Basics for CNC Beginners: Changing Bits During a Project

Рет қаралды 3,180

Күн бұрын

Gain the confidence to effortlessly craft multi-bit projects. Join us as we demonstrate the process of changing bits during your CNC projects that require multiple tool transitions.
Chapters:
00:00 - What’s this video about?
00:44 - Steps For Success
02:15 - Assigning Bits to Toolpaths
03:31 - Saving Toolpaths
04:40 - Toolpath Warning
05:25 - gSender
05:45 - Secure Material
06:10 - Mount First Bit
06:42 - Zero Your Bit and Tip
07:50 - Load and Run First Gcode File
08:20 - Load Second Gcode File
08:42 - Change to Second Bit
09:08 - Re-Zero Z Axis Only
09:46 - Run Second Gcode File
11:24 - Summary
Know the Beginners Kit
sienci.com/product/longmill-m...
Know the new AutoZero Touch Plate
sienci.com/product/autozero/
Know the Starter End Mill Set
sienci.com/product/sems/
Know the Sign Makers End Mill Set
sienci.com/product/sign-makin...
Know the 3D Carver End Mill Set
sienci.com/product/3d-carver-...
Know the Machinists End Mill Set
sienci.com/product/machinists...
Know the LongMill MK2
sienci.com/product/longmill-mk2/
• Resources
Long Mill Resources Page I Sienci Labs
resources.sienci.com/view/lm-...
// FEATURED TOOLS & SOFTWARES
•Softwares
gSender | Sienci Labs
sienci.com/gsender/
Vectric V-Carve Pro V11
sienci.com/product/vectric-vc...
Vectric V-Carve Desktop V11
sienci.com/product/vectric-vc...
• LongMill Add-ons
Dust Shoe I Sienci Labs
resources.sienci.com/view/lm-...
TouchPlate I Sienci Labs
resources.sienci.com/view/lm-...
Checklist Poster
bit.ly/checklist_LongMill_Sie...
// PROJECT IDEAS
• resources.sienci.com/view/lm-...
// JOIN US
• Facebook Group | / mill.one
• Instagram | / siencilabs
Hashtags:
#siencilabs #longmill #cnc #cncmachining #basicsforcncbeginners #cncbeginner #cncprojects #bitchanging #cnc101 #machiningtips #multibitprojects

Пікірлер: 27

@user-cl4iq5sk6n 19 күн бұрын

Thanks for the help. Excellent process for changing bits.

@SienciLabs 3 күн бұрын

Thanks! Appreciated! :D

@beardedlocoswoodworks 6 күн бұрын

It’s all great but easy stuff. You need to do a video on a two part bit job. I struggled with that at the beginning but now got it down “I think “ lol maybe you have a better n easier way. Thanks. Great video.

@SienciLabs 3 күн бұрын

Thanks for the input! We've done LOTS of videos that use more than 1 bit/bit changes, just check out our YT page. Unless we're misunderstanding what you're saying? Let us know!

@aungmyat7242 3 ай бұрын

Thank you very much for step by step.

@SienciLabs 3 ай бұрын

Glad it was helpful! 😊

@heathmichael142 8 ай бұрын

Thanks so much for making this video! Please keep them coming!

@SienciLabs 8 ай бұрын

Glad you found it helpful! We've got a bunch more planned, stay tuned!

@luckyanjeh4418 4 ай бұрын

Excellent video with fun. thank you dude

@SienciLabs 4 ай бұрын

We're glad you enjoyed it! We appreciate the compliment! 🙌

@stephenfirlotte7712 9 ай бұрын

Great video, you made it great by telling us the steps then demonstrating the steps. a thought for a future video, multi bits, multi projects(G54, G55...) using same bit on each job. Can demonstrate same job done on this video x 2(3...)(as an example). This would be set up doing multiple jobs with fewer bit changes and reduce over all time.

