No video
Bass Boat Hatch Lids Hinge Rivets Repair Ranger 620vs
Рет қаралды 3,907
Күн бұрынThis video is all about fixing the hatch lids aluminum hinge rivets on my Ranger 620vs.
Rivets used :
McMaster Carr # 97525A510
18-8 Stainless Steel Blind Rivets
Domed Head, 3/16" Diameter, for 0.376"-0.5" Material Thickness
@TomPamLandry 4 ай бұрын
You said there is about 1/2 inch between the double walls of the lid. The drill bit looked longer than that. Did you drill through both walls? Did the new rivets go through both walls? A shot of the under side of the lid when completed would have been nice.
@kevinbucner2739 4 ай бұрын
The rivet goes through one wall and hole is through one wall only. You don't see the rivet on the other side.
@greigbw Жыл бұрын
Why not just use sheet metal screws instead of rivets?
@kevinbucner2739 Жыл бұрын
If you will drill new holes you may be able to use screws but using the same holes, screws won't hold , and second the material is not thick enough to hold screws
@jonathandelisle531 15 күн бұрын
What size stainless steel rivets did you use?
@thelosttruckdriver6622 9 күн бұрын
You deaf? Maybe have the volume down? @@jonathandelisle531
Bass Brothers Fishing DMV
Рет қаралды 33 М.
Bass Brothers Fishing DMV
Рет қаралды 17 М.
Bigwater Fishing
Рет қаралды 4 М.
Derek McJonboat
Рет қаралды 10 М.