Greetings from Germany, partice I watched all your movies. Such an amazing entertainment. Can't imagine your effort for all this. Getting everytime such professionals to cooperate with you. Missed Eric Gonthier in the movie, cause I like his explaining but anyway such a great work of Art and Sophistication.

Stunned ... No words, 18:40 --> (19:21)

It is Refreshing to listen to young Academics Exploring this Ancient subject, ,without the so common "Mainstream Academic" limitations. The Following is : Description, Defining, Discernment, rather than Judgemental. "Mainstream Academia" resist Freedom of Thought, due to their "19th Century Theory based Paradigm and Linear Timeline", used as a factual Foundation and as (a tool of measure, any content, theory, findings, artifact, Oral or Written History that doesn't fit or support their Paradigm is rejected, discarded, ignored, and/or ridiculed.) This clearly does not meet the practice of the "Standards of Science and Research" which prohibits using a Theory as Fact. The "Standards of Science and Research" (in summary) instructs the Academic/Researcher to "With mind fully Open free of any predetermined Beliefs, Theories, Opinions, and allowing the Research Methodologies to extract the greater facts." Academics were once instructed in the practice of being: "Conscious in Thought" + " Applying Higher Mind" (Where all our Positive Thought Energies and Wisdom reside.) "Higher Mind aka Mature Mind" A practice I recommend for those preparing to run for and hold Political Office, particularly the Office of the US President. The Young Minds, are far more Independent, have a keener strength of "Critical Thought/Thinking,", and are over-done with Limited, Fear bsded Thought Ideologies and Opinion Commentaries. Many define "Mainstream Academia" as "Mainstream Academic Dogmatic Orthodoxy" due to the obvious "Belief Factor". True Higher trained Academics comprehend the Value of: personal Freedom of Thoughts, adhering to the "Standards of Science and Research*, and yhe 0ract8ce of ,"Conscious Thought + Higher Mind" aka Mature Mind. Note: the vast Genetics/DNA studies are the fact based findings that are helping to unseat the "Old Limited MS Paradigm". They are Probing Global movement/Seafaring far earlier and more frequently, than Mainstream will admit. When a Professional Academic ignore "Peer Reviewed and Journal Published Science Findings" becausr it doesnt support their Theory Paradigm and Linear Timeline, then they have not understood the Ethical Standards that are required in Academia and particularly 8n Research. It is Time to Audit yhe Entire History Stories and Apply the Standards. Be Free in evey aspect ... and particularly in Your Thoughts. Beth Bartlett Sociologist/Behavioralist and Historian USA

It is Refreshing to listen to young Academics Exploring this Ancient subject, ,without the so common "Mainstream Academic" limitations. The Following is : Description, Defining, Discernment, rather than Judgemental. "Mainstream Academia" resist Freedom of Thought, due to their "19th Century Theory based Paradigm and Linear Timeline", used as a factual Foundation and as (a tool of measure, any content, theory, findings, artifact, Oral or Written History that doesn't fit or support their Paradigm is rejected, discarded, ignored, and/or ridiculed.) This clearly does not meet the practice of the "Standards of Science and Research" which prohibits using a Theory as Fact. The "Standards of Science and Research" (in summary) instructs the Academic/Researcher to "With mind fully Open free of any predetermined Beliefs, Theories, Opinions, and allowing the Research Methodologies to extract the greater facts." Academics were once instructed in the practice of being: "Conscious in Thought" + " Applying Higher Mind" (Where all our Positive Thought Energies and Wisdom reside.) "Higher Mind aka Mature Mind" A practice I recommend for those preparing to run for and hold Political Office, particularly the Office of the US President. The Young Minds, are far more Independent, have a keener strength of "Critical Thought/Thinking,", and are over-done with Limited, Fear bsded Thought Ideologies and Opinion Commentaries. Many define "Mainstream Academia" as "Mainstream Academic Dogmatic Orthodoxy" due to the obvious "Belief Factor". True Higher trained Academics comprehend the Value of: personal Freedom of Thoughts, adhering to the "Standards of Science and Research*, and yhe 0ract8ce of ,"Conscious Thought + Higher Mind" aka Mature Mind. Note: the vast Genetics/DNA studies are the fact based findings that are helping to unseat the "Old Limited MS Paradigm". They are Probing Global movement/Seafaring far earlier and more frequently, than Mainstream will admit. When a Professional Academic ignore "Peer Reviewed and Journal Published Science Findings" becausr it doesnt support their Theory Paradigm and Linear Timeline, then they have not understood the Ethical Standards that are required in Academia and particularly 8n Research. It is Time to Audit yhe Entire History Stories and Apply the Standards. Be Free in evey aspect ... and particularly in Your Thoughts. Beth Bartlett Sociologist/Behavioralist and Historian USA

