Bambu Studio View, Walls and Cut tool.

Рет қаралды 6,005

Күн бұрын

Survey results are in and most of you wanted me to cover some basic techniques before moving on the advances stuff. Very quick video today.
So we are covering camera view positions, walls and basic infill and the cut tool.
I think I will release the basic steps, then a project applying those steps.
Boosted audio if the sound is too low. • Bambu Studio View, Wal...
#bambulab #tutorial #3dprinting #diy

Пікірлер: 37

@WoodenCreationz 4 ай бұрын

Great video!!! Ty!

@ashleys3dprintshop 4 ай бұрын

Thank you very much for the watch and comment. 😁

@TWK101 8 ай бұрын

"Fantastic tutorial! 🚀 Clear, concise, and incredibly helpful.

@ashleys3dprintshop 8 ай бұрын

Glad you think so! I hope I am adding enough valuable info without overstating anything or drawing out the length.

@larryspencer9133 8 ай бұрын

Keep up the great work...love your videos, very informative. Thanks

@ashleys3dprintshop 8 ай бұрын

Thank you. I'll keep making if people like watching.

@larryspencer9133 8 ай бұрын

Will for sure. Iv learned a lot. Thanks

@felipefehlberg 7 ай бұрын

Thank you for covering the slicer, there is always something to learn there.

@ashleys3dprintshop 7 ай бұрын

Thanks for the comment. There is so much to cover I didnt want to overload everyone. lol

@obie224 8 ай бұрын

Great video, keep up the good work !

@ashleys3dprintshop 8 ай бұрын

Thank you thank you. 😁

@3Dprint4you 8 ай бұрын

Another great video! Very informative and will definitely be a help to me in getting a hand of bambu slice. Congrats on shooting over 1000 subscribers.

@ashleys3dprintshop 8 ай бұрын

Thank you very much. I couldn't do this without every one.

@stevenbautista2158 8 ай бұрын

Awesome! Thanks for putting together

@ashleys3dprintshop 8 ай бұрын

Thank you for the kind words. There is so much to go over so I'll keep them around a few subjects at a time.

@dennisbohs1778 8 ай бұрын

damn... half throu the vid and already learned lots of stuff i could have put to good use the last half year of working with bambu studio.. THANKS A LOT!!!

@ashleys3dprintshop 8 ай бұрын

Thank you for commenting. 😁

@kidslice2959 3 ай бұрын

I really like your tutorials. One small request: could you raise your volume levels? I have to turn the volume up a lot to hear you then the ads come in like a tornado siren. Keep up the great work!

@ashleys3dprintshop 3 ай бұрын

Thank you very much for the feed back. I have been cranking the sensitivity on my microphone in my later videos. There could be static at the loudest volumes but it may strike a decent balance for most speakers/headphones.

@mitchellbernstein42 5 ай бұрын

Great info. Would you do a tutorial on printing with filaments like ASA and PC. It seems no matter what I preset the temps for it always reverts to a lower temperature and faster speed.

@dsemolian3071 8 ай бұрын

🤘BITCHIN🤘

@ashleys3dprintshop 8 ай бұрын

Let's GOOOO!

@davidstanleyolson 8 ай бұрын

I appreciate your previous videos, but this one feels rushed. Also, the text overlays were difficult to read beacuse of lack of contrast and I could ot read the entirety before it disappeared. Or maybe I am too stoned Again, I watch and enjoy your videos . Just some feeback Thanks😊

@ashleys3dprintshop 8 ай бұрын

¿Porque no los dos? The survey was neck and neck for a bit so I had to postpone the "advanced" video for the basics video. 😅 I have a few more "basics" videos to push through,. I will make better effort to make text readable. Thank you for the feed back.

@universeunknown1880 7 ай бұрын

Tnx very much for the video! P.S. Is it just me or your audio level is very low? I'm watching this on M1 MacBook Pro, all volumes are up and its still very quiet.

@ashleys3dprintshop 7 ай бұрын

I think it is machine dependent. I have a "boosted audio" version but it also boosts any static Thank you for the feed back. kzfaq.info/get/bejne/jsh1mdBkvdDIYX0.html

@BoosmannTV 8 ай бұрын

Our Bambu-Guru 😉 , thanks for this great Basic-Vid!!! Go on and on….the community will grow up to the sky 👍 Best greatings from the „formnext“ in Ffm.

@ashleys3dprintshop 8 ай бұрын

Thanks a ton. I guess I am falling into being a Bambu centric channel. lol. I'll keep making if everyone keeps watching. How was formnext?

@antmax 5 ай бұрын

Cut tool is fine until you have a complex object. I really wish you could scale the cut plane, would be great to slice a body at the shoulders, waist etc and not have it slice through a leg, arm or other sticking out part. As it is, it's only really useful for basic objects. Neat when it works for the application you had in mind though.

@ashleys3dprintshop 5 ай бұрын

Hey hey. Great news. If you have a later version of Bambu studio or Ora slicer selective cuts are available. I made a video about it. Towards the end of this video. kzfaq.info/get/bejne/iK-CaLSbzbfSnXU.htmlsi=txYS8H881AzbAtzO

@antmax 5 ай бұрын

@@ashleys3dprintshop Oh wow. So easy too, can't believe I missed it :D

@ashleys3dprintshop 5 ай бұрын

@@antmax It was added recently from Prusa Slicer. I have been waiting months for it to reach Bambu Studio. 😁

@HellbellyUK 8 ай бұрын

Love the videos, but PLEASE could you sort out the audio. They're usually quiet, but this is borderline unusable (its really low, and all in the left channel).

@ashleys3dprintshop 8 ай бұрын

I think I'll over shoot audio going forward and leave it to you guys to reduce sound on your end. Thank you for the feedback. I'll upload a boosted sound version for you.

@ashleys3dprintshop 8 ай бұрын

Hopefully this helps. Same video with boosted Audio levels. kzfaq.info/get/bejne/jsh1mdBkvdDIYX0.html