Bambu P1P Review - The BEST 3D Printer I've Ever Used?

Рет қаралды 121,648

Күн бұрын

Play World of Warships here: wo.ws/42tBE5W
Thank you World of Warships for sponsoring this video.
During registration use the promo code "WARSHIPS" to receive a huge starter pack including a bunch of Doubloons, Credits, Premium Account time, and a ship!
The promo code is only for new players who register for the first time on the Wargaming portal.
Welcome everyone to my first official review of the Bambu Labs P1P! This printer sent me on a little bit of a roller coaster ride at first! I hated it! It wasn't working and I began to worry that all of the hype I was seeing across the pages was just hot air!
But after a quick firmware update; It was near perfect. it worked. It works.
So join me today while I talk about the new Bambu P1P and why it's turned into the best 3D Printer I've ever used!
▼ MENTIONED IN THIS VIDEO
P1P | tinyurl.com/h2...
Companion Cube STL | tinyurl.com/3v...
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
AMAZING Discount Codes! | tinyurl.com/4a...
☞ Check here for Up to Date Discounts and Codes!
ELEGOO| tinyurl.com/3z...
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | tinyurl.com/yh...
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
BAMBY LAB | tinyurl.com/yh...
☞ Visit Bambu for a variety of FDM 3D printers, from entry
level to advanced!
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 40% off awesome
3D models and files!
AMAZON | www.amazon.com...
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
▼TIME STAMPS
0:00 - Intro
0:54 - The Bad
1:32 - Getting Better!
1:51 - World of Warships
3:19 - Test Prints
5:12 - MY Priority
6:01 - 60hrs vs 16hrs
7:47 - Helmets!?
8:35 - A Procrastinator's BFF
9:25 - What does it all mean, Basil?
11:15 - Some Final Thoughts
Disclaimer- This video is sponsored by World of Warships
Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#bambu #3dprinting #3dprinter

Пікірлер: 319

@iMOSKUL Жыл бұрын

@UncleJessy Жыл бұрын

Can confirm Frank initially hated the p1p… I have text messages to prove it 🤣😂 Glad to hear it’s working so much better for you

@Antimatter_Gaming Жыл бұрын

lol uncle jessy keeping him in check

@Anticlock94 Жыл бұрын

I had an ender 5+ that I later found out had a ton of issues wrong with it. However, it made me start to hate 3d printing. I convinced my wife to let me buy the P1P and it restarted my love for 3d printing. Now she hates how much stuff I’ve been printing. 100% recommended printer.

@radish6691 Жыл бұрын

The P1P with the AMS rekindled my love of 3D printing and I’ve been printing almost non-stop, used it to print RepRack brackets so I would have a place for all the new filament I’ve been buying. With the P1P (since it doesn’t have lidar) I recommend using OrcaSlicer (it’s a fork of Bambu Studio) and going through the filament calibration process (they have a wiki page about it). Calibrated filament settings definitely improve print quality.

@shinjiiiiiiiiii Жыл бұрын

Basically the same story here. Probably countless others too. Truly the next generation of fdm printers

@andrewr6861 Жыл бұрын

Because of frank I got a ender 5 plus 2 years ago, it never was reliable until modding it. I just got a x1c with ams a few months ago and it is the only printer I want to use. My ender 5 plus, two ender 3 pro's, ender 2 pro, Cr6-se, and SLA printers have not been turned on since the x1c blew my mind with its speed. I hope Bambu makes a large format corexy, and glad im not the only one that hated the stock ender 5 plus.

@itzmemaariocleantaps8201 Жыл бұрын

i am looking for 3D printer i almost buy a ender machine. so the most people i see buy the bambu p1p (i am beginner) but the parts also easy to get?

@andrewr6861 Жыл бұрын

@@itzmemaariocleantaps8201 from what I know now I would start with a cheap ender 3 for $99 from microcenter. It will teach you the basics of printing and troubleshooting and repairing a printer(with lots of videos to help on KZfaq). If you just want it to print without knowing how what or why Bambu is the way to go but when something goes wrong its going to be very hard to understand and repair as it is a very complex machine with very little videos or information for support. Early on I was frustrated trying to calibrate/ tune my ender and slicer but now that I have the Bambu I have not needed those skills you but very thankful that I have them.

@DarkBr33d1 Жыл бұрын

The information your provide... The wholesomeness of it. And how you love to deliver it. What doesn't go unnoticed is how much importance you give to not shaming folks for what they dont know. I remember watchin your earliest videos and seeing how you've grown and how much you love doin what you do. You're an inspiration bruh. Keep clownin Frank!