...

I thought a sound/energy healing chamber as well. But also, there was one with a "just started chamber entrance" inside it which I thought strongly resembles a linga, as if it was cut out of it, which made me wonder if the chambers were used for attempting to consecrate.

I would not exclude humans. If you look ancient traditions and text (mythology or their history) all of it points to the same story and school of thoughts. Nowadays it seems crazy that Mexico, India, and Greece or Iran have the same story telling, but once it was pangea. At at certain point there was a flood and all was lost, this part of the story is also shared. And even after that, until the jewish version of bible, Greeks and what not were sharing the same stories. Some research shows how the bible we got nowdays took those stories and change the female deity to a male God, and decided to refuse chaos and magic, instead of accepting and cohexisting with what is beyond the rational. Jesus Christ is much closer to the ancient traditions than to the new "old Testament" But anyway, everytbing points toward a very advanced civs pre-dating us. I don't understand where the idea that we are the pinnacle of evolution is coming floor. For once, the lack of evidence of something (referring to ancient more advanced civs) doesn't prove the lack of existence of something. Moreover, around the globe is full of incredible buildings and stuff. Ancient Indian writings talk about stuff that are being re-discovered now in science.. We are so advanced that we build concrete that breaks down our kneee and to solve that we need to build shoes.. We create problems just to SELL solutions.. People are happy for synthetic drugs needed bc of bad food instead of staying healthy moving around and using organic food and focusing on better stuff than ego.. We are not advanced maybe, but it is also true that if there is a human tribe who is advanced, they do not think about war. The human tribe who is not advanced, is governed by ego and craves power, and kills the advanced ones..

Maybe it was made by special needs people who are from Uranus

Made in France 👍🏻

@@bug.id9340 yeah I wish they’d do more. Very well done, and hard to argue all of the evidence because it’s put together so well with so many qualified people.

Agreed. Instant sub!

except, there around 200,000 yrs too young..

The lost knowledge is beyond unfortunate, and the burning of access to all that knowledge is beyond criminal. My hope is that what goes around, comes around given that we live in a cyclical universe.

That remains the greatest loss of Indian civilization along with losing taxilla, vikramshila, odantpuri universities.

@@DAB009 💯 brother. What a shameful generation to live in where all our ancestral knowledge has been destroyed by invaders, while no one seems to care even today.

The Hindi version will be released next week… please help us to spread it 🙏

That’s very sad

Needed to go more into the acoustics, and hrtz that you get. As these are what can promote changes in your human vibration

@@murdock6450 The dome-shaped chamber must have an astonishing acoustic. Have you ever been in a telescope-dome? The ocular is more or less in the focus of the dome, and while it's main purpose is to watch the stars through the telescope, the acoustic there is almost as impressive. You can hear every slightest whisper anywhere in the room.

@@Nachtschicht1 Sounds amazing i shall look into this. Thanks.