@SienciLabs 9 ай бұрын

Thanks Stephen, we appreciate the kind words. Great suggestion for the future video, we'll absolutely add that to our list!

@ScottHorsley 9 ай бұрын

Great video, however, if your CNC is using belts, changing your bit can actually cause the head to move (that is vague i realise). If that happens, a complete homing can be helpful between cuts but totally depends on your setup.

@jav9888 9 ай бұрын

GREAT video!! can you show this for the original touch plate? or is it the same process just flip over and let it hit the plate?

@SienciLabs 9 ай бұрын

Same process! Make sure you have the original touch plate selected in the settings and you'll be good to go 🙂

@ClintonCaraway-CNC 9 ай бұрын

Does the Longboard controller support a tool length probe for saving all the files together and just loading tools and having them touch off when needed?? Something similar to the C3D Bitsetter or the probes you can use with the Masso controller???

@SienciLabs 9 ай бұрын

The new SuperLongBoard we're working on we plan to have native support for tool changing which we're really excited about, but due to grbl limitations the LongBoard and actually also the Carbide 3D controllers can't process tool changes on their own, Shapeoko machines do it via their Carbide Motion g-code sender and our LongBoards can also do it via our gSender open-source g-code sender 👍

@archetypalMaker 8 ай бұрын

Nice video, what if the roughing phase takes the initial material out, what is the best place to setup the Z axis in this case? I just use the top of the material left but it feels like there is a better solution that I can't get my head around.

@SienciLabs 8 ай бұрын

If you know you're going to disturb the surface that you're zeroing from, you can always change the setting to "zero off the machine bed" (your wasteboard). Some people do this anyways, it's a per project/person preference!

@archetypalMaker 8 ай бұрын

Ah, perfect. I completely forgot about that option. :) @@SienciLabs

@SienciLabs 8 ай бұрын

So glad we could help! Happy carving!

@Miter5TrimCarpentry 6 күн бұрын

Hi Scott, What if we want to save our files in a SINGLE GCODE FILE and use a bit setter to automate the Z height when performing a tool change, can this be done with the SLB EXT while also be configured in gSender? Please and thank you in advance!! :))

@SienciLabs 3 күн бұрын

You can do this using the tool change functionality in gSender as is, or you can even customize this within gSender's tool change wizard to add in custom macro things that happen during the tool change. The SLB (SLB-Ext) is also capable of much more advanced tool changing stuff but we haven't fully leveraged it yet. Hope this helps!

@michaelsweet8327 5 ай бұрын

Can you please explain how you would do this if you did not have a touchplate? The first step in the process getting x and y to zero using the paper method is the mystery to me. Can you help? Thanks and Im hoping to try carving those Christmas ornaments when I learn this!

@SienciLabs 5 ай бұрын

Yup, keeping in mind that you'll be "eyeballing" your bits location if you don't have a touch plate. There's nothing wrong with dong it this way, a touch plate just helps eliminate the guesswork. -Load your first bit into the router. -Move the router down until it's close enough to the material surface that you can line it up by eye for X and Y in relation to the material -Grab a piece of paper and slide it between the bit and the material -Using the "precise" jog setting, start lowering your Z axis while simultaneously sliding the paper back and forth just a little -When the paper starts to get pinched between the bit and the material you'll feel the paper not sliding as easily until it can't slide at all -At that point stop lowering your Z axis, click "zero all" Hope this helps, please share whatever you make to the socials so we can all see!

@michaelsweet8327 5 ай бұрын

@@SienciLabs Thank you for the reply! So, if I start with a 1/4” straight bit, move to the lower left corner, bring t he bit down and lower to paper as you said. I would then zero all? So my x y and z are all zeroed out there? I thought I would have to bring the bit to below the workpiece on each side then zero x amd y. Sorry, a bit confusing for this grandpa, but Ill give it a shot! Thanks again!

@SienciLabs 5 ай бұрын

glad we could help! If you run into any trouble let us know! Good luck!🍀