@FranklyBuilt Жыл бұрын

Well thank you so much for that! You have no idea how much that means to me

@HangarFry 8 ай бұрын

@@FranklyBuilt This is 6 month late but I have a question I hope you can answer. I am trying to get into 3D printing mainly to make Cosplay items, D & D/Cyberpunk miniatures, statues, and busts. Do you think the P1P would be good at that seeing how detailed you're Mandalorian mask looks or do you think I should go with a Resin Printer. I'm a little wary on Resin because of the smells and possible toxins as I don't really have a proper ventilation space.

@TheDuckDaddy1 Жыл бұрын

ngl you got me on the beginning

@FranklyBuilt Жыл бұрын

Good

@dandrake6165 Жыл бұрын

Those are the Red Hood guns I made in Fusion 360! Awesome to see them here. I watch this channel all the time. I split them so that you wouldn't need supports so that clean up would be easier.

@FranklyBuilt Жыл бұрын

Dude no way! I love these things haha

@dandrake6165 Жыл бұрын

@@FranklyBuilt Appreciate your channel! Learned a lot from you about printing! Keep it up!

@Solid3dMemories Жыл бұрын

Thanks for the video! I just got my P1P yesterday and have been printing like crazy. Now that it is on sale for their anniversary, I couldn't resist.

@richarddunn378 Жыл бұрын

I'm really glad to see this video. Your tiktoks got my into the hobby, and I found out about the Bambu printers last year, about two weeks after I bought my Ender CR-10 v3. I had severe FOMO but I saw your posts on either Instagram or Tiktok about how you didn't like it. This week I've been debating upgrading because while I love my CR-10, I really want something faster. This video pushed me over the edge and I'll be ordering a P1P next week for myself as a birthday present.

@anonymouslimbo5479 Жыл бұрын

I’ve done all I can with my ender 3 and I’ve been looking around for a new print and was debating everything. I shared the same thoughts with the p1p which made me avoid it for a long time. But I’m glad to see them care about their product and users

@TreeShark 11 ай бұрын

I am in the same situation here! I have an Ender 3 V2 and kinda just feel it’s too slow for me after all this time. Did you end up getting a Bambi p1p

@edwardnewbold Жыл бұрын

Very cool. The P1P just went on sale for $599, and I'm going to get one ASAP! Thanks!

@EverythingRandomAllDay Жыл бұрын

Have to say having had an Ultimaker since its release over 10 years ago i picked up an X1C and OMG i havent touched my Ultimaker since and am finally on my way to make a MK6 iron man suit which is why i got into 3d printing 12 years ago. Thank you so much Frank for your videos it has helped me so much towards making a suit and the X1C is right there helping.

@hegga_nm 5 ай бұрын

In one of your older videos you said something along the lines, "Don't print Benchy and then immediately go and print Iron Man helmet as your second print" and you were 100% right at that time, but this printer actually made that not only possible but also VERY easy! Admittedly, I binge watched all of your Iron Man videos before I clicked print and your advices saved me a bunch of time and filament, but most importantly it made my Mark 85 helmet print perfect! 😍 Well... as perfect as noob's 4th print can be... 🤣 THANKS! 😃

@FranklyBuilt 5 ай бұрын

You’re right. The game has changed haha

@earlowens998 Жыл бұрын

The P1P just came down $100 to $599. Take that Creality.

@Antstar12 Жыл бұрын

If I had the space I would definitely be getting a X1C. The P1P and X1C have shaken up the market so much, I hope prusa are working on something to compete. If Bambu labs come out with a X1C XL or P1P XL that can do large prints at the same insane speeds, Prusa, Ender and Elegoo are going to have their work cut out for them. For now I'll be working away on my Ender 3 v2 trying to get the most out of it until I move to somewhere with more space.

@neversleep8820 Жыл бұрын

I think Elegoo is still in a great spot. Their build quality and reliability is insane for the money. Their Plus by far out matches a cr-10 and is only $350, the Max's build volume isn't really needed unless you're doing full body cos play prints.

@goobiesgamegarage4517 Жыл бұрын

I pulled the trigger on the p1p and it made me love 3d printing again.

@GenerlAce Жыл бұрын

same, coming from an ender 3 to the P1P, its revolutionary. i never realized how clean layer lines could look 🤣 This thing is a beast!

