while taking notes from the pros themselves. 👍🏻

@FadeToBlackLLC Жыл бұрын

Awesome video. Yes some of these are a Pain to do. I just did the harder one a week or so ago and it faught me.

@joeldwarika8356 Жыл бұрын

Genius,,,I've tried on my golf 5,was nerve wrecking,just let the pros do it.this video really motivates me to keep trying..thank you...excellent job👌🙏

@andel900 7 ай бұрын

This is easy one for golf 5 , its not even close

@s.o.s.exploration2412 9 ай бұрын

Thanks for the video. I have a 2004 Passat 1.8T 5-Speed Wagon that I am restoring. Currently have 2 amplifiers running in the back and I want to refresh myself on tinting since its been a minute. Wasn't sure how to approach the trunk hatch. Having some UV blocking Nano tint will help keep the insides cool so my equipment doesn't burn up. 😉

@rickysirocamaroz28 Жыл бұрын

Dam you made that look eazy!! I’m working on a 02 civic hatchback ep3. Tired it once and I had trouble. Going to tackle it again tomorrow.

@ClanSSQ Жыл бұрын

Excelente siempre me disfruto ver tus vídeos. Tengo 12 años trabajando esta profesión, amo y me encanta mi trabajo. Siempre mejorando y aprendiendo con tus vídeos. Saludos desde venezuela!

@patrickgillespie9423 Жыл бұрын

Well i came here to tint my rear window, it failed miserably but thanks for teaching! I'll have my re-tint the rear window again.

@BuzzNuttz001 4 ай бұрын

I failed twice this afternoon

@jollywgiant1760 4 ай бұрын

Same :( Didn't know i needed to shrink it :P Cheers

@BRM101 2 ай бұрын

Looks easier than it is doesn’t it, it’s definitely a skill that needs to be learnt

@Dominicwylai Жыл бұрын

You make this look soooo easy... Not looking forward to do this myself though😂

@masonbarnett3927 2 жыл бұрын

Did one a few weeks back. I need to schedule a class with you.

@kesodabul 2 жыл бұрын

I needed this video lol perfect timing

@lubohristov6234 11 ай бұрын

is so easy when you do it :) i have problems with top edges on golf 5 every time. Maybe my misstake is thats i start from middle to the sides and also my clients want cheep film

@mynyasabut Жыл бұрын

i like the new word "tacoed" LOL very technicaly descriptive

@shamskl3245 Жыл бұрын

Great job 👍

@taebuckz9556 2 жыл бұрын

Wow I just tinted a fiat 500 shaped the same it literally gave me hell I’ve only been tinting for a month lol it took me 5 days to perfect it and I still had little creases in certain spot but nothing to major.

@nikola_stijakovic Жыл бұрын

Thank you. I had problems with it.

@royrush2492 2 ай бұрын

I’d like to see one done on an older VW Beetle. I had a heck of a time with the back window

@midwestcatz5896 Жыл бұрын

man hes slick with it

@arturseversons3444 Жыл бұрын

it always looks so easy on youtube, yet I can't do it 😄 tried a few times, always ended up throwing that effing film in the bin and doing something else

@FadeToBlackLLC Жыл бұрын

Some of these are a PITA. I just did one too that took 3 tries.

@rohannlacost4371 Жыл бұрын

Thanks for that video helped me How to tint my customers VW GOLF 2016. What kind of white tape you used and the squeegee? Thanks in Advance

@Dynsam_ 2 жыл бұрын

Great job! Can you show how to do it with ceramic tint? Shrinking them is so much harder for me.

@anthonywhse3266 2 жыл бұрын

That's perfect, I see what was my mistake cutting it on the edge when I shrink it I keep burning some edges good advice

@thomasadmiral3401 Жыл бұрын

what do you use for spraying?? soapy water? or some special compound? Is the point to be slippery? Thanks.

