Basic tools for terracotta jewellery making / Tools for beginners

Рет қаралды 46,087

4 жыл бұрын

Basic terracotta jewellery making tools:
-Low fire earthen ware(local pottery studio)
-unpolished wooden surface (local carpenter)
-rolling pin
-Thickness scales (approach your local carpenter. Pair of 0.5 cms for pendants and pair of 0.25 cms for earrings)
-fettling knife or kitchen knife
• Fettling knife VS basi...
-x-acto knife
www.amazon.in/SVKN-Vishal-sto...
- ribbon tool
www.amazon.in/Kabeer-Ribbon-C...
To know how to use the ribbon tool you may watch the below video :
• How to use a ribbon to...
(found this link which has a set of ribbon tools. If you get single one that would be great, if not then this would be alternative)
-parts of a ball point pen :)
• Tip on how to use your...
- cookie cutters both big and small size ones(should be available at a fancy store or online)
- jhumka mold or quilling mold
www.amazon.in/Quilling-Mould-...
-nichrome wire (Guage 24 for pendants, 26 for earrings and 28 for stick beads and ghungroo beads)
Link for gauge 26 (in India) :
www.amazon.in/ART-IFACT-Resis...
- Pliers (cutting, round tip and nose)
- acrylic paints
- paint brushes ( size 00, 2,4,6,8) all round tip synthetic brushes
- nylon cord
- wooden bead to match that cord size (explained in the video)
- gear wire
- crimp beads
- Doris or colorful cords
- hooks for earrings
- stud posts and the push backs for them
- industrial strength adhesive (Araldite in India works well) you can also try the E6000
Clay used: Laguna red low fire earthen ware clay without grog.
Firing (Bisque) at cone 06.
Wire used: Nichrome wire gauge 28 for stick beads and ghungroo beads; gauge 26 for earrings and 24 for pendants.
Paints used: Acrylic paints (Master's touch, folk art and Anitas)
Brushes: 00,2,4,6 sizes round tip synthetic brushes. I use multiple brands.
Varnish used: www.amazon.com/DecoArt-DS21-9...
Pottery tool kit with a fettling knife:
www.amazon.in/Mont-Marte-Pott...
Pottery tool kits that can be used for those starting of: (India)
www.amazon.in/KABEER-ART-Pott...
Fettling knife: (India)
www.amazon.in/Generic-Ceramic...
Ball tools: (India)
www.amazon.in/dp/B07R671RY1/r...
Silicon tip finishing brushes: (India)
www.amazon.in/KNAFS-Polymer-C...
Wooden modelling tools:
www.amazon.in/Asian-Hobby-Cra...
Hole cutter:
www.amazon.com/Tegg-Stainless...
Fettling knife:
www.amazon.com/Kemper-Fettlin...
Jhumka or quilling mould:
www.amazon.in/Quilling-Mould-...
Adhesive used for studs: E6000 (US) or Araldite (India)
This is not a promotional post.
Hope you all like the video. If yes, please like the video and subscribe to our KZfaq channel.
Thanks for watching.
Ways to get in touch:
Email: paintedearthbyneha@gmail.com
Facebook: mypaintedEarth
Blog: nehagopinathpillai.wordpress.com
Instagram: / paintedearthbyneha
Pinterest: / mypaintedearth
KZfaq: / paintedearthbyneha

Пікірлер: 288

@neetainamdar2475 3 жыл бұрын

Thanks mam for sharing this video. Really very useful and helping to making jewelry for beginners.

@Worrier629 Жыл бұрын

I wish other artists were as generous as you to share knowledge to help build skills of varied kind. I’m struggling with handbuilding ceramics with stoneware but I like watching your vids for surface decoration.

@munjamanusha6864 Жыл бұрын

You are my inspiration mam.

@suthiksharithika1355 2 жыл бұрын

Thanks alot mam for saying an idea for buying terracotta materials

@user-xr3kb6rg9d 9 ай бұрын

Thank you mam

@archanagupta7875 2 жыл бұрын

Thanq for details

@kalaivanansuryanarayanan6478 2 жыл бұрын

Hi.....great video.........very useful for beginners ......

@ShashikalaM-xu2vw 7 ай бұрын

Thanks a lot for detail information

@Devika-sv2rt 4 ай бұрын

Thank you mam..

