I just installed the hitchpod with your harness - excellent! I will not cut wires and always looking for a customized plug-n-play solution. This is it!👍
@hotshotoffroad2 жыл бұрын
Glad to hear that you were happy with it! Exactly what we were shooting for!
@madcatmorty3 жыл бұрын
This is exactly what my Taco needed! Never hurts to light up the night when backing up is concerned (especially on trails).
@hotshotoffroad3 жыл бұрын
And I see you dropped an order in too! Appreciate you! I'll get it on the road today.
@darthr01g412 жыл бұрын
Got me some just now, pod combo and harness! Can't wait to install it!
@hotshotoffroad2 жыл бұрын
Awesome! Appreciate the support! We did just run out of HPs the other day, but others should be here later this week so keep your eyes peeled for a shipping notification!
@v8felon2 жыл бұрын
Ideal location but also ideal location to get jacked up this is the first thing to drag offloading and 1st thing to get hit by distracted drivers!
@mikemorgan46702 жыл бұрын
Very cool item, ingenious and simple. Great install video.
@hotshotoffroad2 жыл бұрын
Awesome thank you for the feedback!
@cb4x43 жыл бұрын
Looks like I need one of these!!! AS for a hitch lock, Ive had good luck with the Blu Ox brand locking pins. If you dont tow often, you could use a Hillman 5/8" x 3" (length depending on vehicle/hitch) shouldered bolt w/ nut.
@hotshotoffroad3 жыл бұрын
Is the Blue Ox brand "longer"? That's the problem with the Toyota variants as they are "sleeved" and as a result require a slightly longer pin to work. I have just run into that issue on this truck. I would rather have one lock that doesn't require me to swap hitch pins as well when I swap between pod/tow ball. Thanks for the recommendation!
@LRHOGFAN2 жыл бұрын
Would really love to see one of these harnesses that ties into the factory reverse lights on a Ford Bronco but also is able to be switched off and on using one of the six Bronco aux switches. My understanding is that there is a wire near the back of the cargo area that would be perfect for this type of application.
@hotshotoffroad2 жыл бұрын
We actually have a harness that will be coming soon that will leverage the OEM trailer connections from the back to be PNP. Have one testing on a Bronco right now actually! If you wanted to you wire up an additional trigger for the S1 you could.
@LRHOGFAN2 жыл бұрын
@@hotshotoffroad I saw your instagram post and will be following.
@hotshotoffroad2 жыл бұрын
Awesome appreciate the support. Creating a harness (or add-on) for upfitter switch tie-in might not be bad. Taking notes over here. Appreciate the support!
@boeing-lt4el2 жыл бұрын
Question - instead of the model specific harnesses, why not just have a universal 4 or 7 pin plug that goes into the trailer plug?
@hotshotoffroad2 жыл бұрын
Funny you should say that! We actually just teased a week or so ago (on our IG) a harness that that works exactly as you describe! We had to work out some QC and stability concerns from our end to make sure that we're providing a quality product. We should be releasing it in just a few weeks.
@boeing-lt4el2 жыл бұрын
@@hotshotoffroad great news! Sorry i'm not on IG, I subscribed to the channel here, hopefully you can do a 30 second vid or a short to announce. I'll be getting one for sure👍
@hotshotoffroad2 жыл бұрын
We just might be able to do that!
@PTRRanger951 Жыл бұрын
Using the actual plug doesn’t make it look factory and in the long run will cause issues with the cover of the plug rubbing on the wires and bending them I ran into the issue with a lightbar under my tailgate on my F150. Unless you get a really stout plug and wiring to attach the light to that will protect the wiring, the covering will eventually chaff the wiring on the harness. But regardless of what you use, the cover will want to force the plug to one side as the pressure of the cover on the plug is pretty decent. If you use a 7 pin harness it will be overkill when you only need two wires, and will stick out like a site thumb. It’s easier to take the extra 5 minutes to wire it directly to the reverse light for a factory look and less issues. That’s if you don’t want the specific harness, but for their price why not? It’s pretty cheap for what it does.
@240sxdriver2 жыл бұрын
Memario is a stud -Spike Spiegel
@davidcolinstillman55853 жыл бұрын
LIKE IT 👍 WILL HAVE TO CHECK IT OUT & THE $$$ THANK YOU 🙏 BE SAFE ! HAVE FUN ! GOD BLESS YOU ALWAYS ON 🙏 YOUR JOURNEYS / TRAVELS ! ENJOYED 🍨 🍨 🍨 🍨 🍨
@PepeDeezNutz2 жыл бұрын
Cool
@martinneps93872 жыл бұрын
Where can I purchase one of these please comment back thank you so very much
@hotshotoffroad2 жыл бұрын
Hello there! We have our combo kits with the HitchPod and an S1 available here! hotshotoffroad.com/products/hitchpod-combos
@Tjkruse9889 Жыл бұрын
Just wondering how u did the hole wiring need to do this for my colorado
@hotshotoffroad Жыл бұрын
We built a harness that worked with our Tundra's taillight signals, but we now make a universal harness that works with most current makes/models out there! hotshotoffroad.com/products/universal-hitchpod-s1-harness
@Mac4Willy2 жыл бұрын
Does the plug and play cable work for a 4runner.
@hotshotoffroad2 жыл бұрын
We do not have anything currently at the ready for the 4Runners, but we were just able to source 4Runner connectors here a week or so ago! Finishing up the details of them now!
@gabrielbeach54262 жыл бұрын
Does this have the plug and play harness for Chevy Silverado?
@hotshotoffroad2 жыл бұрын
Nothing in the works for a PNP for a Silverado, but we are finalizing a universal PNP type of harness for anyone with the current standard trailer connections! Don't worry, it will all be hidden too!
@rodrigohueso8676 Жыл бұрын
Will this work with a 21 Colorado Zr2
@hotshotoffroad Жыл бұрын
Yes it sure will! No issues there!
@01sctacoma Жыл бұрын
Do you have a link for those Tacoma reverse bulbs?
@hotshotoffroad Жыл бұрын
Shoot me an email at info@hotshotoffroad.com and I can toss a few options your way!