@thedarkgreenvanman 2 жыл бұрын

No way I have a Golf! This is a great tutorial

@Glassfortification1 2 жыл бұрын

Lovely

@pipstarpipstar3852 3 ай бұрын

❤ Excellent...

@jvazquez7160 29 күн бұрын

Which film do you recommend I just did a corolla hatchback own I tried walmart and autozone and those are garbage too thin it wrinkles when I used the heat gun and rip so easy what brand do you recommend

@AaronLitt675 2 жыл бұрын

Have a vid of the vw Beetle? The newer 1

@user-um4sc3nu3r 6 ай бұрын

Hi, what temperature do you set the heat gun to?

@professionalbaddass Жыл бұрын

Just did one of these yesterday wish I watched this video first I work at a cadillac dealership so we don't see much variety of cars

@muratcaglar8114 2 жыл бұрын

Adamsınız 👍👍

@phanthomas0154 Жыл бұрын

HI. What material is the tool you use to thermoform the film? Thank you. 😂

@titoramos5302 Ай бұрын

Hello what tint do you recommend for best shrinkage?

@gabrielgrigore9091 4 ай бұрын

Hello At what temperature should we work at bay 6 Thank you very much

@Mad-Man84 Жыл бұрын

Where to buy that clay bar you were talking about ???

@myshots101 2 жыл бұрын

I don't care what anyone says, I like my rabbit seals. The best seals on any car, I can't hear all the noise outside the car. It's freaking awesome.

@seanguy9720 2 жыл бұрын

What are rabbit seals? You mean VW Rabbit?

@myshots101 2 жыл бұрын

@@seanguy9720 Yes, 2007 VW rabbit.

@lapulapupintado2892 2 жыл бұрын

The same thing with my 1987 Scirocco 16v the seals around the front doors and the trunk lid seal are very tight, it's like closing a "Bank Vault".

@user-nu4cx5pc8k Жыл бұрын

So easy ~ korea is tinter world

@Bezpokraski Жыл бұрын

what is this white thread and where can I get it in Russia or what can I replace it with?

@dannythebest1008 2 жыл бұрын

What kind of tape is that white tape?

@neamtuzahar Жыл бұрын

Hi, what should be the temperature?

@blackbirdborges7486 2 ай бұрын

Qual nome da fita branca colada em volta do vidro para demarcar a serigrafia ? Obgdo !

@rkmobilecarwashdetailing7746 Ай бұрын

How many inches roll do I need to tint rear window

@watchdaride Жыл бұрын

this one is easy the older models ones are the hard one

@fivas 2 жыл бұрын

i tried tinting bmw e46 wagon rear window and i wasted 2 rolls of tint only because I tried tinting without heat gun and then I tried using hair drayer and only got half window tinted and even that half window had "fingers" I think I will buy heat gun and more tint because I want to learn this skill :)

@ganchovalchev7935 2 ай бұрын

Do you have results now ?

@granthenry4326 Жыл бұрын

Thank you but the mono crystals in the glass and how they are designed collect dirt if you squee side ways.

@kevinvermoen2297 Жыл бұрын

what is that white tape that you stick along the window before you cut the tint to size? and where can you order it?

@FadeToBlackLLC Жыл бұрын

Glass Aid that he sells

@hbote80 6 ай бұрын

Hey man, I'm not sure If someone asked you did already, but you know when you cut that film around the wiper, where did that round cut go? I couldn't see it when you finally installed the film. It looks to me that it was all straight, did you cut it again straight? If you did that, would that have been shorter? Please explain. Thanks.

@xaviorrigters608 5 ай бұрын

4:38

@HEADBANGRR Ай бұрын

Hello Matt, whats the purpose of rubbing a drying sheet on the glass? Thanks

@my_carp_life3424 Жыл бұрын

Will the film damage the demister lines when taking it off again in the future?

