Had to do it a couple of times. Bit nerve racking doing it but it works a treat!

Thanks mate….. sometimes you’ve got to do what you’ve got to do

🤣🤣🤣….. love it mate… We’ve all done them jobs where the whole floor is rotten to the core!!!!

Yep, we spoke and they were going to if this didn’t work. I’ve done it a few times over the years and it’s never been an issue👍🏼👍🏼

Thankyou buddy 🙏🏼🙏🏼

Thanks for watching mate 👍🏼👍🏼

Thanks Sam…. Yer it all went to plan😉👌🏼

Thanks pal, yer it’s getting there now

Thanks mate…. Hope your well mate

Thanks mate…. Tilers in this week so should be making progress

Thanks Jason 👍🏼👍🏼🙌🏼

Yep a godsend

Thanks Scott 🙏🏼🙌🏼

Cheers mate, yer I think I will pick a set up tomororw👍🏼👍🏼

Thanks buddy 👍🏼👍🏼👍🏼

Thanks Ben 🙏🏼🙏🏼

Then you haven't watched "Plumb like Tom", gritty as real world stuff. That said you Mark does a great job every time, can't fault him, took balls of steel to cut that pan.

Thanks Fred 🙌🏼🙌🏼

Thanks Rick…. Yep straps is a good shout to be fair 👍🏼👍🏼👍🏼

Thanks mate, make sure you do buddy 👍🏼👍🏼

Thanks Mike…. Hope your well buddy 👍🏼👍🏼

Thanks Tom 👍🏼

Thanks mate…..🙏🏼🙏🏼🙌🏼🙌🏼 Hope you well mate

Thanks mate….. gotta do what you gotta do sometimes 😉

Thanks mate…. I’ve never worked a day in my life without a set of kneepads….. first thing my boss said to me on day 1 of my apprentership 🙌🏼🙌🏼

Thanks mate…. Tiling on day 2😮😮😮😮

Never seen it before, seems a decent product to be fair 👍🏼👍🏼👍🏼 Just waiting to use some C3PO 😉

Always look after your knees

Thanks Jeff👍🏼👍🏼

Do it mate….. just take your time, use a proper disc and all will be well😉😉👍🏼👍🏼

You gotta do what you gotta do sometimes 😉👍🏼👍🏼

Thanks buddy

Do one pipe at a time buddy 😉👍🏼

Once you’ve done it once it’s all right, 😉👍🏼

Hahaha….. everyday is a school day. You know what it’s like mate, we have to do what we have to do sometimes

Thanks buddy

Thanks mate….. yep the first time I ever did it I was very nervous, now I know what it’s like to do it’s not an issue, just make the customer aware👍🏼👍🏼

@@MJTiffPlumbing Well done again

Thanks Mark 🙏🏼🙏🏼🙌🏼

Soldered it buddy👍🏼👍🏼

Thanks mate 👍🏼👍🏼

Yer I’ve seen that about

So many people have said that…… it’s not as bad as you think, try it on one you take out😉😉

No he’s not🙄🙄 My electrician will go in the roof and connect the down lights….. as that’s how they do it…. Always have done.. They know what there doing buddy😉

@@MJTiffPlumbing seems a lot of effort to have to go into the roof. If the ceiling was plastered but leaving the wire rails coming through (how I’ve seen other plasterers work), then the electrician could have fitted off within the bathroom and not have to get into the cramped roof space 😂

Tell me about it mate, felt like I wasn’t getting anywhere… Blade was a ceramic/porcelain one from Screwfix 👍🏼👍🏼

I took most of it off with a scraper……👍🏼👍🏼

Wallpaper steamer & a scraper, gets old adhesive off, I've even used an electric heat gun.

@@davec1410 nice!!!

Just spray with water and let it soak in..scrapes off like butter

Also dont have problem of the flexi pipe or pan pack hitting the boxing top corner

It can be very handy

Thanks mate….. Yep the holes would be tighter however sometimes it’s good to have a slightly larger hole for a bit of movement and I will always fit talon pipe covers over these pipes anyway so it’s not an issue. Nothing worse than tight holes that you have to then start chipping out and run the risk of breaking 😉 Bungs are from Toolstation I think mate

I asked the question and apparently they do make them👍🏼👍🏼

New ceiling up mate… you would never know😉 Yer I’ve always wore kneepads from my very first day of my apprenticeship, my boss at the time said look after them and I have👍🏼👍🏼

Always use 18mm ply myself , sand and cement😀

Thanks mate, looks so much better, tiler loved it as it looked better and customer loves it aswell…. Everyone’s a winner

Always look after your knees….. my boss when I started my apprenticeship said tht to me on my very first day and I don’t think I’ve ever had a day not wearing knee pads…🙏🏼🙏🏼

