Basic VCR Servicing

No video

Basic VCR Servicing

Рет қаралды 1,622

2 жыл бұрын

This video is intended for the novice.
IMPORTANT - BEFORE WORKING ON ANY ELECTRICAL EQUIPMENT, ENSURE IF HAS BEEN UNPLUGGED
The video covers some very basic troubleshooting that you can carry out on any VCR.
There has been a bit of a resurgence for magnetic media, of late. This means a spike in the sales of secondhand VHS and Betamax decks. The problem that can sometimes come about, is that the VCR is returned to the seller, as 'broken'. This can be a simple case of a bad tape being used in the machine.
Before sending the deck back, you can try carefully cleaning the tape path, so, the video heads and audio heads.

Пікірлер: 6

@jkmac625 2 жыл бұрын

VHS Hi-Fi is an interesting format when you consider how it's recorded. The lower frequencies required for audio (1.4 MHz for left and 1.8 MHz for right) together with a larger head gap allow the Hi-Fi audio RF signal to penetrate deeper into the oxide layers of the tape. The video heads then record their signal on top of the audio, partially erasing it. But the higher frequencies and the smaller head gap mean that the video signals are only recorded on the top layer of oxide, so enough of the Hi-Fi signal remains in the deeper layers of oxide, and the loss of audio RF is quoted to be around 12dB. This is what is known as Depth Multiplex Recording. The Hi-Fi tracks are also narrower than the Video tracks. For PAL-SP the Hi-Fi tracks are 23μm and the video tracks are 49μm, so there are guard bands in the Hi-Fi audio but not in the video. The azimuth offset between the heads is also increased, where it's +/- 6 degrees for the video it's +/- 30 degrees for the Hi-Fi audio, further preventing any cross-talk. As a very rough analogy it's a bit like dual layer DVDs, the Hi-Fi audio heads are focused on a deeper layer of the tape oxide and the video heads focus on the top layer of oxide. This also explains why it's not possible to "audio dub" over the Hi-Fi audio, as it's buried underneath the video. There was a deck, probably a professional one, that could record just the Hi-Fi audio on it's own, then edit the video on top of the audio. But most editing decks insert Video/Hi-Fi together and audio inserts can only be done on the linear tracks.

@JCTsFascinatingHobbies 2 жыл бұрын

And that's before we get onto PCM audio via the video heads (see, Sony PCM F1, and that weird Technics VHS deck)

@TheRetroBristolian 2 жыл бұрын

Thanks for the video, in regards to the head cleaner foam auto cleaner. is removing just the foam enough or do you need to disable the arm somehow?

@JCTsFascinatingHobbies 2 жыл бұрын

It depends on the deck, the JVC shown in the video, had the arm clipped to the metal deck. It would move when the loading pegs unlaced and laced, interacting with the head drum, as it did so. On some deck, you need to carefully dismantle the assembly, on other decks, removing the foam pad is enough, and shown be enough, just ensure the arm does not make contact with the head drum, when lacing and unlacing a cassette.

@kingshearer2 Жыл бұрын

Mine was fitted to a plastic support which pivoted via a spindal fitted to the chassis of the VCR and all I did was at the pivot point pulled it out of the chassis .