@@murdock6450 all the ancients seem to use acoustic tech. wonder if they figured out a way to manipulate geometry with just their voice. chanting being used in ancient times was talked about having power. But quantim effects would let acustics turn into light for exmple. We need to map out the super structres

Academia is much more open-minded and advanced than the Prehistoric Fiction authors such as Graham Hancock, who will never give up on his utterly disproven 'One World Master Race/Civilisation/Culture' BS.. He literally pushes Nnaazzii propaganda to the masses for profit!.. Indians do it to I've noticed. It's like just because Whyte's white-washed history up until the latter 20th century doesn't mean India-washing, China-washing, black-washing is any better. So many exaggerated claims, and 'ancient technology'. When they do actually come up with some 'advanced tech.' it's ridiculously advanced with no or poor evidence. Simple tools, time and effort, and in this case a pivoting pole (or 2) to ensure the ceiling is nice an symmetrical.. sand a cloth + boards for polishing. same-sized = cast bronze or iron chisels. Impure copper works OK too.

They are lying to us. There was something in the past.....

I was thinking the same while watching this.

One day I was pondering how they (Egypt)could have accomplished the precision, and scale of the structures. I thought about how they possibly could have accomplished these feats with the technology stated by the mainstream,and any other materials we know for sure they had available..I came up with two ideas that I have yet to hear discussed... Water,Wind/air....

You are missing the emphasis on sound.

​@@GM-cq6ezagree, probably the most important of all!

They are quite simple. Just needs workers with simple tools. Polished using rock and/or sand. Clearly just a quality finish using standard techniques known for 1000s or 10s or 1000s of years of making posh caves for both the living and dead. The inscriptions are a little dubious though. May have been added later by those claiming the caves for their tribe. I don't even think they needed metal tools, but bronze may have helped. Cave architecture and advanced carving are not as sophisticated as building using stone blocks and parts fitted together.

@@PrivateSi Utter satire, or uneducated. For starters, did you even watch the video?

@@ChrisWashburn .. Yes, and I've researched the site. The unfinished grotto clearly proves I'm correct. Same for all the unfinished versions of amazing, skill, hand-crafted spaces and objects by those with a great eye. Obsidian and Flint cuts granite better than bronze but they do seem to have regular chisel marks so bronze tools were probably used. Which parts do you think were made by Ancient Machines / Aliens or whatever crazy nonsense you believe? They all look well hand-crafted to me. They were using the same tools up until a few hundred years ago all over the world. Check out all the Medieval efforts made in the last 1000 years, let alone Ancient Greek marble etc.

@PrivateSi ok, but this not explaining the need for this level of precision, the symmetries, the volumes of the shapes coordinated, and this specific frequency of 34,4 Hz…. And look again the part dedicated to this unfinished cave, there is more to understand

@@JAYANFILMS_BAMINVESTIGATIONS .. Nothing that hasn't been seen elsewhere for 1000s of years. Structures we know were not created via machines.. Not to say they didn't have measuring rope, wooden guide rigs, platforms etc.. The basics. -- They may have used a few slightly more advanced hand tools such as bronze stone saws using sand to do most of the actual cutting once the groove has been started. How would a machine be useful here? -- A curved roof just needs a length of wood pivoting left and right along a centre line from front to back of the cave, to act as a guide. Then it's just hand polished. Very little skill required compared to sculpting a human statue out of a solid block. You need decent knowledge just to choose a suitable block that isn't likely to crack.

thsi has noth9ing to do with it..hwo coem these vids attract so many daft people?

This has nothing to do with your god!!

@@strangetrip837get over yourself. He was simply noting the similarities in an old text.

@@strangetrip837 Man. You have some anger issues dude. Go outside and touch some grass.

@@strangetrip837😵‍💫

My thoughts exactly

Probably that was made already.

I second this suggestion, still curious as to who could have made this and at what point. The 'how' would go a long way to shed light on that.

We get to see them like that because we see no practical purpose for them... But why build more than one?

@@jeffmckinnon5842Maybe there was plenty of food and men just could and did so they could work. There must have been a point to them and that is sadly lost to history. It is sad that the megalithic society hardly left any trace at all.

How interesting!

