I hear that humming sound in my car, i thought it was the original sound of the engine. I'm at the later stage now, its so loud in my car.. thank you so much. I ll take it to my mechanic tomorrow. 😢

Really great video. The sounds are what I wanted to verify, and other videos wouldn't stay long enough on the sounds to hear it. Thanks..

This is an excellent video. Thank you.

Wow your video is the first to actually show us the various stages of the bearing from problem start til bearing near its final stages and is super helpful with what we need to listen for, thank you !

Best audio I've heard. I definitely heard the same humming in your video as if it was in my vehicle that settles it it's definitely a bad hub bearing now I just have to find the right one there is a little play in the Shakedown test on the driver side however there was a boot horn on the CV axle passenger side I just had replaced which makes me think it's on the right side but the Shakedown test passes on the passenger side as for the rotation test they both sound the same

Thank you for creating this very informative video!

Thanks for making this video.We have a 2013 Impala LTZ. For months the car had a vibration especially at 70 MPH. We took the car to the best car repair center in the city. comes to find out, there was a bad wheel bearing on the drivers front. I had both front wheel bearings replaced. Car aligned. Two new front tires. Car is back to normal.

Thanks for sharing so many great tips.

well done video thank you

Great video

Eggcelent!!!!

Great video, I checked the play in the wheel but wasn't sure because the issue recently surfaced. I'll visit the mechanic to have them replaced.

Awesome video, thanks

Thanks

I have side to side play, but no up and down play. When another person is moving to lifted wheel from side to side, I can see the movement at the cv axle and bearing being separate from the hub assembly, but I have Zero noise other than slightly hearing the pads brush the rotor. The ford focus has a fairly bad vibration starting at 50mph and dives to the right during breaking and pulls during acceleration. Ball joints and tie rod ends appear fine. I don't know what else it could be other than the wheel bearings, but any other time I have had bad ones I could always hear them and all the other information I can find says that you will hear them; Which makes sense. The silence of them has me second guessing my diagnosis. Can you think of another area that I might check out? But I am positive that I see very small separation movement in the rear of the knuckle to hub assembly. The movement is on both sides equally, which also makes me second guess myself.

Waoo seems ppl don't have that much this wheels bearing problems, I've this problem can't figured out clearly what is happening, I've ABS light on 10000 miles I've driven already, is this dangerous to drive ABS light on? Toyota corolla 09 175,000 miles on, mechanic told me to just to change 1 side of wheel bearing 350.00, seem when they touch minimum 350, this vdo educated me. Tkx

Does the click noise get louder and sound like a pop clunk noise afterwards?

my wheel play, but bearing itself is fine. Sometime just need to follow the WIS and adjust the bearing properly (using dial indicator)

my mechanic should repair my car today, this video was exactly what I had on my ford escort, thanks

I have a vibration when braking, I changed the discs and pads, could it be the hub?

would this cause a clunk like a arm? i replaced all suspension still hearing a clunk on dirt

I am now convinced that it is with my car

Is the car has vibration that can be wheel bearing to?

I think my Camry has a bad wheel bearing as I hear loud sounds when driving at highway speeds. I read that you should only drive 1000 miles max with this issue. Is that true or can I push it off longer?

Will you feel a grinding feeling in the gas pedal at lower speeds

Bad wheel bearings can also be weird you can get weird noises at medium speeds, between 40 and 60 km/h, but you can hardly notice it when you reach 90 to 100 km/h. In my case, my 2016 Mazda CX-3 gives off a bad chopper and rumbling like noise between 40 and 60 km/h, but it goes away over 80 km/h.

what if my mercedes makes a Thud-thud-thud-thud-thud sound? and when i drive faster it makes faster thud sound? and when a turn into a driveway it makes a scrape sound in the rear passenger side?

Can a bad bearing also cause scraping sounds?

It even sounds like if the noise is coming from the engine

I have this problem with my car and it sounds like engen problem until my mechanic told me it was wheelbearing problem

Sounds like a humming as if I need to shift the gear up but it's in top gear.

oh good a video that actaully had the noise, i am 99 percent sure this is the exact noise i hear in my car. it began about 11 days ago. so i am assuming that i am still good to have it repalces son. oh and btw. i live in Michigan we have pothold galre here every winter and just came out of winter. so it would make sense that this could cause it

Can't believe you were doing 100 with bad wheel bearing lol

at 2.41 sec where u say at a later stage...u are actually wrong this is not the sound of a wheel bearing in its final death stage this is infact the sound of your car just before it takes off and turns into a plane

I’m never sure with the noise but it definitely pulls to the left I’m gonna do a shakedown test tomorrow

Would it also be possible if the the wheel bearing has failed and wheel wobble is happening. Could negative camber or leaning of the tire from the top occur?

I feel like I hear something but not 100%