Somewhere To Hang My Hat, making some coat racks

Рет қаралды 14,652

4 жыл бұрын

Hello and welcome to Badger Workshop. I thought is was about time I made some coat hooks. I made a few types, some with shaker pegs and others with wire hooks. Links to tools and parts bellow.
Tools I use
www.amazon.co.uk/shop/badgerw...
As an Amazon Associate I earn from qualifying purchases
Support me on Patreon
/ badgerworkshop
Support me with PayPal
paypal.me/badgerworkshop
Social Media
/ badgerworkshop
/ badgerworkshop
www.badgerworkshop.com

Пікірлер: 127

@philliprowland2161 4 жыл бұрын

I love watching builds like this. So many of the other KZfaqrs have turned it into full on production videos and tried to add gimmicks. Give me more of simple builds and watching someone do their best with what they have any day. Keep it up man.

@Badgerworkshop 4 жыл бұрын

Thank you very much

@karlpopewoodcraft 4 жыл бұрын

Very nice build and enjoyed the slow motion comedy shots.

@Badgerworkshop 4 жыл бұрын

Thank you very much

@christofix 4 жыл бұрын

Very nice build my friend. I like the intro with the coat hanger missing. Also loved the slow-mo in your video. It was a pleasure to watch!

@Badgerworkshop 4 жыл бұрын

Thank you. I was having fun playing with the new camera

@garethsharp4039 4 жыл бұрын

Great video Matt, love the new production values, and the injection of humour is great!

@Badgerworkshop 4 жыл бұрын

Thank you Gareth

@awantamta 4 жыл бұрын

A very practical project nicely done

@Badgerworkshop 4 жыл бұрын

Thank you

@sawdust58 4 жыл бұрын

Thanks for sharing. Nice project.

@Badgerworkshop 4 жыл бұрын

Thank you

@TheGrantAlexander 4 жыл бұрын

Very nice. Slow mo is always fun to watch!

@Badgerworkshop 4 жыл бұрын

Thank you

@matzmx 4 жыл бұрын

We need to fund this dude so he can get a bigger workshop. Hopefully he will build it himself from scratch.

@mountainviewturning5319 4 жыл бұрын

Great looking coatrack

@Badgerworkshop 4 жыл бұрын

Thank you very much

@Josh_Luijsterburg 4 жыл бұрын

The Matt Hatter Hanger. Great job 👍👍

@Badgerworkshop 4 жыл бұрын

Thank you Josh

@Kahuna1239 4 жыл бұрын

Loved the slow moo Matt.

@Badgerworkshop 4 жыл бұрын

Thank you

@moreteavicarfromengland8299 4 жыл бұрын

Grand job again Matt cheers

@Badgerworkshop 4 жыл бұрын

Thank you

@malcolmcoward7480 4 жыл бұрын

You're definitely scoring with new camera. Content was always good but vast improvement in actual picture quality and incidental exploration of slow-mo, etc. Lovely little project, well done Matt keep it up!

@Badgerworkshop 4 жыл бұрын

Thank you very much Malcolm. Its a great camera

@FredMcIntyre 4 жыл бұрын

Awesome work Matt! 😃👍🏻👊🏻

@Badgerworkshop 4 жыл бұрын

Thanks Fred

@christopherdean3606 4 жыл бұрын

Love this project, simple and well executed. Love the slow mo bits, great humour 😂. Keep up the great vids. Cheers ☕️

@Badgerworkshop 4 жыл бұрын

Thank you Christopher

@MakeOn 4 жыл бұрын

Very nice hangers! And beautiful shade of blue on that one. Great edit, light and rhythm, loved it!

@Badgerworkshop 4 жыл бұрын

Thank you very much

@williambuckley1185 4 жыл бұрын

I really liked this video, I also like the way you talk through the job, you are a good teacher and I am going to give this a go. thank you :)

@Badgerworkshop 4 жыл бұрын

Thank you William

@YESSLEEP42 4 жыл бұрын

Nice build! Great Video!!

@Badgerworkshop 4 жыл бұрын

Thank you very much

@markpowell6885 4 жыл бұрын

Nice build. Consider adding a flush-cut saw to your tool chest....

@Badgerworkshop 4 жыл бұрын

Thank you

@keefykeef 4 жыл бұрын

Love that brass screw/black hook combo 😍

@Badgerworkshop 4 жыл бұрын

Thank you Keith

@NomadMakes 4 жыл бұрын

NIce laid back vid, as always ;-) Great humor.

@Badgerworkshop 4 жыл бұрын

Thank you very much

@Everythings_Adjustable 4 жыл бұрын

Those look great Matt, nice video 👍 😊

@Badgerworkshop 4 жыл бұрын

Thank you

@charlesarnold4963 4 жыл бұрын

Lovely.