@Rhoadspc Жыл бұрын

I don’t know how I’m so late to find your channel man but I love the content. Great informative videos with a fun vibe

@timothykeller9419 Жыл бұрын

Just got the itch to get into 3D printing since ive built my new pc and came across this video, exactly what i was looking for. Great delivery of understandable information, not a bunch of odd specs that mean nothing to total newbies looking to get into 3D printing.

@skyrider4789 Жыл бұрын

I absolutely LOVE my Bambu X1C. I'm going to be buying another....possibly the P1P, but I might just keep with the X1C since I mainly print PETG. Glad you got it sorted and enjoy it!

@skyrider4789 Жыл бұрын

BTW, I've had great experience with Bambu customer service and I think their whole ecosystem w/parts availability and pricing is also great.

@kevinlavin6633 Жыл бұрын

You sold me! Excited to see the difference between the p1p vs. my two E3 Pros! Great vid!

@christophermacier Жыл бұрын

The X1-Carbon is the best printer I have ever used and is feature loaded.

@Edward3DFX 10 ай бұрын

Ironing operations on the P1p is amazing

@ivanrose5161 Жыл бұрын

The next thing you should make is a Spider-Man face shell with a remote that controls the eyes. I have been trying to make it for years but nobody makes a good tutorial on it, but your tutorials are always amazing! It would mean a lot if you could make that at some point.

@Rhonda308 Жыл бұрын

I am new to 3d printing and the P1P is the first printer I've had with no issues ever. I'm actually afraid to get a different brand because this one is really JUST WORKS! I'm surprised you had issues with it but I'm happy I got a good one 😅😅

@ZpeedTube Жыл бұрын

I'm not new to 3D printing, but otherwise same! 😄 Next to zero issues. And when something goes wrong it's usually my own fault! 😅 And AMS makes it super convenient to swap filament even if I don't use the it too often for multicolored prints!

@MattandCamrynReact Жыл бұрын

Ordered mine last night… So stoked!

@andrewmakestuff Жыл бұрын

I picked one of these up on the pre-order, and also had to set up the camera and light. The time I've spent fiddling with my CR-10S made the out of box plug-and-play of the P1P really really nice. I had a bit of a hiccup with something really simple that (i haven't checked recently so maybe it's been added) initially frustrated me: Filament changing. I'm used to having a button press pre-heat and change filament. It took me longer than I want to admit to figure out that I had to pre (or re-heat) the hot end before changing the filament when it would run out, as the hot end doesn't automatically heat when changing filament. While I haven't had any wifi connection issues, it does take a REALLY long time to send and upload the files to the printer. I had one batch of 4 figures take around 40 minutes to upload on the printer before it started. I am probably going to hard-line the printer in as I am also really hit or miss with the webcam working. I printed but haven't set up the part cooling fan. It prints so well without it, I don't see the point of it.

@RogueAgent0 10 ай бұрын

I follow your stuff and enjoy all your videos. I ordered one of these. I’m excited to get it. Appreciate all you do.

@315retro Жыл бұрын

This is exactly what I wanted to hear about this printer. I understand HOW to tinker with these things but tbh I just don't want to. I just want it to work. I don't need tons of filament options. I just need it to work.

@ChiefKene Жыл бұрын

I got the P1S with the AMS. Can’t wait to plug and play

@briwesk Жыл бұрын

i LOVE my p1p. I got the AMS with it, and i havent touched my Enders since i got it. its so great. this is what 3d printing should be. Turn it on, tell it to print, and part comes out great

@PBuffdaddy00 Жыл бұрын

I will get a 3D printer at some point, as it will make getting cosplay helmets and stuff a lot easier. Love the channel and your content. Much respect from down the road in Fayettnam.

@xero7ven Жыл бұрын

Looked for a new printer to replace my ender 3 and this is the one I ordered. Glad the reviews are looking good for this printer.

@PolarIceCreamery Жыл бұрын

Just ordered a P1P based on this video. Sub’d 👍

@Droneflyer3000 2 ай бұрын

When he said "If there was a 300mm cubed printer then my garage would be filled with them." Bro was just giving Creality a sales idea😂

@FranklyBuilt 2 ай бұрын

Whoa. That comment I made aged well haha I forgot

@dragonscalier3576 Жыл бұрын

Completely off topic, but you should absolutely make a small video about all your helmets. It'd be cool to see all the different ones you've made

@tomdelaney19464 Жыл бұрын

I just bought one, thank you being you were why I bought my 1st,lol

@Pickledog2005 Жыл бұрын

Every time I print on my ender 3 , I worry it’s gonna fail but it would be awesome to have a more reliable printer

@mandismith89 Жыл бұрын

build it better with better settings then

@filbert910 Жыл бұрын

Videos from you and uncle Jessy have me wanting to get this printer as my next printer.