Random shit that means nothing. What about mars? What about Saturn and Jupiter? And what about the fact that Neptune is invisible to the naked eye? I think you just pulled these numbers outta Uranus!😂

Yeah, there is also a Russian channel of a girl who repeated the vase using only primitive tools, took her 7 months. Q

tbh, the vases aren't nearly as impressive as large spaces like this or the pyramids. lathes aren't that advanced a machine and aren't beyond ancient humans' ability... Neanderthals made needles (requiring a small eye be drilled) from bone afterall and early humans made beads requiring a relatively highspeed drill. spinning the tool vs spinning the piece isn't a huge leap and having lots of time on one's hands leads to a plethora of innovation and clever developments. obtaining 0.001" precision isn't terribly difficult either if precision is the goal (rather than strict functionality, "good enough") for such small pieces compared to large internal chambers. their knowledge of minerals was impressive so I'm sure they knew diamonds make for an excellent cutting tool.

@@john-ic5pz This is not about lathes. precision is not the main goal, but the signature of the masters. the purpose of the product is unknown, only our projections and expectations. comparing this vase to the needles of nyanderthals is like comparing a flint spear to a space x rocket - incorrect and speculative. i suggest you read the mathematical analysis of the vase's construction and think again about your simplifications. --- unsigned io articles 2023_03_17_Abstractions_Set_In_Granite

@@john-ic5pz underrated comment.

@@acatrio. That went over your head, and all the puffing and fancy words to sound clever, didn't make it so. Comparing a flint spear to a space x rocket is the biggest exaggeration to rebuttal I've ever heard of, especially regarding needles by your ancestors the Neanderthals, who also gave you that flint-spear to a space rocket lol..what the heck. Those vases even at the ones showing "signature of the masters"; really isnt that hard to master. That's why they were literally manufacturing these like a factory. Cutting into Granite, removing the internal rock to make cavities to actually start shaping (we are talking about f*ing GRANITE here) the cavities into geometric-rooms, and then precisely doing so at a TRUE MASTER CALIBRE level, is comparable to shooting rockets into space...I'm no rocket scientist, but we are manufacturing those globally since the 60s, ain't no one replicating or mass manufacturing what we see in this video and other sites around the world (China, Egypt etc.). Ignorance is bliss.

None i see spends any time to question who were theese ancient builders, here i see that theese structures were build using 3D technology, no hand has touched this granite, that was done by 3D machine, human hand can not match this accuracy, it has to be a structure 12.000 years plus ,,, the lost world wide sivilisation,, precataclysmic,,,nothing to do with indians or asians,, or egyptians,,, this is a highly advanced technology,,,to cut granite like butter it had to be laser and only laser,,, nothing else,,,

I agree.

You are looking at them through our eyes and with our technology, you need to look into alchemy, plasma, ball lightning, frequency and fractal toroidal moments. Bob greenyers o day videos are a theory he has based on real science with repeatable experiments, he then combines this with a lost ancient technology, symbols hieroglyphs and esoteric knowledge that's been passed down and is literally all around us, his theory is literally unbelievable but at the same time believeable. He has a theory on what the great pyramid is and it's the best one I've seen, between himself and malcolm bendell, who is an inventor, it's going to change the world

az őseim...Szkíták, Magyarok, Hunok...

Aryans

@@noelmwavu9838 Not aryans...a delusion

@@noelmwavu9838racist

I thought it was her ❤ Brilliant documentary 😍

I totally agree, each point raised worthy of further investigation!

Check out Paul Cook - he’s cracked it… they were not cut but poured with an ancient geopolymer technology - this goes for many ancient sites… and they were energy devices, as within the polymers metals & crystals create different effects…. Now when I watch these I’m amazed how we didn’t figure that out before - but once you see it you can’t unsee it… so much false / deliberate falsified history to impoverish us of healing & other technology

Using hemp coaxial string, a cutting edge could be calculated from a center axil as well as a sphere from a point.

​@@Yestradamus-. Yes, for concave cuts where that center is accessible. But some of the curves had centres located beyond the caverns in solid rock. And a string won't work for the convex cuts.