@preetitasgaonkar4193 Жыл бұрын

Thanks a ton MAM. I really liked the way you explained. I am a beginner in terracotta jewellery making and you inspire me a lot MAM.

@kalyani918 2 жыл бұрын

Thanks Neha, it was very useful!!

@meetawadiker5831 3 жыл бұрын

Thanks

@nehagopinathpillai 3 жыл бұрын

You are most welcome!

@priyankasg4680 4 жыл бұрын

Very useful video mam

@nehagopinathpillai 4 жыл бұрын

Thank you so much!

@darthic.1856 4 жыл бұрын

Thank you sooo much...

@nehagopinathpillai 4 жыл бұрын

Most welcome 😊

@lakshmijayaraman 3 жыл бұрын

Very nicely explained

@nehagopinathpillai 3 жыл бұрын

Thank you so much 🙂

@kamanamuley4232 4 жыл бұрын

Thanks for the information!👌👌

@nehagopinathpillai 4 жыл бұрын

Sure! :)

@avnimistry9748 4 жыл бұрын

Thanks a lot for the video

@nehagopinathpillai 4 жыл бұрын

Sure! :)

@rajeshrikumkar9358 9 ай бұрын

❤

@chandramani5740 4 жыл бұрын

Thanks alot for helping new bees 😍

@nehagopinathpillai 4 жыл бұрын

Glad you find it useful!

@meenakshifoundation5137 3 жыл бұрын

Thanks a lot sis I'm waiting for this video thank you so much 😊😊😊❤️❤️❤️

@elsymathew7799 3 ай бұрын

Thanks a lot for this excellent video. Being a beginner like me it's very helpful ❤

@anjalikale3380 4 жыл бұрын

Thank you Neha for uploading the video. Extremely great, simple and informative video.👌👌👌

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Glad you find it useful :)

@meerasankar2286 4 жыл бұрын

Thank you so much for the video mam !

@nehagopinathpillai 4 жыл бұрын

Sure, hope you find it useful. :)

@ankithapadma9317 4 жыл бұрын

I really loved your way of explanation..thanks very much..

@nehagopinathpillai 4 жыл бұрын

You are most welcome

@narmiskitchen 4 жыл бұрын

Very very useful.... Thank you....

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Glad you find it useful!

@MyKitchenYourTaste Жыл бұрын

Excellent voice and explain...newer go off your efforts simply... All the best dear❤️

@lalithashankar1 3 жыл бұрын

Thanks Neha ,very well explained

@nehagopinathpillai 3 жыл бұрын

My pleasure 😊

@SahanasWorld 4 жыл бұрын

Super video.. Thanks so much 😊

@nehagopinathpillai 4 жыл бұрын

Thank you so much! :)

@seemap5846 3 жыл бұрын

Thanks a lot.. This is, what I am searching for.....

@nehagopinathpillai 3 жыл бұрын

You are most welcome! :)

@vijayganeshganesh9476 4 жыл бұрын

Thankyou ,it's very useful the way you are speaking too 👌🙌

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Glad you find it useful :)

@shalinikapoorlamba5246 4 жыл бұрын

Thank you for your guidance ...was waiting for such a video.... thanks again

@nehagopinathpillai 4 жыл бұрын

Sure, that's fine. Glad I was of help :)

@rashmi_numerologist1712 4 жыл бұрын

Thanku so much mam for all information....U r really appreciated...👌👌💐💐💐💐

@nehagopinathpillai 4 жыл бұрын

You are welcome! ✨😌

@isabellrc Жыл бұрын

Finding the appropriate materials is useful. I found, in all the arts/crafts I’m learning, led me to buy too much!

@manadiary2102 3 жыл бұрын

Thank you to share this vedio ma'am... it's really useful for beginners ..... and the way of explaining is awsome🥰I like it

@nehagopinathpillai 3 жыл бұрын

Most welcome 😊 Glad you found it useful!

@gayatriraikar9726 Жыл бұрын

Very good detail information for starting making terracotta jewelry thank you neha. Where do we get nichrome wire in bulk?

@beautyviewwithkeerthi3180 4 жыл бұрын

Very useful video mam thank you and ur way of explaining is to good

@nehagopinathpillai 4 жыл бұрын

Thank you so much! :)

@dheeptim1549 4 жыл бұрын

Need o know that end beads size

@ramyadurai1692 2 жыл бұрын

What kind of varnish we need to use for terracotta jewelry?