@deadlyapollo Жыл бұрын

In the same boat, my X1C is my go-to favorite, just wish it had the same size bed as my Neptune 3 plus.

@star20alpha Жыл бұрын

Also, should note that note only is the P1P 100 USD cheaper, they have also announced the P1S, which is, effectively, a fully enclosed P1P with all the upgrade parts to make it work.

@campbelldaniel58 11 ай бұрын

1:23 is that a Fender Squire in the background? I have the same guitar. Good choice 👍🏽 😂

@hbtv6842 Жыл бұрын

Hey frank hope your doing well. I’m really interested to get into 3D printing to make helmets and other display pieces for not just my own pleasure but also to sell if they turn out better after working on them. Was deciding to get an ender 3 because you said in the past they are a good beginner printer plus they have attachments like laser for engraving but after watching your stream (by the way was very fun to watch) about the Neptune 4 in which I believe you said are good for beginners and faster I am now undeceive. I just want a beginner friendly printer that is reasonably priced and that’s decent speed and quality. As you were the first person I watched about this hobby and do similar things that I world like to print I think your the right man for the job to help me decide. I would love to hear your feedback back but I know your mostly busy but I thought it would be worth a shot. Anyway keep up the great work and amazing videos.😄👍

@Joyntie Жыл бұрын

There is also a top cover for it, incase you want to print materials like abs with it.

@JonasWallecan Жыл бұрын

I had a Ender 5 and lived from issue to issue with it, got my hands on a P1P while being a bit anxious.. but my P1P printed already (way) more than my Ender 5 did in the (almost) 2y i got it... incredible printer. Although for me it's not easy to print helmets in 1 piece on it...

@Wh1terider Жыл бұрын

Just getting into 3D printing and I pulled the trigger on the P1P today. Crossing fingers!

@ericvalentine1497 Жыл бұрын

My second printer is p1p - and I am absolutely in love with it. First was CR-M4... which i havent used since i got the p1p.

@danny-vb8bg 11 ай бұрын

Ive been wanting another printer. I kind of fell put of printing a while back and the cost of electricity just keeps skyrocketing here so i try not to print lately. But youve made the p1p seem like its worth the cost and i think it will be my first printer i spend decent money on. Currently just have 2 ender 3's that i started with. And i think this will be a huge upgrade over that.

@ne0beat555 Жыл бұрын

ive been thinking about getting the x1c as my first printer

@LordWiseWolf Жыл бұрын

Ok now I know what my second FDM printer is going to be. I got the SV06 as my first FDM and to learn. The P1P I feel is going to be sick.

@ajb650 Жыл бұрын

I just asked about this in the live stream yesterday had no clue you we're uploading a video about it

@FranklyBuilt Жыл бұрын

Yep! That’s why I ignored some of the questions haha a LOT of people asked and I figured “they’ll see it tommorow”

@m4vr1ck Жыл бұрын

You underestimate what I can sleep through. I can sleep through a category 5 but if the AC or fan turns off I wake up immediately

@williamjansen2204 Жыл бұрын

When it's time to upgrade, I have some research to do, but this is in the top list now

@MMakes333 Жыл бұрын

Thank you, Frank! Love how informative and in depth all your videos are. You have sold me on this. I will definitely be buying a P1P in the near future.

@saskiot 2 ай бұрын

I used to work at respawn and they have a lot of Apex props that are 3d printed and they look horrible. No sanding or finish work. I'm sure they were amazed by the quality of print Frank sent them.

@sigal5265 11 ай бұрын

Another great review Frank! Man I keep looking at this P1P. I've had suck bad experiences with my old (R.I.P) Creality CR10 Pro that I'm afraid to get another FDM printer. After I gave up on the CR10 Pro, I got an Epax E10 8K resin that I absolutely LOVE!! Not one single issue, nothing!! The CR10 Pro was an absolute nightmare! One day it would print beautifully, the next spaghetti city! I tried everything and constant adhesion issue. I swear it was the "auto bed leveling" that caused issues but whatever. Anyway, this Bambu Labs p1p looks too good to be true. And the price is ridiculously cheap. I'm going to keep watching videos and read reviews but I think I'm sold. The fast speed is nice, but I'd trade that for reliability and consistently. I'd love to be able to hit print like I do on my Epax and know without a doubt that it will print 100% every single time.

