But the remote-controlled iceberg on a scale of 1:200 is still missing.

You actually want to get the waterline about a quarter inch BELOW where the red meets the black. That's the 'antifouling line' where the antifouling paint ends, and that red paint is meant to keep barnacles off the side of the ship. Usually the ship would be riding just below that line to account for wake or other disturbances splashing the barnacles up against the side of the ship. If your waterline is RIGHT at the red paint line, there's no protection just above the water.

Nice video. The curvature that you see in the hull and subsequently the superstructure is called sheer. I've found that to minimize the detachable decks warped appearance required sliding it backwards angled just a tad, thereby landing the aft portion of the superstructure 1st followed by the bridge. It keeps that unsightly gap in the back from showing or becoming so pronounced. Also, don't over tighten the center screws or it bends the deck as well. Cheers

I’ve been wanting this for years for my self beautiful ship 🚢

the "rigging" between the masts at the top is the antenna for the wireless morse system

"Still scale speed" *torpedoes through the water doing maneuvers that would kill more passengers with flying furniture than any iceberg ever could, while casually parting the seas and pushing along a wall of water at least 10 meter high* xD

The waterline is a little to high. Aside from that, great model!

Wondering if they ever think about doing our famous great lake ore freighter "Edmund Fitzgerald" that would be my dream to see. Im pretty sure many others.

Thats a beauty!

Ordered mine yesterday! Can’t wait for it to arrive!

Why are the life boats uncovered. Doesn’t it rain in the Atlantic?

I don't care what anyone says, this is freaking awesome!

I have never wanted something more. Just need to save some money now. Lol

Love the detail. Pretty sure the water didn't get that high on the sides when it was underway. May have to buy this just for display.

Awesome model

If someone wants a ready to run 1/200 titanic then i could see this ond being tempting. I would personally just buy the trumpeter kit and convert that to rc. It'd be more work but probably a bit cheaper and it includes lights.

Another orsum detailed Ship. I want her, let’s hope EU store will be back in stock soon. You know I need one James 😉

Wow! I'm sold!

Have you ever seen the 2 part tv miniseries from 1996 with Tim Curry & Catherine Zeta Jones? Still not tired of watching that!

Lets see it sink then

They gotta do Olympic and Britannic as well

Does it come included with a floating iceberg?

I might get this when I save up enough money

Actually should make a larger version, maybe 1/190 or 1/175

The captain you can do whatever you want, better that it didn't come out in the winter time😅

I got a suggestion for a 2.0 version of that ship (if there ever be one) could you add the watertight bulkheads aka big non roof top walls in the bottom, and if possible could you add an iceberg that can float as well as make a small door at the front right bottom side of the ship and make it open and close to let water in? As well as make it all water proof? That would be amazing if you did that!

Awesome! I'll have to purchase one! Thanks for sharing!

Wel uitkijken voor ijsbergen 😊

WOW🚢 titanic 👍

My problem is those screws, the lack of windows in the hull, and NO LIGHTS, also the hull is too thick wich would be unrealistic. I prefer the trumpeter model

Well done you got the funnels right , i see so many great detailed models but they get the funnels wrong , because they go by the james cameron model in the movie and its wrong.

Technically the waterline should be just ever so slightly below the line where the black and red meet like 1-2 millimetres below it

It’s so beautiful just so expensive

6:59 In fact, no one knows how many blades the central propeller had. All available photos are photos of Olympic propellers, not Titanic. It is known that the White Star Line Company experimented with different propellers with different numbers of blades. There are reports of this. The three-blade gave more speed, but also more vibration compared to the four-blade. The central screw of the Titanic is hidden under the soil. The central screw did not have a reverse and worked only in the forward direction. The drive was from a steam turbine using exhaust steam after reciprocating engines (the energy of such steam was still enough to spin the steam turbine). Piston engines drove the side propellers.

Love it ❤

I wish you sold the old Graupner 1:150 scale Titanic!

Is there a 'SINK NOW' switch, on the Remote Control ?

Can you guys do a Bismarck rc battleship review?

Pretty cool

Question, why not add a revs reduction device? Watching Titanic speeding up like a pT boat is quite ridiculous. Otherwise, great job...

I Neeed one!!!

No extra lifeboats then 🙄

no bilge pump considering its the Titanic seems like a good idea

If it comes with a mini submersible I’m in.

hello, this model of the titanic has a smoke effect and a lighting effect, thank you

Maybe stupid idea but why don't replaced these screws with some strong magnets and opening without screwing?

Cool but it should move at half that speed for “fast” for scale

Shes going a little fast for the scale. But bloody great model mate. i Salute ya :)

Your Titanic model is low in the water and off kilter! Meaning she’s leaning toward one side!

The 4 Wing Propeller is wrong. The Titanic had three threewing propellers.