@satishpatil-py4zn 4 жыл бұрын

Thanks a lot mam. Most super video of all. I am ur new subscriber. By mohini

@nehagopinathpillai 4 жыл бұрын

Glad you like the video. Welcome to the channel! :)

@ritarajgor7199 4 жыл бұрын

Wow its very very useful vdo for beginners .sorry 4 late comment busy in navratri .neha mam Happy navratri for u nd your family 👍👌👏🙏

@nehagopinathpillai 4 жыл бұрын

Thank you so much Rita! Happy Navratri to you and your family! :)

@simidutta8866 Жыл бұрын

Can we use copper wire instead of nichrome wire?

@rekhakn7866 3 жыл бұрын

Hello neha mam... I am your new subscriber i am very thankful to make this video.

@nehagopinathpillai 3 жыл бұрын

Welcome to our channel! Glad you found this video useful :)

@saigeetha850 2 жыл бұрын

Hi neha akka iam ur new subscriber frm Tamilnadu.i like ur video its useful for new beginners.tq❤️

@nehagopinathpillai 2 жыл бұрын

Thank you so much & welcome to our channel :)

@VRCreationRajiRajakumar 4 жыл бұрын

Such tips are very useful to me. Thank you.In local ear hooks arevery thin.but you show the quality ear hooks. Where we buy it. And also the nichrome wire.

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Regarding hooks - I picked up mine in bulk from a store in Bangalore. But I sometimes change stores just to compare the quality. Nichrome wire should be available on Amazon.in. Do look it up.

@sindhujaagin2767 4 жыл бұрын

Mam...i am sidhuja Agin... really well...wow what finishing..I never see like urs....plz post a video..for beginners like me I am so much interested to learn...keep doing the same ....GOD BLESS YOU ☺️☺️☺️☺️☺️

@nehagopinathpillai 4 жыл бұрын

Hello Sindhuja, Welcome to our channel. Thank you so much for your feedback! You can check this link for beginners: kzfaq.info/sun/PLrLYTN-iFD14m7yWS0U_9mBpsD9aUHuKp Hope this helps.

@tarunchakraborty7816 3 жыл бұрын

Mam really good job of making and total matter of lnformetion and spking so nice l am proud, hat's of you for nice tiching A to z l🙄😁👍👍👍

@nehagopinathpillai 3 жыл бұрын

Thanks a lot 😊 Glad you like the video

@radhaganesh964 3 жыл бұрын

Pls give tips and demo for how to bake the clay at hiome... Would be very helpful 🙏💛

@nehagopinathpillai 3 жыл бұрын

I don't own a kiln so I take my work to a pottery studio close by and get it fired in an electric kiln there. I have never tried firing terracotta at home.

@mihaelashimpi9635 4 жыл бұрын

Thank you for the detailed list of items needed to make jewellery. It is really useful. Where do you get the simple black cord from?

@nehagopinathpillai 4 жыл бұрын

Glad to be of help :) I picked up the black nylon cord in bulk from a fancy store back in Bangalore. Its easily available in stores which sell pooja items or even fancy stores.

@mihaelashimpi9635 4 жыл бұрын

@@nehagopinathpillai ok..thank you so much 😊

@souumitaspicekitchen6033 2 жыл бұрын

@@nehagopinathpillai contact no of pooja

@sumitadebnath3162 2 ай бұрын

Mam I want to colour it teracotta colour so which colour I use

@pearlgoddess965 Жыл бұрын

Love your content! Thank you for the generosity in sharing ur knowledge. Do you have a course? Thank u. HAGD.

@swatitarotshreem8661 Жыл бұрын

Can u pls post link for crimp beads and crimp cover.।। And studs etc

@mihaelashimpi9635 4 жыл бұрын

Please do upload a video about how to seal a chain with the help of crimp beads..Mine are breaking while trying to press on them. And also, if you can explain how to assemble a chain using wire and cord. Thank you😊

@nehagopinathpillai 4 жыл бұрын

Sure thing, I can do that :)

@priyadharsini905 4 жыл бұрын

Wow really very useful, where u getting nicrome wire in US

@nehagopinathpillai 4 жыл бұрын

It's available on Amazon.