@Badgerworkshop 4 жыл бұрын

Thanks Charles

@Thesidingsworkshop 4 жыл бұрын

Nice slow motion ...... that saw gives a nice clean cut cracking find there mate. And looks great after you restored it. I Like the hooks good work

@Badgerworkshop 4 жыл бұрын

Thank you very much

@barryroberts6470 4 жыл бұрын

Some very nice coat and key racks made there, well done. Barry (Wirral, ENG)

@Badgerworkshop 4 жыл бұрын

Thank you Barry

@LonghornWorkshop 4 жыл бұрын

They all look great! The intro and the slow mo...lol great stuff.

@Badgerworkshop 4 жыл бұрын

Thank you very much

@hansdegroot8549 4 жыл бұрын

Great little project. The coat racks came out very well. Thanks for sharing. I'm sure you'll sell them soon. It'd be a nice Christmas present.

@Badgerworkshop 4 жыл бұрын

Thank you

@nigegrumlin6636 4 жыл бұрын

These videos are so much better than the short 5-6 minute ones. Best wishes from North Yorkshire.

@Badgerworkshop 4 жыл бұрын

Thank you Nige. This is good to hear

@markgoode4109 4 жыл бұрын

A very funny beginning to the video; made me smile. The project turned out very well. Just the sort of thing people will need; I'm sure they will sell very well. As ever, thanks for sharing and best wishes.

@Badgerworkshop 4 жыл бұрын

Thank you Mark.

@mikedeman5351 4 жыл бұрын

Very nice project. Love your dry sense of humour :)

@Badgerworkshop 4 жыл бұрын

Thank you Mike

@MakingItOutOfTheWoods 4 жыл бұрын

Oooh, lovely as always, have a similar project coming up myself - watch this space 🌲🦊🌲

@Badgerworkshop 4 жыл бұрын

I will watch with interest

@David-xu3yk 4 жыл бұрын

My favourite has got to be the blue coat rack.

@Badgerworkshop 4 жыл бұрын

I think thats my favourite also

@samstirling4279 4 жыл бұрын

Oh my goodness, yet another project that I was planning on doing. Thanks for sharing you’ve given me some more ideas. Where can I get the badger glue from - nice touch 😆

@Badgerworkshop 4 жыл бұрын

Thank you Sam. My stickers are finding their way on everything

@user-oy4gf6ck5u 4 жыл бұрын

I really found the video enjoyable !!! Although i like wood not to be painted , i was quite surprised with the blue one , it came out fantastic and i also enjoy that sense of humor in your video which it wasn t excessive and yes you where aggressive on those poor dowels . Ι relly enjoy the video and great job as always !!!!!!!!!!!!!!!!!!!!!!!!!!

@Badgerworkshop 4 жыл бұрын

Thank you very much

@Bill.L.Carroll 4 жыл бұрын

🤣🤣bwahahahaha🤣🤣 Love the invisible coat hanger on entry, man! 😆

@Badgerworkshop 4 жыл бұрын

Thank you Bill

@AMG63 4 жыл бұрын

🦡 I could watch you all day long. 👍

@Badgerworkshop 4 жыл бұрын

Thank you very much

@matthewharding6245 4 жыл бұрын

Nice video. My favourite is the blue one. Just a thought but with a slight design change you could have made that piece symmetrical so the one cut would have made two end pieces, saving you a little time and waste wood.

@Badgerworkshop 4 жыл бұрын

Thank you

@michaelevans1658 4 жыл бұрын

Good job Matt ,the small ones will be good for dog leads.

@Badgerworkshop 4 жыл бұрын

Thank you. Yes they world be good for that

@Lyndalewinder 4 жыл бұрын

When you are using smooth dowels, put them longways in a vice and run a tenon saw down to make a 1.5 mm slot along the length and then you won't have as much trouble getting them in the holes! Otherwise nice video Matt

@Badgerworkshop 4 жыл бұрын

Good tip. Thank you

@tonyalways7174 4 жыл бұрын

Hey I sense a touch of Stephen Spielberg in the menacing slo-mo combined with Charlie Chaplin and the coat rack. A new future lies ahead :). Nice result though and thanks for sharing

@Badgerworkshop 4 жыл бұрын

Thank you Tony

@JoelWetzel 4 жыл бұрын

You mentioned making some extras to sell. I've never had such an outlet and so haven't made as many things as I could have and those things I have made tend to find their way into piles, stacks, heaps, and mounds. Do you mind my asking where you sell?

@Badgerworkshop 4 жыл бұрын

I had a stand in a local antiques store.

@_dobs 4 жыл бұрын

Nice build, what are the little countersunk inserts you are using to enable them to be put on the wall?

