Basic Maintenance / Oil Change | Guide

No video

Basic Maintenance / Oil Change | Guide | Honda CB650R

Рет қаралды 10,830

Күн бұрын

In this video I'll show you all the necessary steps to complete your motorcycle's basic oil maintenance at home. These steps are based on the information available in the CB's service and repair manual. Even though I am not a mechanic at all, these steps are really simple, and anyone should be able to execute them without any issues.
Any questions? Feel free to leave a comment, I'll reply as fast as I can.
Products:
Engine oil (Liqui Moly 10W40 Street): moto.autodoc.c...
Oil filter (Hiflo Filtro HF204): moto.autodoc.c...
Aluminum drain plug washer: www.autodoc.co...
Special tools:
Oil filter spanner: www.autodoc.co...
Camera:
Canon EOS 90D
Motorcycle:
Honda CB650R (2020 | Euro 4)
Accessories:
Puig levers 3.0 (short)
Barracuda sliders
Small windshield ( • Honda CB650R | Guide |... )
Interphone USB adapter ( • USB Adapter Installati... )
Quadlock Handlebar Mount PRO
Radiator guard ( • Radiator Guard Install... )

Пікірлер: 42

@ChillMotoRides Жыл бұрын

To anyone wondering, I had to reupload this video as I found some mistakes after it was published. I always try my best to deliver the best quality I possibly can, but I am still new to content creation and sometimes mistakes happen 😅. I am sorry for any inconvenience and I hope you enjoy and learn from this video. ✌

@JoaoPaulo-os5jl 8 ай бұрын

I think the next content could be about sprocket changes and their ratios, keep up the good work

@ChillMotoRides 8 ай бұрын

Thanks a lot for the feedback Joao. I will certanly make a video about that topic, as soon as I need to change my own sprockets and chain. ✌️

@catycvo Жыл бұрын

So usefull!! Thank you so much!

@ChillMotoRides Жыл бұрын

Thank you so much, glad you enjoyed it 😅✌

@Deuxiit 2 ай бұрын

Good video!

@ChillMotoRides Ай бұрын

Glad you enjoyed it ✌

@JT7POV 9 ай бұрын

I didn't understand the final step, why when you added oil the first time did you start the bike and then add some oil again? couldn't you add the correct amount directly the first time?

@ChillMotoRides 9 ай бұрын

Hey man, You can add the 2.6 liters of oil the first time and just not do anything else. I guess as a percaution the service manual tells you to let the bike run for a couple of minutes so the oil can flow and spread all through the engine and then to double check the level to make absolutely sure that it is correct. In the video I showed the complete procedure to be as faithful to the manual as possible. I hope this answers your question.

@izakf5301 3 ай бұрын

Hey @@ChillMotoRidescool video! By the way, when you checked the oil level. Where does it have to be on the stick? In the middle of min and max or just above the max? Because mine is in the middle and my idle is uneven while warmed up... so I guessed it might want some more oil. Thanks!

@ChillMotoRides 3 ай бұрын

@@izakf5301 Hey man, thanks for the compliment on the video. The oil level should be as near as possible to the max level but not above it. Please also make sure you're reading the oil level with the bike upright, this is very important!

@michastrzebski8785 Ай бұрын

@@ChillMotoRides certain amount of oil gets in to the filter once you fired it up hence you should check the level after initial startup

@rodneyflorescastillo1862 4 ай бұрын

Que tal ese aceite para esa moto ? Como trabaja. ?

@ChillMotoRides 4 ай бұрын

Hey Rodney, sorry but I do not speak spanish, I can however understand it a little bit 😅. I am guessing you are asking about the oil, it is good, the engine works fine, no strange noises, no leaks. I am going to change the oil again soon (probably won't film it this time), I can give you feedback about how the oil looks then.

@duarteleal5964 6 ай бұрын

this might seem like a dumb question, but the oil you put in was clear and what came out was dark, why?

@ChillMotoRides 6 ай бұрын

Hey Duarte, there are no dumb questions, we only learn when we question things. Well, you might not know but motor oil actually has many other functions aside from the obvious that is lubrication. Motor oil also contain aditives that clean the inside of your engine of carbon residue created during combustion. The oil breaks down these residues and they are disolved in the oil, with enough time, the oil becomes saturated with contaminants and changes the color to a darker tint. This is why used oil is way darker than new oil, and the darker the oil is, the more contaminated it is. Does this answer your question? If you still have any more questions about this or any other topic that I can help, feel free to ask as many as you want 😅. Ride safe bro ✌️

@duarteleal5964 6 ай бұрын

Agora é que vi que és pt. Esclareceu sim!

@ChillMotoRides 6 ай бұрын

Sou sim 😅. Sem problema, qualquer coisa que consiga ajudar já sabes ✌

@silver_surfer88 2 ай бұрын

Especialmente por causa da embraiagem tb ser banhada com o mesmo óleo, obrigado pelo conteúdo, continua

@rjpalicte 9 ай бұрын

what was that spray you used to clean the drain plug after you reinstalled it?

@Lonewolf-kw8gg 8 ай бұрын

brake clean

@ChillMotoRides 8 ай бұрын

Yep, that's right I've used brake cleaner and wiped it off after.

@canadianlife31 3 ай бұрын

Where do you buy the drain plug washer to???

@ChillMotoRides 3 ай бұрын

Hey hey, I've bought some from AutoDoc, and some from my local Honda dealer.

@2lenny1 3 ай бұрын

How often you have to change the Oil?

@ChillMotoRides 3 ай бұрын

Hey Lenny, every 12.000kms or 1 year, whichever comes first.

@2lenny1 3 ай бұрын

@@ChillMotoRides Thanks for the Info and your fast reply

@1911doc 11 ай бұрын

How come 10W-40 and not recommended 10W-30?

@ChillMotoRides 11 ай бұрын

Hey, You are absolutely right, the Honda service manual does recommend 10W-30, however, here in Portugal, the official honda shops use 10W-40 (I guess it's related to our climate, you can search more about it if you want). Since the official shops use 10W-40 I decided to use it as well. My advice is to check with your local honda dealers and shops and see what they think it's best. Otherwise just use 10W-30 as the manual says, there should be no problem either way. Good luck and ride safe ✌

@1911doc 11 ай бұрын

Didn't know they change oil type by regions, interesting. Thanks for the info, and nice video. Keep it going...@@ChillMotoRides

@ChillMotoRides 11 ай бұрын

No worries man, and thanks for the kind words 💪✌

@jmsci7407 2 ай бұрын

@@ChillMotoRides hey man 10w30 is bad if it"s very hot ...10 w30 for 30 degree max

@buddy9878 Жыл бұрын

👍

@ChillMotoRides Жыл бұрын

💪

@Lonewolf-kw8gg 8 ай бұрын

It's better to prime the new filter before installing and remove the filler plug whilst draining the old oil out.

@ChillMotoRides 8 ай бұрын

Hey hey, what do you mean "prime the filter"? Filling the filter with new oil before installing?

@Lonewolf-kw8gg 8 ай бұрын

@@ChillMotoRides Yes, fill the filter with oil before installing it. Much better for the engine at start up.

@ChillMotoRides 7 ай бұрын

Yep, it sure can be a bit better but as you can see from the video, the bike creates oil pressure very quickly either way. With that said, priming the oil filter is an extra step, but you should do if it makes you more confortable. Thank you for your advice ✌