@@scottgarriott3884 … imagine a LASER. A tight “string” of light. After all, a LASER was used to generate these “maps” of theses “caves”.

Did it resonate with Ohm? What did u experience?

@@akusav333 Aum, indeed.

@@akusav333 Ohm.. Resistance is futile.

You are lucky enough to be able to visit these wonders ;-)

yes very lucky :)

Jahannah James narrating this one. coincidence

No one asked

@@silverback1243 thankyou for asking nothing

no machines used, caves were made out of clay then melted granite poured over them, the granite was melted using a giant lens. ( magnifying glass). when the granite cooled the clay was removed from inside.

​@@thekiltedcarnivoreso you reckon that whole granite hill " whaleback"was poured just to form those 4 small caves?

@@taleandclawrock2606 yes. this was the only way possible to get the results they have in the caves.

@@thekiltedcarnivore I didn’t know melting Granite was possible in 300 CE. How could they have melted the granite? This does make some sense, but what about the circles at the top of the dome?

it is not kzfaq.info/get/bejne/pdRmipqhmd7HlJs.html you people should get some real education.

Thanks

I had similar thoughts.

I don’t know tbh. I’m a stonemason for last 35 years. Flown all over the world on heritage site restoration. There are polishing methods with different courses of clay/mud. Granite against granite will eventually get it down polish ready. As for the symmetry a non stretch string with a point on the end fixed in a central position could achieve it. If this is your sole job day in day out anything is possible.

I carved monuments from granite and marble 🪦

We don’t speak about high technology, but different technologies

@@JAYANFILMS_BAMINVESTIGATIONS yes most people I have seen think that our ancestors were primitive and unable to make such wonderful things. The Egyptians had squares and a level system, not as advanced as ours and we can see how well it worked for them. Myself I use various grits of sand and a sandblaster, a horde of chisels, grinders etc.

@@dougcharles5004 you ain't building shit with your string. 66% of data points out of 350 million are within a 2.5 mm margin. You don't know what that means if you think some string will do it. Been in stone and construction my whole life. Just level the floor without a level over and over is insane. Nevermind getting two walls that run for 10 meters both angled at 87.5 degrees. Where do you get that angle? How do you get 87.5 degrees on both sides without a lazer or a calibrated square...

to be followed.... aaaaahhhhhh!!

God used his voice and spoke everything into existence. We cured cancer sometime ago with sound and he could walk again and he went home. My family has been Mason's for several generations. You need a surface like that to clean so during surgery everything is sterile. They were being taught medicine?

Exactly, those two BAM&UnchartedX are the one channels that blew my mind lately! The precision is simply just incredible. And the measurements speak for themselves. And maybe the most incredible is it took us humans thousands of years to realize all of this... We're so stupid haha

yes 2:00:20 , watch the screen bro. Although I agree they should have included the info in the description too (and english translated, but I guess AI can do it for you easily now !)

Cost obviously had no relevance in this endeavor, timeless ness along wirh skill , patience and devotion to task.

@@westho7314 Normally that goes for something grandiose or spectacular or beautiful if some king wanted to impress others or leave a legacy. Then money was no problem. But in none of those cases such extreme precision is required or needed. Not even close. This over the top precision was required for a very important function. What that function was? We don't know yet.

​@@faster6329they are clearly masturbation chambers. Go in, jack off in precise darkness, vacate cave, bake some naan bread.

To me the Barabar caves appears to be a creation for sound meditation, as studies have shown that sound meditation can influence brain waves, leading to more profound relaxation and heightened awareness.

@@JasonMullavey Makes sense. To this day, people spend a lot of time and effort on getting good sound.

@wayofages, David Lean didn't interpret anything. He adapted E.M. Forster's great novel "A Passage To India". The mystery of the Marabar Caves is the spiritual center of the novel. But Forster didn't conceive his caves as echo chambers at all. There was no conventional echo in Forster's caves. No matter what kind of sound was directed into the caves, everything came back as a "boom"! Forster described a very nihilistic and frightening experience - as if the answer to the all-important question of the meaning of life, the universe and everything else wasn't "42" as Douglas Adams has famously told us, but simply a resounding and somewhat menacing "boom". This dispiriting experience led to a complete spiritual breakdown of one of the main characters of the novel, Mrs. Moore.

