Basic theory of Pneumatic cylinder’s Air consumption & Required air flow capacity

Рет қаралды 6,632

Күн бұрын

Today we're going to talk about Air consumption & Required air flow capacity.
We will study in detail what Pneumatic cylinder’s Air consumption & Required air flow capacity.
If you are curious about that, please watch this video until the end. 😉
🎥 This video was filmed with the support of KCC Co., Ltd.
😊 Video production request or inquiry: global@kccpr.com
🕒Timeline🕒
00:00 Greetings
00:09 Today’s topic
00:42 What is air consumption?
03:47 Example of calculationg air consumption
05:25 What is Required air flow capacity?
08:05 Example of calculationg Required air flow capacity
#Pneumaticcylinder #cylinder #Pneumatic

Пікірлер: 15

@Dmsxj Жыл бұрын

I have watched all the videos, and they are very well done. I am looking forward to the update of the video content!

@ibrafiqa5744 Жыл бұрын

This is GREAT. Commonly Actuator manufacturer already stated the Volume of Air on each model of Actuator. I hope that you can give us the video that will continue this to calculate or to choose the correct SOV, Regulator, Booster, etc. Because when I design the Pneumatic Control System on SDV, I have to look on SOV, QEV or Booster cv to get the correct stroking time.

@prashantdhokiya3767 4 ай бұрын

please make video for air consumption in on-off valve & control valve

@Dmsxj Жыл бұрын

视频很好，期待更新！🎉🎉🎉

@democracyforthepeople2982 Жыл бұрын

Hi Would you circulate Air consumption calculation to fill 1000liter to 100 psi through 50lpm compressor ( tank out let has 50liter tank)

@mangeshpaithankar8719 3 ай бұрын

In calculation why pressure has plus 0.1 and divide 0.1 please explain the conversation

@kundanprasad2407 Жыл бұрын

Nice explanation, thanks a lot for the video. 👏👏. Please make a video for compressor selection.

@MsPneumatic Жыл бұрын

Thank you for your kind words. I will refer to it when selecting a topic in the future.

@f3nunez Жыл бұрын

nice and excellent

@kazuomikun 8 ай бұрын

I have a question, let's say you did this calculation process for 10 actuators in your system and then you get, for the sake of the example, 2500 L/min. This is actually a very large number (2.5 m3/min). The next stage is actually how to "downsize" the required air demand. Would it be based on a simultaneous use factor, and also on a utilization factor? for example of 0.15 and 0.2, repectively, giving then 75 L/min. We also need to consider the air receiver, isn't it?