@buckaroosan5571 Жыл бұрын

Yeah, if there was a Bambu with the build area of a Max printer with a 0.6 nozzle preinstalled, I would get rid of all my printers for that.

@whatwhatwhat9453 11 ай бұрын

This video got me exited and I don't even care about 3D printers! At all 😂 It is amazing the P1P got all 4 pieces done faster than the other's did 1

@star20alpha Жыл бұрын

Adding a lot of comments, lol. Anywhoo, the "scrapper" you didn't know about? That's actually a Build Plate tool, for when you have to replace the surface of it.

@BrandoDrum 9 ай бұрын

I have a small VR gunstock business that's outgrowing my bank of enders. I'm switching to these. Just ordered my first one

@multiversosdeleo3864 Жыл бұрын

I was about to buy an X1 Carbon untill I watch your Elegoo giveaway yesterday and I said "Ok, the Neptune 4 is the one I want"... And now I see this! 😆 😆 😆. Please stop playing with me man.

@n0vaph0enix Жыл бұрын

FYI, it’s not a “scraper thingy” is a alignment tool for adhering new replacement surfaces to the cool and hot plates

@FranklyBuilt Жыл бұрын

I saw that after making the video haha 😆 my bad

@herbveitenhans3285 Жыл бұрын

I love my X1C, it saves me the one thing I’m short on, time.

@danielbeek4146 Жыл бұрын

The speed and quality are amazing! A full, life sized bender from futurama in 2 weeks, you can’t beat that!

@charlesforbin6937 Жыл бұрын

CONGRATS ON THE STREAM YESTERDAY..............

@avist7 Жыл бұрын

"you won't be able to sleep with this" actually im not too much of a heavy sleeper but it sits about 1 meter away from the end of my bed and im perfectly comfortable with it. it also has a 'silent' mode that prints at 50% speed. if im doing something that has a lot of long diagonal lines where it has to use both x and y motors at the same time, it gets a little loud. i just put it on 'silent' and its very quiet for me :)

@colegonzales6535 Жыл бұрын

Lmao this is one of your best videos yet if you ask me. Keep killing it man!

@mrjonlor Жыл бұрын

Hah! I’ve just got my Ender 6 to the point where I’m super happy with the reliability and quality I’m getting out of it but it’s been a LOOOOOOOOOOONG road to get here (and I’ve got an entire box of stock parts I’ve removed/replaced!) and I’ve definitely learned a lot along the way. There was a point a couple months ago where I was seriously considering something like the P1P….

@kspec2001 Жыл бұрын

awesome to hear your perspective on this machine. not sure if you seen the interview with the CEO of Bambu yet. but they for sure have some more stuff in the pipe to come out. im excited to see what they come out with next.

@chaux13 Жыл бұрын

Thanks for the awesome videos, I been using the X1 Carbon for 4 months now and is awesome, now I’m planning to print an Iron man Armor for my son so do you think that maybe you can make a Video sharing some tricks using the Bambu Lab Printer, that will be great, thanks again for the awesome Videos and tutorials & Take care.

@Hero1117a 7 ай бұрын

Waiting for mine

@Theguys1212 Жыл бұрын

I wanted the Elegoo plus but by the time I had the money they were discontinued and I didn’t have the money for a Elegoo Max so I went with a Sovol SV01. Do you have any recommendations on any upgrades? I am currently using the glass bed it came with but I did get the magnetic setup but I have nothing but issues with my bed level. I wondered if I need new springs or maybe the a bed upgrade??? Any info would help

@maker_matt1023 Жыл бұрын

Bambu Lab is really leading the way forward.

@GenerlAce Жыл бұрын

I do wish the P1P was a little bit quicker when sending from PC, my "extracting 3mf" step is really slow on more complicated prints, and sometimes even simple ones, i usually manually do it from the micro sd, and the camera is kind of meh, both little issues for me are not major, since the prints come out so great. my printer has been going non stop since i got it. I love it!

@FranklyBuilt Жыл бұрын

You can also export as just gcode

@davidfarris1332 11 ай бұрын

Going from my Ender 5 Plus to my Bambu X1 Carbon has been an absolute game changer! However, I'll always have a soft spot for my E5+.