@reshihm6491 4 жыл бұрын

Nice information mam pls make tutorial packaging terracotta jewellery how do u pack

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Bubble wrap and thermocole. I usually pack them in small carton boxes. You can also use corrugated sheets.

@pavikshtriyas6921 4 жыл бұрын

Thanks you Sooo much for helping lik diz. We're it ll get all diz staff dea Wat paint is Dat n were u ll get dat paint dea

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Please check the description box.

@sandipabhattacharjee1583 4 жыл бұрын

Thank you for this vedio. Where I can find this colourful cutters

@nehagopinathpillai 4 жыл бұрын

You are welcome. You can check the description box for a couple of links. You can also look up amazon.

@lataranganathan2212 4 жыл бұрын

Hi very very informative video Ms.Neha . Love it. Pl post some basic designs to start with. Thx a lot

@nehagopinathpillai 4 жыл бұрын

Glad you find it useful. You can check out our playlist kzfaq.info/sun/PLrLYTN-iFD14m7yWS0U_9mBpsD9aUHuKp

@nehagopinathpillai 4 жыл бұрын

We also offer channel membership for 59 Rs per month. This would allow you watch three exclusive (Members only) videos that will be posted on every 5 th 15th and 25th of every month. Do check out this video : kzfaq.info/get/bejne/Y9ygmL1p0dHUl4E.html

@lataranganathan2212 4 жыл бұрын

Sure

@shrihomevlogs 2 жыл бұрын

Hi Neha, Wonderful explanation..Can u please tell the size of nylon cord and wood bead size??

@nehagopinathpillai 2 жыл бұрын

Thank you so much!:) I use 3-4mm, 1.5mm and 1.18mm thickness cords. The bead I choose matches the size of the cord.

@shreemati5539 4 жыл бұрын

Maam thank you so much for the video.. can you pls show us how to do proper small beads

@nehagopinathpillai 4 жыл бұрын

You are most welcome. This is how I make my beads. please click on the link below: kzfaq.info/get/bejne/b9mip6mQzNDUe5s.html

@kanagadurga1483 3 жыл бұрын

For gold colour, you re using antique gold. We know that. But for other colours which one should we use? Normal acrylic colours or metallic colours. Which one is good for making jewels? Is there any chances to peel off colours from beads?

@nehagopinathpillai 3 жыл бұрын

You could refer some of my painting videos. Have a lot them on my channel. With regard to paints, back in India, I would use Fevicryl Hobby ideas and here in the US I use several brands such as master's touch, folk art, anita's , liquitex

@dhivyam2728 4 жыл бұрын

Did you use varnish spary after finishing paint mam?

@nehagopinathpillai 4 жыл бұрын

I use a liquid varnish. I don't use a spray varnish.

@shraddhamestry7815 4 жыл бұрын

In your video which brand you using acrylic paint?

@nehagopinathpillai 4 жыл бұрын

Master's touch

@kjgeethakumar6977 4 жыл бұрын

Hi neha iam using 22grade nichrome wire forstick beads, pendiant hook, jumka hook . This ok or I want ur advice

@nehagopinathpillai 4 жыл бұрын

I typically suggest 24 for pendant hooks, 26 for earrings and 28 for stick beads and ghungroo beads.

@truyennhanflorentino101 4 жыл бұрын

Like 🤝 🤝🤝🤝🤝❤️

@nehagopinathpillai 4 жыл бұрын

Thank you so much✨✨

@percya6468 Жыл бұрын

Hello ma'am, where to get that small cookie cutter. Kindly provide link :)

@arpitaroy5302 9 ай бұрын

Mam Plz share beads amazon link

@megkri4197 3 жыл бұрын

Neha I see you got that black cord from Bangalore. Any idea if we can find something like that similar in US either in stores or online. Please advise

@nehagopinathpillai 3 жыл бұрын

amzn.to/30EtxpP Hope this helps.

@vaishnavialagarsamy2784 3 жыл бұрын

Hi , Ur explanations are very professional I like a lot, in Amazon US website whether nylon cord available do u have any link?

@nehagopinathpillai 3 жыл бұрын

Thank you so much! The 3-4mm thickness nylon cord was bought in Bangalore (at MK fancy in Jayanagar 4th block. I use a 1.18 mm thin black nylon cord that I bought here: amzn.to/2JJZlmY

@aditishrivastava2243 4 жыл бұрын

Nice and informative video... thanks Neha. Would like to know if the terracotta clay jewellery be baked in convection oven?