@Badgerworkshop 4 жыл бұрын

www.toolstation.com/screw-cup-socket-inset-knurled/p30281?store=D3&gclid=CjwKCAiAzanuBRAZEiwA5yf4uv3GUztMGEQU06-2Gpxz9IsEN8ixb_Buiy1fWKOhIn2enQ_gVZOY0xoCbxQQAvD_BwE

@_dobs 4 жыл бұрын

@@Badgerworkshop You sir, are a star, thank you.

@chrissullivan2948 3 жыл бұрын

Hi Matt going over some off your uploads whilst laid up. Can I ask where did you get the brass inserts to finish the coat racks. I can only seem to find threaded ones which I don’t think you used - stay safe

@david-un3om 4 жыл бұрын

Nice detailed project. How do you find the planer/thicknesser. Was looking at that model. But worried about it taking over the workshop. Whats the footprint like and would you recommend. I see screwfix sell a smaller model which might be more the size, but is probably not as good.

@Badgerworkshop 4 жыл бұрын

Thank you. I really like the machine. I can cut it under a bench when not using it. The cheaper ones have much louder motors and i did not want that.

@frankslittleworkshop 4 жыл бұрын

Nicely done Matt (As always) 😁👍. I think I must have missed something... have you got a new camera ? Quality looks good but slightly darker than usual !. Love the project, they should sell like hot cakes. Keep up the great vids 😁👍.

@Badgerworkshop 4 жыл бұрын

Thanks Fred. Yes got a new camera a few weeks ago

@Mr_Judge_Benny_Hinn 4 жыл бұрын

can you check your audio settings please, seams low compare to your other videos...always a good build...

@jdigou1 4 жыл бұрын

yeah i agree

@animationcreations42 4 жыл бұрын

You really pushed the boat out with the Farrow and Ball paint! It's good stuff but it's bloody expensive! I have a coat hook, but I find it's far too much effort to hang up my coat, so they just end up strewn across the sofa!

@Badgerworkshop 4 жыл бұрын

It is pricy but they have some very nice colours

@andypedroza 4 жыл бұрын

I just love the slow mo music🤷🏻‍♂️

@Badgerworkshop 4 жыл бұрын

Thank you

@Jazzwayze 4 жыл бұрын

I like projects like this, as I can't manage big builds any more. I couldn't quite get the make of the blue paint you used, and where did you get the brass countersink inserts please? I have subbed and liked. So I'll be seeing you. John in Brum.

@Badgerworkshop 4 жыл бұрын

Its farrow and ball hague blue. The brass inserts come from tool station

@Jazzwayze 4 жыл бұрын

Thank you Matt. Reminds me of when I built my first woodwork shop, in Handsworth, Birmingham. My word that's a long time ago now! Cheers. John

@theweepinghunter 4 жыл бұрын

cool build can I ask where did you get your glue bottle from and what do you think of it Thanks

@Badgerworkshop 4 жыл бұрын

Its a Gorilla glue bottle i washed out

@paulcoumas 4 жыл бұрын

Hi Matt, is the aesthetic the same for the through dowel joints and a plugged screw joint? Do you get your oak from a mainstream store or a local sawmill to you? Thanks

@Badgerworkshop 4 жыл бұрын

They should both look the same. I use a sawmill in Yorkshire

@stevebosun7410 4 жыл бұрын

Hi Matt, your "flush cut" saw would cause less damage to the surface if it didn't have the spine on it. Can you remove the spine? It might just be an interference fit.

@Badgerworkshop 4 жыл бұрын

Its not a flush cut saw but i do need one

@stevebosun7410 4 жыл бұрын

Yes, I realise it's not actually a flush cut saw, but you appeared to be using it as one. I was only suggesting that you may be able to do less damage by removing the spine.

@karlpopewoodcraft 4 жыл бұрын

Hi Matt what's the camera your using picture is great. I'm looking to upgrade. Cheers Karl

@Badgerworkshop 4 жыл бұрын

Its a Panasonic GH5

@JohnMadeit 4 жыл бұрын

You hang up your coat just like my kids at the beginning of the video 😆

@Badgerworkshop 4 жыл бұрын

I will try harder dad

@JohnMadeit 4 жыл бұрын

@@Badgerworkshop haha

@marB84 4 жыл бұрын

That slomo tho! Ooeehh...

@Badgerworkshop 4 жыл бұрын

I do like this camera

@negotiableaffections 4 жыл бұрын

Such variety and a satifying easy design. And you chose a little one for yourself? Btw, watching paint dry is NOT suitable for the slow-mo treatment, phew!

@Badgerworkshop 4 жыл бұрын

Thank you Keith