@TannerTints Жыл бұрын

It can happen yes, be sure to make sure the custom understands this, I have a little T&C document for them to sign ✍🏽

@superevostevo 2 жыл бұрын

How do you do this? I keep putting cresses in the film. The door windows are so easy compared to the back. I have a evo 9 I don’t think the glass is curved that much. I’m on probably my 6th pice of film I’m about to give up. I’m in Michigan as well how much would you charge for the back Im using the lexen carbon

@superevostevo 2 жыл бұрын

So I managed to tint the rear. Now I’m running into the issue that the tint isn’t sticking to a portion of the black dots on the bottom of the window.

@southerntintandautospa5484 Жыл бұрын

I’m hoping you’ve realized the Lexen film is the issue

@maoriznaction4054 Жыл бұрын

What are you using to press the tint out on the outside

@FadeToBlackLLC Жыл бұрын

MacTac

@mauricemulder2579 2 жыл бұрын

With how many degrees do you shrink it?

@FadeToBlackLLC Жыл бұрын

Turn it all the way up.

@jameslanders6170 Жыл бұрын

Now I've watched a couple videos on tinning. And the hair dryer Usage. But damn your video shows a whole lot more and it looks amazing. So not only now do I know that my 96 Jeep Grand Cherokee tent that I bought cut out oh I just got to put some fucking square in it. Is so far off I want to shoot myself. Well done thank you and keep it up coz because none of these videos that I've watched really show that whole heat shrink not hair dryer heat shrink. Thank you

@eldrickejleest Жыл бұрын

Is that heat gun on the low setting or high setting?

@FadeToBlackLLC Жыл бұрын

Seems a lot have asked this. All the way up.

@Cobra83. Жыл бұрын

My heat gun has 2 settlings , which is better the higher heat 1 or the lower hear?

@FadeToBlackLLC Жыл бұрын

Higher.

@MRGAZMOND0 2 жыл бұрын

Do all films shrink this way ? Can the film melt if too much heat applied ?

@DetroitTintStudio 2 жыл бұрын

Yea they all do, some slower than others. You can mess it up really easily either not shrinking enough or over shrinking so it takes practice

@abrown5516 2 жыл бұрын

I tried tinting my Civic ep3 hatch and wasted 8 feet of film kept bunching up in corners I gave up going to take it to a shop!

@aneldelic2468 Жыл бұрын

Its golf 7 and that ia easy . Hard ones for beginers are golf 5 and 6. There is not even close to golf 7.

@sandeepsinghuk911 Жыл бұрын

👍

@michaelcloherty5352 8 ай бұрын

Why didnt you put on the tint in the inside of the window

@Cobra83. Жыл бұрын

What heat setting are you using?

@TannerTints Жыл бұрын

Always the highest, control the temperature output by moving it closer/further away to the glass

@user-bf1le3fz3h 11 ай бұрын

Can I use a hair dryer instead?

@antoniocarlosborges5905 2 жыл бұрын

Gostaria de saber que marca é esse filme ? Porque está muito fácil moldar .

@gabrielgrigore9091 2 жыл бұрын

Hello What temperature is the gun? Thanks

@futbolfanzofficial1772 Жыл бұрын

Did he remove film cover before heating it with the heat gun?

@FadeToBlackLLC Жыл бұрын

Leave the liner on.

@busker_boy_c2845 Жыл бұрын

Do all tints stretch ?

@TannerTints Жыл бұрын

None stretch, they all shrink

@sky_wong Жыл бұрын

How many heat gun temperatures??🙏🏻

@kyians 10 ай бұрын

Put it to full and bring it outwards to your from the tint and determine what is the best place to hold your heatgun

@MohamedSayed-pt7vf Жыл бұрын

What is the temperature of the machine?

@FadeToBlackLLC Жыл бұрын

All the way up, then use distance to work the heat.

@glenross9467 Жыл бұрын

would this not get chipped or scratched really easily.

@TannerTints Жыл бұрын

How?