@kadysinger3877 Жыл бұрын

I must have bought mine at the perfect time, i have not had any issues at all with my p1p (and ive been using it non stop for 2 months) only time it ever hasn't worked has been my own fault and coming from an ender 3 where i was always ALWAYS having issues, waiting for parts, doing upgrades, even just the fact if i need to reslice something i have to take the sd card out, put in my pc, then back in.. god its just.. the convenience and reliability and just... knowing it works how its meant to work. I can just press SEND and the p1p does it, i even just added an AMS so it does the filament swaps for me too 😁😁 but now i gotta make my p1p a cute little cube inspired by you.

@matt-8523 3 ай бұрын

If I’m installing the Companion Cube, and building an ventilated enclosure, do you recommend installing; - Chamber Temperature Regulator Fan - Control Board Fan - Auxiliary Part Cooling Fan Please let me know

@Antimatter_Gaming Жыл бұрын

this was my first printer was great did a test print then printed a Mandalorian outfit so good

@_troutfishing_ Жыл бұрын

can you plz link the exact filamet and colors you used for the shell so i can make the smae one i love the color way and how it looks😁👍

@_troutfishing_ Жыл бұрын

*same

@8911145533 Жыл бұрын

The K1 with the updated extruder actually ain't bad. It absolutley rivals the P1P in buildquality and printspeed/printquality. It's quiter as well

@caramelzappa Жыл бұрын

Bambu has done a good job of bringing corexy to the masses. But word of warning: BEST is going to potentially change over time. It's not just about out of the box, it's long term use. Those carbon rods on the gantry wear, and are glued into place. Sending the printer in for a full gantry replacement is the only repair solution. If and when they fail out of warranty you're likely going to have a printer that is too expensive to repair.

@thegps7197 Жыл бұрын

I agree, a ground carbon rod that isn't sealed wasnt the best choice. Seen videos showing that after printing you run your fingers across the rod carbon dust comes off. Didn't realise it was also glued in place. Why didn't they use clamps so they can be easily swapped out.

@danielcoombes3310 Жыл бұрын

Im so glad youre loving it now dude. The bambu printers truly are amazing!! I bought 2 X1C printers and havent looked back since. Ive stil got 2 CR10 printers and i love them but i have hardly touched them since getting these machines. I have to admit though that i really want at least 1 p1p as well just so i can make one of its cool cases😂. I do just want to ask 1 thing, how did you fit a full mando helmet on the print bed? My head isnt that big (well i dont think it is lol) but i couldn't fit my head in the one piece one that i printed...

@hailandsilence1537 Жыл бұрын

I am using puck lights for hands on my iron man suit, which only has 3 lights. I got a five pack of the lights, and I need more wiring to be able to let the battery pack reach into my forearm to hide it from view. Would it be safe to solder the wires from my other three puck lights to lenghten the wire? They are the same ones you used for your MK39 suit

@markalan7537 Жыл бұрын

Can’t wait until I can afford any 3d printer capable of printing an iron man suit. I’m making mine with cardboard and resin lol. I watched one of your videos showing how to motorise the face plate I plan on making the hinges with cardboard and resin as well thanks for sharing everything you do on KZfaq great content that’s very helpful.

@jonahlang2731 Жыл бұрын

5:38 Frank channeling Lin Manuel

@joshbailey4124 Жыл бұрын

I dont remeber changing the speed of my p1p at all. I have 3 walls and im getting mando helmets in 14.5 hours! Theyre immaculate, wouldnt need to start sanding any lower than 120grit. The thing is a monster and well worth the money. Ive had ONE failed print and it was the pre sliced file, since slicing my own, smooth sailing

@jafjay6024 Жыл бұрын

7:11 ironing adds hours onto my Prusas print time! That’s insane!

@FranklyBuilt Жыл бұрын

I know right?

@hattster1818 Жыл бұрын

Looks cool

@MechAero_Labs Жыл бұрын

Much love Mr Frank ❤❤

@DaRealFlipper 11 ай бұрын

Hi frank don’t know if you’ll see this I was wondering if I should get the p1p or p1s I love your videos and want to get into 3-d printing

@GMFootage11 10 ай бұрын

I want to get a p1p but i might save up for a ELEGOO Neptune 3 Max cuz i want to make props and helmets

@jjturner7463 Жыл бұрын

i saw in another video the scraper thing you were talking about is to hold the bed or something

@syifaservice6999 Жыл бұрын

very good guys, if only it wasn't far away, I would order the unit.

@johnhorchler667 11 ай бұрын

But is it Quite 🤔 and do a comparison on the Quite of the 3d you talk about Lol you just talked about but still from now on put in the comparison of how Quite the new and old are thank you and just a thought have a good new month to come.