@@sabineb.5616 Thanks for your insights. I didn’t read the book, so I only have the movie to go on. In the movie, the Brahmin played by Alec Guinness understood every event and every other player as gears in a cosmic machinery working to redeem the young doctor’s career even before it was ruined. The caves and their echoes played a key part of that machinery, which to me made them look spiritual - in a cold, dark way as you noted, but spiritual in the grand scheme of things as revealed to us by the perceptions of the Brahmin.

@@wayofages184 , thanks for answering 😀 I really like David Lean's movie, and you described Alec Guiness's character as he comes across in the movie, correctly. The book is a bit more complicated, and EM Forster has introduced several characters whose spirituality is important for the novel. But that doesn't imply that they are right! And that might be the reason why Forster choose to leave the mystery of the Marabar Caves unsolved. Forster himself said :"I don't know what happened in the caves." And the forceful but discouraging "boom" effect which Forster described, doesn't provide much of an answer either. I guess that Forster wanted to say that we must continue to search for answers - and it's possible that our search might never end. An aside: isn't it crazy that David Lean cast Alec Guiness twice in "brown-face" roles which would be given to indigenous actors today? In "Lawrence Of Arabia" Alec Guiness played the historical Arab leader Prince Faisal, and in "A Passage To India" he played an Indian Brahmin. While Alec Guiness is always good, I find David Lean's casting decision puzzling as far as "A Passage To India" is concerned. While there might not have been so many accomplished Arab actors at the beginning of the 1960s, APTI was made 20 years later, and there were a plethora of accomplished Indian actors available! Maybe, David Lean felt that he needed a big star in his movie. Anyway, Alec Guiness comes across differently and more rational than EM Forster's character in the novel. It doesn't feel quite right, and it has been criticized. Anyway, I can recommend reading the novel. I have read it more than once - maybe because I always hoped to solve the mystery of the Marabar Caves - but I never did, and at times I was quite mad at Forster! He was the author! He must've known what had happened to Adela Quested in that darn cave! But I remember that Forster supplied a few round-about answers: Forster believed that his protagonist Dr. Aziz was innocent. He probably didn't attack Adela Quested. But Forster also implied that Adela Quested didn't lie deliberately. And since she didn't believe in a supernatural force, she concluded that Dr. Aziz must have been the culprit. But both characters took their real-life problems into that cave - and while there might not have been a conventional echo effect, something might've manifested itself which caused Adela to believe that she had been attacked. While the Barabar Caves might've inspired Forster, his fictional Marabar Caves with their "boom" sound effects are quite different.

on a tiny scale

@@westho7314 tolerance Vs scale and tooling.

Aziz light! Fresh air and avoiding silicosis are another challenge.

@jamesan2517 The planet is programmed to self clean cyclically; then it gets reseeded. Just like a washing machine, the rinse cycle is coming due.

Excellent evaluation of the circumstances surrounding our existence. What degree of primitive and for what percent of the population would be all I argue with.

Everything on the planet is cyclical, including an occasional deep clean. We’re on schedule for a world wide rinse cycle very shortly. When you see billionaires racing to get into the sky as well as underground, you know the jig is almost up.

@halifaxpeacock eyes open, no fear, S0

I was thinking the same, that the serapeum box builders had something to do with this.

Thank you for your clear description of the “why” of these chambers. Healing. Vibration.💚

All this sound thing is just nonsense.

@@xXturbo86Xx You're welcome to remain ignorant and arogant about things you dont know about, simpleton. Laughing at you.

@@xXturbo86Xx "All this sound thing is just nonsense." Why do you say that, do you believe they were just "Rain Shelters"? I consider the acoustics to be of primary importance in the design. Chanting has always been a part of religious experience, right up to and including cathedrals.