@rajinkajun-2576 8 ай бұрын

What’s the dryer sheet trick all about??? 🤔🤔

@Brian-cr1ep 2 ай бұрын

Removes lint

@Andrewmegstualu 2 жыл бұрын

What about them beans appearing in the middle after you squeegee everything they usually apers in half an hour or so . Nearly every VW or Audi window of newer cars does that

@DetroitTintStudio 2 жыл бұрын

I’d try turning on the defrost on 1 min before install. Leave it on until you are done installing the film. Helps me on chargers and 300s

@charlestrotter6789 2 жыл бұрын

@@DetroitTintStudio I have that problem with Chrysler 300s for sure. Never used the defrosters until I saw you doing it on vehicles. Very smart!

@westside_tints8197 Жыл бұрын

@Tint Studio clay bar always on those. then after the first shrink lift film and re shrink again. good luck.

@yuro6053 2 жыл бұрын

where can I get that tape from?

@straightfactsbigracks2358 Жыл бұрын

Tint depo it’s $7

@MegaBabysassy Жыл бұрын

@@straightfactsbigracks2358 glass aid

@Vinnytint2 2 жыл бұрын

Omg I hate that back glass

@steveclara8945 2 жыл бұрын

Who here has ran into ur film getting wierd scratches at different angles while installing it ..and it mostly at the bottom..after everything is installed..I have to pull it off ..such a pain in the ass ..even on windshields it happens

@westside_tints8197 Жыл бұрын

your tools are scratching the film get new ones. use a bulldozer for the back window at the bottom.

@corel965 Ай бұрын

Fuck when i apply heat and want to make it flat my foil break and make those tiny lines, btw is china cheap one 😅

@shahmin8869 2 ай бұрын

easy for profesional...i try it,but i failed...5 hours..🤦....still failed

@__215xalbert__ Ай бұрын

Same

@audriusv4393 2 жыл бұрын

Mk7 is not hard. Mk5 is more interesting :D

@DetroitTintStudio 2 жыл бұрын

It still has it challenges but yea I mentioned to the older one was more difficult. I’ll do the same things on that one that as in this video

@lapulapupintado2892 2 жыл бұрын

My 1987 Scirocco 16v was a lot of work. I had to remove the rear hatch lid and the rear side windows.

@MA-sp9dl 9 ай бұрын

Tried tinting my car and failed miserably. Let professionals do their job. It’s not so easy as it seems.

@rv5409 Жыл бұрын

Mistr

@saaamaak 2 жыл бұрын

Take your pick, creature comfort vs uncompromising rear view

@paul5683 2 жыл бұрын

Wtf? It looks like you missed a couple of inches along the drivers side. What kind of shit is that?

@DetroitTintStudio 2 жыл бұрын

U need new glasses Paul

@user-ur4dv9jt8t 2 жыл бұрын

stupid divorce of lazy scammers. you need to glue it from the inside, otherwise the film will quickly be scratched

@TannerTints 2 жыл бұрын

Excuse me maam?

@jdparadis4925 2 жыл бұрын

You didnt watch the entire thing did you?

@user-ge8rr4sy1c Жыл бұрын

What is the white tape?

@NeonNerd87 2 жыл бұрын

Tried tinting the back of my 02 WRX and it kept pinching and creasing, used xpel and soap bar to prep. Will be trying dryer sheet next, soap probably made it stick too much (even though I did h pattern) every swipe of my felt card was a crease. 🥲 thanks for your pointers!

@jasongammoh4114 2 жыл бұрын

I was struggling with creasing a lot of back windows and it made me realize that the card is the problem even though more experienced window tinters told me its from me using a card i didn't believe it until after I failed many times use a glove to smooth it all out and omce its all nice and shrunk with no big chunks of film then use a card to flatten it out

@DetroitTintStudio 2 жыл бұрын

Ahh that’s interesting . I never liked using a glove and learned with a gold Teflon card. I’ll have to look into that. Always looking for easier ways to help people along