My son loves his Ugly Box, he sends me pictures of all his items he cleans with it.

I believe this is the very best video I've seen on electrolysis of coins. Nice job of putting it together.

Great tutorial. Easy to follow and understand. You don't have over 4000 members for nothing.

panic p-positive a-anode n-negative i-is c-cathode

Beautiful illustrations brother. Thanks

I remember the Negative = Subtract, attaches to what you want to clean/remove rust, oxides, corrosion from; Positive = Add, connect to the side that will accumulate the gunk.

Thanks for the great tutorial, I learned a lot from it. I am going to use your tips and tricks for sure. I just have a couple of questions that were left unanswered. 1. What was the reason you switched the floating circuit to the kathode and why did you switch the copper wire with a silver coin? 2. This is probably related to my first question but how does the floating circuit influence the color of the coin. 3. If you can, could you explain the chemistry behind this set-up. 4. How long should I leave a coin in the electrolysis set-up? (Is there some sort of guideline I could stick to like 'twice as dirty is twice as long' or 'twice as heavy is twice as long'?) 5. Is this process costly energy-wise? How does it compare to say leaving a lamp on? Okay, those were more questions than I thought. I hope you can answer some of these questions. Thanks in advance and again thanks for sharing this vid! Regards from the Netherlands

Cool 😎 enjoyed watching most helpful 👍🤪❤️

Good video. Lots of information. Thanks bud.

Thank you... Can you do a few ancient Roman or Greek coins? I have many id like to clean but would Enjoy a few quality video tutorials with tips and tricks, especially for the Bronze and copper coins. 😎🤘

Excellent!! Question: Have you tried sitting that rig on top of an ultrasonic jewelry cleaner and vibrating it. Might clean quicker. Just wondering :)

Good vid. We can hear you fine btw

Excellent tutorial

Good stuff Frank!! gotta set one up for myself!! Tks

I know what I’m doing today, soldering up a new electrolysis rig. Good work fella. Subscribed! All the best, Scott from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

"Do you realize it's snowing in my room goddammit!?"

Yeh...you are confused! Anode is (+) Cathode is (-)! One more thing...if it's a precious coin & the chemical action didn't clean it enough...never rub it with your fingers or with anything abrasive to clean the residue. Scratches even minute will diminish it's value!

nice video, I'm going to try this set up. Cheers DA :)

Great stuff!!!!!....thanks DA!..Gregg

great video. Thank you Mr. Gringo. subscribing.

Now with the chemical would that have any affect on the value of the coin?

Positive is anode negative is cathode

The wire with the white strip on the insulation is +

The Roman numeral (to the right, upside-down) being VI, it's 6, not 4.

great vid very helpful

The roman numeral isn't 4 (IV), it's 6 (VI).

anode is positive cathode is negative. reverse it for a battery with a load, its that simple!

I put my voin in for an hour. Still wasnt clean. Changed water, half hour later still not clean. Water gunky. Should i do another half hour?

first of all the brine is the electrolyte not a conductor and electrolysis can not take place if the voltage is less than 3 volts

Use a copper penny that needs to be cleaned instead of the nail?

cant you just use a 9v battery as the power source?

Thanks

good video...good info...once you establish you positive and negative...the terms "cathode and anode" are insignificant jargon... + & - is sufficient...that way you won't mix people up...if you were working with a tube radio or a diode...you might want to use those terms...KISS...Keep It Simple Stupid...thanks for you time and effort...GREAT JOB...!!! PS...does it make a difference the voltage being applied (6 vdc or 18 vdc)...??? low/high...

What kind of metal could I use for nickels? For the jump circuit I mean.

??Process time can damage the currency's say an hour or two in a bowl

I think solded gray is neg if it not solded it's p

The coin started off round and ended up ??????? Not if this is the same coin I would say bad fail 😱😱

how much volts is it?

Dude needs to shout a bit more!

Hi how volta ?

Anode= " A N" egative. Cathode= "Cat"alyst

what are you using as your power source ????

Good gawd dude calm down lol

funny guy hahaha Super

?

Are you on oppiads

Could have saved yourself a lot of trouble just saying "positive" and "negative" my guy...

Too much talk...less demo

Could you talk less?