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Not at all. Typically low fire earthen ware clay has to be fired between 900 - 1100 degrees C for a duration of 8 hours and cooling down period of anther 8 hours or so. That wouldn't be possible in a convection oven. If you have access to a ceramic or pottery studio close by, you can check if they provide firing services.

@aditishrivastava2243 4 жыл бұрын

@@nehagopinathpillai Thank you for clarifying. Ok can we use MDF also, as a working space?

@nehagopinathpillai 4 жыл бұрын

@@aditishrivastava2243 sure you may. Wood tends to warp with time, so you might just have to replace it when that happens. It's common and most of us just replace the board. So I suggest you don't spend too much on that. Also, please don't use anything with varnish/laminate or polish on.

@aditishrivastava2243 4 жыл бұрын

@@nehagopinathpillai Thank you 😊

@aryachandran3567 3 жыл бұрын

Which glue is using for making

@nehagopinathpillai 3 жыл бұрын

I use E6000

@bhavnarajawat4934 4 жыл бұрын

Thanks neha mam for this video,but i m confused about nichrome wire on Amazon only gauge 24 and 26 are available were can i buy gauge 28 wire ?

@nehagopinathpillai 4 жыл бұрын

You can try using 26 for stick and ghungroo beads too. 28 is thinner and more flexible, hence I suggest that for the ghungroo and stick beads. But if you aren't able to get it, 26 should also work.

@faisalgalaatta6743 2 жыл бұрын

This clay for homed clay ag

@user-vj8qu4jv4s 8 ай бұрын

Why is the paint peeling off aftervsome use

@o.divyanagapoojithamis6195 3 жыл бұрын

mam what type of hanging for bead which we add in end of pendant

@nehagopinathpillai 3 жыл бұрын

You mean a ghungroo bead?

@ShashikalaM-xu2vw 7 ай бұрын

Where can we get Nicrome wire like you have Mam? Here we are getting very small quantity in a packet.

@dhivyam2728 4 жыл бұрын

Did you use terracotta primer?

@nehagopinathpillai 4 жыл бұрын

Nope I don't.

@amirthavalli3589 4 жыл бұрын

Thanks a lot for sharing mam.😁

@nehagopinathpillai 4 жыл бұрын

Sure, hopefully you find it useful :)

@amirthavalli3589 4 жыл бұрын

@@nehagopinathpillai very much mam

@chandrama774 4 жыл бұрын

Thank u Neha. Love u.. u r honest, sincere, adorable & lovely voice.

@nehagopinathpillai 4 жыл бұрын

@@chandrama774 thank you so much for your kind words :) glad I was able to help.

@chandrama774 4 жыл бұрын

@@nehagopinathpillai hi neha.. i want to start practicing Terracota Jewellery.. from where to start pls guide me.. got clay & basic tool kit..

@deepikaanimator4286 4 жыл бұрын

Hi Neha. Very useful video for a starter thank u so much. Can u upload an video of making a mural face pendant. Which u hv updated in ur FB page

@nehagopinathpillai 4 жыл бұрын

Thank you! Do check if this video helps. kzfaq.info/get/bejne/jsCjntVy082xj2g.html

@kjgeethakumar6977 4 жыл бұрын

Which grade nichrome wire u use for u pin, pl help me

@nehagopinathpillai 4 жыл бұрын

@Flammeee 4 жыл бұрын

Thank you so much for this vedio... I just want to start to make terracotta jewelry.... I don't have any tool with me except acrylic paint and brush😜😢... I am staying in Ajman right now.. I am searching online for getting the clay and the tools. But some sites you shared is not reachable for me.... Really appreciate you.. Your creativity. Excellent....

@nehagopinathpillai 4 жыл бұрын

Thank you so very much for your feedback! If you have done clay, and access to a pottery studio near by to fire your work, you can still make still try it without any tools. The links I have provided are for India and US.

@Flammeee 4 жыл бұрын

@@nehagopinathpillai thank you for your quick reply..... I didn't get the clay.. In Amazon I found Jovi Air Hardening Modelling Clay, 500 gm - Terracotta, is this the right clay am I ordering??