@Motion RC I have a question. Could you buy it already built or you have to build it yourself?

👏🏼 👏🏼 👏🏼

When will this be in stock again? Looking to get one ASAP!

Design flaw; they used unfinished plywood under the superstructure which warps badly and causes excessive sheer (curvature) which looks horrible. The only solution is to drill and glue nuts under the rear deck near the aft part of the superstructure. Drill through the superstructure and deck on top of the main hull so the holes align perfectly. When the nuts are good and dry, screw the aft part of the superstructure down flush. You can heat the bottom of the superstructure with a hairdryer on medium or high heat and it will flatten out so it will be easier to screw down flush. Why they did not add screws to the rear of the superstructure is a good question. Motion didn't have any parts. So I purchased small machine screws and nuts and washers from Home Depot. I glued the nuts to washers before attaching them under the holes drilled in the deck. The washers add extra reinforcement in the area. Maybe overkill but I didn't want any deformities in the deck from warping pressure. Looks much better.

Perfeito!!!!!

Is the Trumpeter 1:200 kit your base model? - the stern screw warning sign is on the wrong side of the railing

This is always unavailable unfortunately...

In terms of accuracy, how does this compare with the 1:200 Trumpeter model?

You missed the most important piece of information about the ship. How much did it cost?

Add some coal as a historically accurate ballast

Does it come with a raft and 2 certain people? Xd

*That's a great Titanic.What a great video! So cool!!!~ I have an RC Titanic!~~~^_^*

I have a burnt out hull of an rc titanic my parents found it in the mud when they were docking the canoe had it for years now I've been temped to put it in resin

Always out of stock. And I never get a notification when back in stock, even though I have both my emails listed.

No lifeboats?? Why am I not surprised. Nice use of Celine Dion though

Nice nice. Does it come with a titan sub too as a bonus

You added a little too much weight there was a little red above the waterline when the ship sailed

I wanna buy one but they’ve been out of stock for months 😭

Are these fine detailed?

is it true this 1/200 scale Titanic has been discontinued ? This is what I'm hearing , the manufacture of all the 1/200 scale has closed up the 1/220 scale line

Now all they need to do is make one that sinks and splits and I will be happy for the rest of my life.

When do you think these will be in stock again ?

there is a fundamental dif between a boat and a ship. titanic is a ship not a boat. a boat when it turns rotates inward like an airplane turning. a ship rotates outward from the turn axis like a truck on the road. hope you learned something. but cool model too bad you cant reduce the viscosity of water by 200x so you get a true wake. its like shes in syrup but its a cool effect. the des. was amazingly hydrodynamic the reason why people just put the ballast in is so it settles as low in the ship as possible. you want the centre of gravity as low as possible making it stable. think about the real ship and where the weight is. what is the heaviest thing in the ship. it was the 2 trip expansion engines. these were mounted mid ship. see if your ballast is in the bow and stern your response will be low because the inertia will be higher in rotation. you basically just want to put a block a steal in the rotation centre of the ship giving you a pivot point or even something heavier like copper. once you have your main ballast in you trim the bow and stern with a little weight as possible to maximize turning performance. you ballast then balance in that order. i hope this helps you in the future. cheers.

Does it come with its own iceberg?

Now get an RC iceberg

Scale model of an iconic ship that sank on a moonless night - without lighting? Bummer.

That’s really cool, could have a lot of fun with this and customisation. 🫡

Does it split in half?

I'm almost certainly wrong about this but I feel like the Titanic might have been more than 200 times bigger than this model. I say that not knowing how big the titanic actually was. Just a hunch.

Now you need an Rc titan sub💀

Damn those are SS United States speeds! Ive got the "other" rc Titanic thats much smaller but illuminated and WAY slower. Would you happen to know if the forecastle and bow have a waterproof deck as well? No way i wouldn't be taking this out during a storm. Mine isn't very watertight.

to bad it does not have lites that would really add to this ship

How does it look at night?

Is the realistic, ship sinking iceberg, sold separately???

Cheesy

I need this, Where did you buy this!

Is that a Trumpeter 1/200 kit? 🎉

Will it be available in Europe?

omg i want it 😭

The windows are not cut out properly on A deck, the super structure decks are painted plastic that clash with the wood veneer stuck on rest of the decks. Those square white boxes hiding the retaining screws look ridiculous and the water line is to high. You would be better off building the 1:200 Trumpter kit with wooden deck extras motorizing it.

It might collide with a swan and sink , thats me 1and half grand at the bottom of the lake.😢

Convert it to run on live steam 😏

You would think for $1400 you would have provided brushless motors ???

These going back in stock soon?

I will buy that with website, did you get it on?

so how much? Websites dont work

Dónde lo venden?

price?

Shame they didn't use bulbous bows back then. Would take away from her beauty though.

And what would this cost?