Uploading at 10:15pm EST on a Sunday? Algorithm be damned lol.

$300 is just too much going to wait for Titan to rip it off.

Titant fitness need to body these an make em affordable for everyone

Cost is too high in my opinion and I would compare these to a Deadlift jack. While it is convenient, it’s highly unnecessary for most people in the home gym scene. My urge for new toys is also strong and, at times, does win.

Sorry B ..... you lost me at $ 300 ...... I wondering why took so long to say how much they cost , could of saved me 10 mins ... JK 🤙🏽

@7:37 😆😆😆 brandon you never fail to make me smirk. lol great video!!!!

$300 to solve a problem 99% of lifters didn't even know they had until someone mentioned it. I've been lifting for 25+ years and honestly can't think of one time where I couldn't center the weight while using normal J-cups. This product shows how good we have it. I remember when home gyms were really crappy with concrete weight sets. Now we have such nice equipment available, we're making stuff up we don't really need. What a time to be alive!

Brandon, I frequently travel to the Anvil Gym where all of the ghost strong equipment is used and originated. All of their equipment is the best I have ever used or seen. Everything is rock solid and the finish is to the highest degree. Hopefully people get past the cost point and support this company. The equipment will be around longer than the lifters lifetime!

Thanks for the review! These are things that you don't think you need, but once you have them, you love them (kinda like a deadlift jack). I have a set from Connor & while not cheap (not $300 either), I never want to use regular J-hooks again. Only downside I have noticed & not sure if you've had these w/ the Ghost cups. The contact patch on the bar is slightly smaller & if you are loading/unloading too many plates on one side vs the other, the lighter side may raise up (if the bar isn't centered in the rack). Not that I make it a practice to do that, but sometimes it happens. I actually broke one of Connor's j-cups when the bar slammed back down (I was training w/ a couple younger guys & didnt realize they were loading too many plates on one side.). Anyway, he made me a new one & no problems since.

Thanks for the video! Those Ghoststrong roller cups are $$$! Love the t-shirt!

The Official Brandon Campbell Diamond Cup Rollers or *“Diamond Cup Rollers!”* ...it has a nice tone to it too‼️

Just watched a video about something I could make in the length of the video. I like your reivews Brandon so I will give you the view. Strange that Rogue havent released any yet, considering the made the combo rack now. Not alot of design to get that roller system over to a rack 🤔

Great review. Do you think these would work for a duffalo bar? I squat mainly with that and I’m always running into the bar getting shifted one way or the other. Thanks man

I will seriously consider purchasing these for my RML if they fix the loose fit to the rack issue you highlight at the end of the video. That would drive me crazy. How do you like the grove that essentially pulls the bar away from the edge? If you drive into the bar / rack to wedge it into your back do you feel the bar slide out of the roller groove?

Guess I'm lucky to have the BoS rack. Rollers come with it as part of the rack package. I mostly use them for OHP.

Do you think these would keep a Duffalo bar centered? Mine shifts to the side every time I rack it in my Rogue sandwich j cups and I constantly have to re center it.

For Canadians reading this, Irwin fitness has some roller j cups similar to Ghost's. Pricing is similar but in Canadian dollars and no duty fees.

Keep rollin’ rollin’ rollin’ - Fred Durst

I almost spit my coffee out at the size & girth comment.

How much are the rollers themselves to replace if purchasing the composite rollers? And how often do you think they need to be replaced?

Nice review. I rarely re rack even but have never seen these in Oz. Would be pricey to get them here.

Easily the most comprehensive review on the J-CUP & Ghost Strong LISTENED... Their 2.0 is UHMW lined/hugs the rack, etc... Great review!

Do you miss having the Westside hole spacing on your new rack?

Good info...great idea...

Would love a 2.0 review! Thanks man!

@Basement. Brandon thinking about ordering a pair of Rogue Monster Lite Sandwich Jcups for my RM3 rack. Will I run into any fit issues?

Can we use cerakote barbells on these type of j cups? I mean will there be any damage on the coating of the bar? The same have been launched by a company here in Delhi.

I feel like I could make a pair of these for $50 in my basement. Wouldn't look as pretty but it would serve the same function.

I specifically bought the monster lite rack because the accessories are a lot cheaper than the monster racks.

Ya im Canadian. So its 425$ or 530$ CAD before shipping... WOW

Damn, only 3" x 3". I just ordered the Titan X2. I guess I'll have to wait for them to make a 2"x2" version. I like 2"X2" more, guess this is the only time I'll ever say I prefer smaller 😂.