Cutting the pan out, I’ve done it a few times and you’ve got to do these things sometimes. Tray of the base was to get it lifted slightly so it works with the tiling and gives a slight more fall👍🏼

It’s just a case of setting it to position and turning the waste trap into the body….👍🏼👍🏼

As said in the video…. The tiler is tanking it all when he starts…👍🏼

No mate it’s all good buddy 👍🏼

Done it so many times, just use a good disc and take your time 👍🏼👍🏼👍🏼

Yes mate😉🙌🏼🙌🏼🙌🏼

I suggest you take a look on the Mapei tutorials buddy, they show it with the tray all ready in……. But thanks for taking the time to watch the video, then taking the time to type this comment…. Even your not perfect it would seem 🤔👍🏼 Good job we ain’t using Mapei anyway, it’s not a great product…

@@MJTiffPlumbing I'm not perfect. Agree on this. Please take the time and read again my comment. Waterproofing ( Mapei style ) , not necessarily Mapei. If because of the movement, and there will be some movement, as you expect on wooden structure, this seal around the tray will split over time , then the water will go behind and damage whatever is under this tray. It's not rocket science. I'm using common sense. Been doing this nearly 20 years. And to be honest I never watch tutorials of any brands, just using common sense. So far this never let me down. And I didn't want to play Mr clever man. Just sharing my opinion. Don't take it to seriously " mate " 😉

@@gienekpaa4892 Appreciate that mate….. in 26years of being in the trade myself I can honestly say I’ve fitted hundreds of bathrooms and NEVER had an issue… at all. Thanks for watching and commenting…. I work to a tried and tested formula that’s done me well for 26 years 👍🏼👍🏼

Oohhhh… I might try that one day mate 👍🏼👍🏼

It’s fine mate, done it plenty of times over the years with zero issues👍🏼 Thanks for watching

Real world plumbing……😉

Thanks mate… done it a few times over the years, just used a porcelain disc👌🏼👌🏼

Exactly how back to the wall pans work mate 👍🏼👍🏼 Thanks why you always use flexi pipes on the cold and the waste

Thanks Logan My trousers are from Bisley Workwear and they are hands down the best trousers I’ve ever had, way better than Scruffs (which skate very good) and Snickers (which are imho rubbish)

Cheers mate, will have a look 👍

Thanks mate 👍🏼👍🏼🙌🏼🙌🏼

Thanks mate….. to be honest I’ve never had an issue doing it, these pans are bloody solid

Not an issue at all….. some come with knockout side panels

Safety glasses are from Unilite…… hold fire as I will be getting a discount code for all UNILITE products very soon to pass onto all my channel supporters 😉👍🏼👍🏼

Thanks mate…. Never had an issue in years of cutting pans like this. 👍🏼

Moisture board is around £14 a sheet I think

If they've had any sense they would have kept a record of the measurments so they can cut in the correct places.

Thanks mate…. Timmy Mallet…🤣 The Sparkys work out exactly where the cables are so know what the measurements are for when they come back 👍🏼👍🏼 I will record it and add it to the video😉

Oh mate those showers…… as you will know they are SOOOOO complicated, glad my video helped on it mate. Second fix it a nightmare aswell🙈🙈

Thanks Derek 🙌🏼🙌🏼👍🏼

🤣🤣🤣

Masking tape leaves a nice edge 👍

When Dixon tiles the boxing in it will be even nicer😉

He’s put his prices up hope he told you 😉😂😂

@@jamessemple5072 🤣

Good advice mate… Thankyou 👍🏼👍🏼

Yep however the suite was supplied by the customer…👍🏼👍🏼

Great job tho, keep the content comin 👍👍

Explain what looks rough???

No where near enough room to do that and get 2 wastes and also connect back into the vent…

Evening mate🙌🏼🙌🏼

@@MJTiffPlumbing Evening Bud 🤘😎🤘🫖☕️🍰

So many different names🙈🙈🙈

@@MJTiffPlumbing poll time? See what your follower think?

Window was wide open👍🏼

Completely agree with that mate….. 👏🏼👏🏼 Good job my tiler is spot on and never ever had an issue in 20+ years 🙌🏼🙌🏼

I do my own tiling bud, only time I install a tanking kit is if the manufacturer of wetroom specifies- in order to guarantee their warranty. Just seems pointless to me tanking things- if water gets behind the grout or tiles there is a huge problem so need to start again anyway 🤷‍♂️👍 Great video as always mate, really enjoy watching people living the dream like me 🤦‍♂️🤣👍

@@benradley4895 Thanks mate… 🙌🏼🙌🏼 glad you enjoyed it

Would hardie backer be better for all this ? I know it is lovely to cut but nothing gets through it

@@user-yw6qb9tt7t Yep Hardie Backer is an option…… either or is just as good imho

Plenty of companies do it, they will even cut them for you if you ask…..