Banner Installation Stakes and Bungees

No video

Banner Installation Stakes and Bungees

Рет қаралды 82,697

Rocket Banner

Күн бұрын

Installing a banner at a remote site using stakes and bungess

Пікірлер: 24

@MakaelaAvery 10 ай бұрын

Thank you!! Your instruction delivery was straight forward and easy to understand. I work in field marketing and really appreciate you helping me learn this new skill to make work life easier!

@VaCowboy08 Жыл бұрын

I would recommend using a fence post driver over a hammer. My neighbor let me borrow his and it got the job done in seconds. Also, this video is several years old so the prices he listed are a lot lower than what they are currently.

@taniavanbever355 4 жыл бұрын

Clear instructions and list of materials - worked like a charm!

@waholt 6 жыл бұрын

Good job and good video. I had to do this the other day for high school marching band banners. The only thing I changed was making some zip-ties into little loops to use in place of the quick links because the quick links here costs right under $3 each.

@andylefebvre8947 6 жыл бұрын

Method worked great. My banner had only 4 grommets and was installed on a windy day. Banner stayed tight and straight.

@minmintkhuttikum1180 Жыл бұрын

Thank you so much for sharing this tutorial. It’s working very well.

@hlantz411 3 жыл бұрын

Perfect for my needs. Worked perfectly !! Thanks

@Carlos-of1uq 3 жыл бұрын

Worked like a charm.... THANKS!!!!!!

@pastoreric8283 2 жыл бұрын

Great video. Very helpful. Thanks!

@Rocketbanner123 10 жыл бұрын

Banner Installation using Stakes and Bungees for Short Term Outdoor Use.

@brandonsimon254 2 ай бұрын

Perfect video

@faridbehbahani7442 5 ай бұрын

Thank you it was helpful 🙏🙏🙏

@captainstress 4 жыл бұрын

Thank you. This helped me a lot!

@lizc.8406 5 ай бұрын

Wish I could upload photo just used this video- 15mph winds didn’t even make it waiver

@whitneymoore4507 10 ай бұрын

Great video!

@sheikhselim2312 Жыл бұрын

Remember when T-posts were that cheap? If only they were this cheap again!

@ttaylor6808 7 жыл бұрын

How do you get the gosh darn things out after you are done though...that's been my delima. They have actually broken off trying to get them out of the ground.

@sheikhselim2312 Жыл бұрын

There's a easy technique, you use a T-post driver, stick it underneath one of the points that stick out of the t-post, and with the driver in a diagonal, the opening end upwards on the point, and the top end of the driver downwards on the ground, you pull up the t-post. There's a video that shows it online; kzfaq.info/get/bejne/n5x9q5uisq-nZYU.html. Even though this reply is years later, hope it brings enlightenment to someone.