Rogue will come out with a version for cheaper soon. Hopefully as aesthetically pleasing (though, imo rogue has a long way to go on the aesthetics of some of their products) as these too.

That’s a neat j roller. Very inspiring to fabricate at home.

Sick thx man !

Hmmmm... someone now needs to create a roller-kit (that can bolt onto either the Rogue or Titan Monolift attachments) using their respective existing UHMW mount points.

Great review 👌

I'll just keep lifting in my homemade power rack with bolts for bar pins. It's worked pretty well for the last 20 years. You don't need anything fancy to lift, just lift. A rock will do.

Can I buy these for a Texas Strength Systems squat stand?

I ended up getting theses over the rogue monster lite j cup sandwich because it's never in stock.

Hmm my gym has roller cups but they don't look like any of the ones in this vid. I'd check what brand but well Corona

Excellent videos

Rogue bought Ghost Strong and you can get them for $225 for textured black metal and composite roller instead of stainless metal (unnecessary) and they are better designed than the 2.0 ghost strong because they have UHMW on the front of the hook. Ships in 4-6 weeks.

Wish Rogue made them for my R3

I need this! Edit..... 375 is a hard pass at least till there is a sale. I'd probably by for around 170-200

The guys at ghost are fucking killing it!!

I asked you about these on instagram awhile back these are awesome but the cost is a big letdown. It is more of an icing on the cake piece and will buy it if and only if I have the extra cash and income

Hello, Brandon. This may be the stupidest question ever, but so be it. Are store bought egg whites (Like cartoned or something) the same as just me separating the yolk and the whites from a regular egg? Thanks. Again, sorry bout this lol, its embarrassing

Spoiler 5:57 I see those 6 shooters. My comment on your plates video I was like ivanko ez or rogue six shooters.can't wait to see what you think of them.

I was curious why you never further pursued your roller cops. Next time you have an idea that you want to develop bring it to me in will make a quality product to gather and put it on the market

Glad I got a combo rack now lol

This would be great at a box gym. I’ve seen these on line and was wondering what for thanks

Pretty sweet.

Last thing I'm concerned about for my home gym. Especially for the cost ! Ridiculous !!!

Dear titan.fitness, Copy please Thank you

For $300 ...I’d seriously consider them if they had the UHMW on the inside protecting the rack and allowing the better fit.

Hmmmm, what are those plates I see =D.

7:30 😂

I dont think I could own a 3x3 rack. 2 inch is way less frustrating to lift in

3:18 hundreds and hundreds of pounds.. hahahahahaha

Dat shirt doh

Don't mind me over here just livin that 2x3 life not gettin anything

My ex had too much slack in her cup too.

im still thinking Ghost just puts their logo on stuff

I'Ll tAkE ThERe eNtIrE STaLk!

Rae Crowther used to offer these on their racks, years ago. Unfortunately, they only fit their racks and are not currently produced. The j-cup was constructed with a valley or "V" design which also returned the bar to the same position, each time. In my opinion, if you're misracking that poorly, each time, you need to work on both your precision & accuracy of your walkout or unrack when squatting/benching. If you can't adjust the bar to center it, why are you training to lifting weights. I'd rather buy a second bar (specialty bar specifically) to get even stronger as that's a better use of money. I can't wait to see how Rogue rips off Ghost. If it happens in 2020, well, I'll laugh.

what happened to your really neat basement gym

300 bucks. HAHAHAHAHHAHA

Nice but really unnessesary...good to spoil yourself but it's getting far away from the basics. Always a new gadget available...

Anyone else randomly get recommended this ?

yikes . lost me at the first . Really wanted these. I follow walker on fb and watch his videos but man I work at krispy Kreme. I make the donuts and make 350 a week. mondays fucking suck because all the health care workers make is impossible to just park ... Yeah man fuck that price so hard such a waste of time

Its all about the look of surprise when they first see the SIZE and GIRTH. Sadly its a face I don’t see often.

maybe someone has stolen your idea. mhhh.

300 for fancy jay cups. If you’re too finicky about where your bar placement is and you’re too lazy to shift the bar on your own and you need it to be easy for you chances are you shouldn’t be in a gym. Lol gear for the lazy and stupid

Never even heard of such a thing, nor do I think anyone truly needs these. Just roll the bar with your hands as you pull/push the bar in the rack. This guy is a joke