@nehagopinathpillai 4 жыл бұрын

@@Flammeee I don't use air dry clay. The clay I use needs to be fired in a kiln before it can be used. But if you are trying for the first time and don't have access to a studio near by, you can try with air dry clay. You can check the instructions on the package. I haven't used air dry so I won't be and to give you an opinion on that.

@Flammeee 4 жыл бұрын

@@nehagopinathpillai thank you mam for your suggestions

@vaniviswa6068 4 жыл бұрын

Neha you are great teacher.can you please let know how strong is the eye pin and upin hold in the teracotta after bake.I doubt it wont hold stronger.

@nehagopinathpillai 4 жыл бұрын

Thank you so much! Eye pin/head pins are used for assembling(post firing). Pre-firing (before firing) while making the piece, while the clay is still wet, nichrome wire is used. A combination of nickel and chromium, it's a high temp wire which doesn't melt in the kiln while firing.

@vaniviswa6068 4 жыл бұрын

Do nicrome wire hold the heavy pendant without coming out.please let me the klin i should buy for firing.something small for jewellery

@nehagopinathpillai 4 жыл бұрын

@@vaniviswa6068 high temp wire is what everyone uses for ceramics /pottery. And yes, it seems to do a decent job. A well known brand for kilns is Skutt. Skutt kilns go 600 $ and upwards. If you are a beginner I wouldn't suggest it. I don't own a kiln myself, and prefer outsourcing that service from the studio.

@beenathomas8262 4 жыл бұрын

Hello from where do you get the terracotta clay??

@nehagopinathpillai 4 жыл бұрын

I get it from a local pottery studio here in the US.

@sagayasherlin571 3 жыл бұрын

Hi mam,thank u soooo much for this video.i want to know about the nylon cord size and also the end beeds size.pls guide me mam.

@nehagopinathpillai 3 жыл бұрын

You are most welcome! I use the nylon cord as per the bead hole size I make for my terracotta beads. I use three sizes 3-4mm, 1.5mm and 1.18m. If the cord is around 3mm thickness then the wooden bead hole could be around 3-4mm.. Please note that I am referring to the hole size and not the bead size itself. You can try a local fancy store. It's easily available and a lot of cheaper than what's been sold online.

@sagayasherlin571 3 жыл бұрын

Thank u so much for the rply. U r THE BEST TUTOR mam.love u lot...

@lavanyav1687 4 жыл бұрын

Haii mam thanks for your lovely video it's useful too.. I don't need any clay.. how I purchased... Mam

@nehagopinathpillai 4 жыл бұрын

Thank you so much! You can check the description box of the videos. I have provided some links to materials I use.

@lavanyav1687 4 жыл бұрын

@@nehagopinathpillai thank you mam.. for ur kind rply...

@gnanagowthami1524 3 жыл бұрын

Please letus know different types of cords to make neck pieces🙏

@nehagopinathpillai 3 жыл бұрын

please check out our playlists. There are over 250+ videos with a variety of work.

@sugumarikumar2724 4 жыл бұрын

Hi mam...i watched all ur videos all are superb and useful one...I had a doubt mam..pls tell me ..where to get the clay?? Where did u purchase???

@nehagopinathpillai 4 жыл бұрын

Thank you so much! I live in the US currently. So I buy my clay from a studio here. The brand I use here is "laguna" red low fire earthen ware clay.

@sugumarikumar2724 4 жыл бұрын

@@nehagopinathpillai thank u mam .. for ur responsible reply...I live in india .. Tamilnadu..I am very fond of terracotta jewels ..that too I want to make it by myself...ur videos are very useful to everyone like me...u mentioned all things details from where u have purchased..I am very confused in purchasing the clay..can u suggest me . from where I have to shop the clay...

@K.Manav_creations Жыл бұрын

Mam Hindi me bhi vedio banoo

@gnanagowthami1524 3 жыл бұрын

Can we manage with a quilling mould instead of scales for making pendants n ear rings?

@nehagopinathpillai 3 жыл бұрын

What scales? Are you referring to the scales used to make slabs? I use a quilling/jhumka mold to make jhumkas and beads.

@gnanagowthami1524 3 жыл бұрын

@@nehagopinathpillai the wooden bits u use to make beads n pendants, the ones u asked us to get done from local carpenters

@nehagopinathpillai 3 жыл бұрын

@@gnanagowthami1524 That's for a slab construction. kzfaq.info/get/bejne/qsVja7ibsLPKpac.html

@gnanagowthami1524 3 жыл бұрын

@@nehagopinathpillai thanku Nehagaru

@kamanamuley4232 4 жыл бұрын

Could you show us how to pack the final product for shipping now that there is plastic ban in india

@nehagopinathpillai 4 жыл бұрын

I do use bubble wrap, but if that's banned too then using paper shreds works. Lots of it though! A 3 ply corrugated box helps. You do get corrugated sheets for packing. You can also get thermocole sheets - that too works perfectly well.

@abinayathangapandian3697 4 жыл бұрын

Iam ready for terracotta jewellery.tip forany model matrialpurchase and how totips it to business help

@nehagopinathpillai 4 жыл бұрын

If you are interested in online terracotta jewellery making tutorials please send me an email on paintedearthbyneha@gmail.com

@gnanagowthami1524 3 жыл бұрын

Mam, please make a vdo on how to use tools exclusively please Neha garu

@nehagopinathpillai 3 жыл бұрын

I have a lot of videos videos where I have shared ways of using tools to create patterns. Will continue to do so.

@gnanagowthami1524 3 жыл бұрын

@@nehagopinathpillai please mam

@anushmitasmommy21 3 жыл бұрын

Can we use airdry clay for making jewels???

@nehagopinathpillai 3 жыл бұрын

You can try but you can't call it terracotta jewellery. You can call it air dry clay jewellery:)

@anushmitasmommy21 3 жыл бұрын

@@nehagopinathpillai thank you for your reply... Sure I'll use natural clay

@narmadajayaseelan1857 3 жыл бұрын

How to get cookies cutter.. small size one...

@nehagopinathpillai 3 жыл бұрын

knowhowartcraft.com/16-in-1-mini-cutter.html Check this out. I didn't buy it from here though. Mine's rather old, picked it from Bangalore. A store called MK Fancy in Jayanagar 4th block complex.

@tirthaabir3053 3 жыл бұрын

After input the wire in the beads, is firing effect the wire?

@nehagopinathpillai 3 жыл бұрын

I use a nichrome wire. That being a high temp wire, it will sustain kiln firing. It won't melt. I use a nichrome wire gauges 24 for pendants, 26 for earrings and 28 for ghungroo beads and stick beads.

@tirthaabir3053 3 жыл бұрын

Thank you mam 😇😇

@rajarajeswaris8875 4 жыл бұрын

From where you are getting the these material?

@nehagopinathpillai 4 жыл бұрын

Different places. I have some tools that are almost 11 years old. I collect. :)

@wishnubalaji1727 4 жыл бұрын

Hi mam What is the metal of the hook? Can they burn it? & how to bying stud, hooks? Plz tell me mam

@nehagopinathpillai 4 жыл бұрын

Please check the description box

@manupillai7084 4 жыл бұрын

Thanks for the detailed information Neha. I had purchased from u some uncolored beads some 4-5 yrs bck still not painted. I prefer matte finish like u have done for all my jewellery.. Can u pls let me know if I use fevicryl acrylic and mix it with matte medium will I get the matte finish

@nehagopinathpillai 4 жыл бұрын

Hello Manu, if you have an option to pick up Matt paints then go for it. I have never used a medium, so I don't know much about it. But off late we do get glossy and matt finish acrylic paints in the market.

@nivedhar5317 3 жыл бұрын

Hi mam will u bake this

@nehagopinathpillai 3 жыл бұрын

kzfaq.info/get/bejne/g8CUjNJ2l8ndoX0.html

@priyatripathi9083 4 жыл бұрын

Please tell me where would i get that teracotta clay.... Pls pls pls i need it urgently..... Pls answer mam

@nehagopinathpillai 4 жыл бұрын

I live in in the US so i buy this clay locally here. Back in India, I would buy my clay from a studio called Clay Joy, Bangalore. You can check there.

@priyatripathi9083 4 жыл бұрын

@@nehagopinathpillai thanks 😊

@arulprasath6021 4 жыл бұрын

Mam.. give..the link fo clay..to buy..Mam..pls...

@nehagopinathpillai 4 жыл бұрын

Hello! I buy my clay from a studio here in the US. Back in Bangalore I would my clay from a studio called Clay Joy owned by Mr Ramanuja. You can look up Clay Station in Bangalore. Both are pottery studios in Bangalore. Both sell clay and provide firing facilities.