BaumaLight MP360 Mulcher

Рет қаралды 76,343

Күн бұрын

We're seeing more and more interest in the idea of a mulcher all the time, we sell many of them on the front of very large compact track loaders like Kubota's SVL97, where we're adding cooling packs on the back to deliver all of that hydraulic horsepower down to a very aggressive drum with big teeth. This, though, is constructed a little bit differently. BaumaLight still refers to this as a mulcher and it does a similar job. But there are some differences in its construction that are going to allow it to work on the back of a small tractor. Where those big compact track loader mulchers generally have big aggressive teeth that are going to go and take chunks out of the wood. This uses these much smaller ones so that you're a little bit lower horsepower is applied over a smaller area, allowing this to go and work its way through and mulch that wood up.
Timecodes
0:00 - The Demand for Mulchers
1:00 - Differences of the BaumaLight MP360
1:59 - Carbide Teeth
2:54 - Drum Rotation and Debris
4:06 - Our Setup
5:03 - Brush Size
6:17 - Our Job Today
6:43 - Running the Mulcher
8:58 - Available in Inventory
800.222.3373 | www.messicks.com | Parts Hotline - 877.260.3528
Kubota Parts - www.messicks.com/vendor/kubota
New Holland Parts - www.messicks.com/vendor/new-ho...
Case IH Parts - www.messicks.com/vendor/case
Service - www.messicks.com/schedule-service
Sales - www.messicks.com/attachment/c...
Messick's Merch - www.messicks.com/part/departm...
Kubota Merch - www.messicks.com/part/departm...
Toys - www.messicks.com/apparel

Пікірлер: 83

@williamlocklear1283 Жыл бұрын

What I really like about Neil is that he tells you both the good and the bad about any product, love the honesty but not a good trait for a salesman trying to move product. :)

@smanjik 2 жыл бұрын

Shingles look better at this location than at the previous store. congrats on the expansion!

@stephengmeiner3264 2 жыл бұрын

I love these implements. I’ve seen tractor time with Tim use his many times and think they’re awesome. I wish you could rent these! I need one for a week but can’t justify spending $10,000 to buy one. Every tractor dealership should rent these in their fleet

@hugostiglitz8465 2 жыл бұрын

It would be cool if United Rentals. Sunbelt or other had these..they would probably spend alot of time in for repairs from people hitting rocks etc.

@RCPSU4 2 жыл бұрын

It'd be good if they did. One thing I wish Baumalight could use to improve the attachment is making it quick-hitch compatible. The 1p24 stump grinder already is.

@topbuilder3790 Ай бұрын

I think the issue a a rental store would be the teeth. You know how everything you rent is dull? This machine has about $900 worth of teeth on it if there are 60 of them. They say 3 rotations, my experience has been 2. They can usually be sharpened a couple times. Unless you have rocks... too many variables for a rental unit I would think.

@robe4074 Жыл бұрын

Bom trabalho, ótimo conteúdo. Fiquei surpreso com a faca circular e as 1800 rotações. Parabéns

@wolflord256 2 жыл бұрын

The one time I used one of these I was highly advised to have a loader on the tractor and keep the bucket down and angled as a deflector to keep things from being shot too far directly out from under the front. Does also mean that you need to pay attention so that you're not just dragging a chip pile with the loader however.

@tommybounds3220 2 жыл бұрын

Thank you for the video

@madtater5948 2 жыл бұрын

thanks for sharing this video it would really help if the operator was double jointed in his neck I would like to see a front PTO driven tractor uses piece of equipment

@BG-vq9fd 2 жыл бұрын

Those things are awesome..

@justaddwata 2 жыл бұрын

Cant say I am any more convinced this thing would do any better a job than a quality brush hog (at least for 99.8% of clearing). Only a brush hog would not make me cry after hitting the countless granite rocks hiding among the brush the way those fragile (overpriced) carbides would.

@CHRISINMCNEILL 2 жыл бұрын

Neil thanks for the videos! Keeping them basic helps a lot of new tractor owners like myself. MX5400 Hydro trans. If you get time could you touch on foam filled tires?

@audrybella6405 Жыл бұрын

Note the skid pad on the left front of the implement (couldn't see from this video if there is also a skid pad on the right front of the implement but assume so). There does not appear to be any skid pads on the rear of the implement. Tells me the manufacturer expects this implement to be used driving forward and not in reverse. If I bought one I would fabricate a guard on the machine itself to deflect flying debris down towards the ground. Something similar to what most rotary mowers have on their front and/or rear. Thanks for the useful review. Much appreciated.

@fyrman9092 2 жыл бұрын

Tractor Time with Tim has several videos of the mulcher in action.

@silverbackag9790 2 жыл бұрын

I've been considering one of these...it seems like something you'd use a whole bunch at first, and then sparingly thereafter. I'd say it would be something to rent, but no one has them to rent (and the rental places near me suck anyway. It's 45 miles to a decent rental yard).

@roweinnovation 2 жыл бұрын

Careful on right of ways. I cleared those and older lines not always marked. Could cause you some big money. Just stay safe. Walk first

@Hugh_Jarsole 2 жыл бұрын

I'd be interested to see a side by side comparison in the same test area between this and a flail mower with heavy hammer knives

@alexxiv14 2 жыл бұрын

i would as well

@yourchava 2 жыл бұрын

heavy hammer flails are beast for sure,

@Hugh_Jarsole 2 жыл бұрын

@@yourchava agreed, I think it'd probably end up that a hammer flail is better finish wise for most stuff under 3" and this can power through stuff up to 5" but at the cost of a nice finish

@nervousordo 2 жыл бұрын

That's a lot of little bits for such an awesome implement. 🤣

@vincentleblond8951 2 жыл бұрын

I like when you use the mx 6000 to make video. Would love to upgrade from a bx someday

@JCWren 2 жыл бұрын

Won't take long operating in reverse before your back gets torn up from being twisted around like that. A swivel seat would be nice.

@OTAlucard 2 жыл бұрын

Yeah I wonder if there's anyway to have a seat that you can work from the side or something. So you don't have to twist your body so much to look back

@johanneslaxell6641 2 жыл бұрын

Why? Front three point hitch ańd pto 👍🏽. My wery old Kubota B7100D has a front frame (lift and turn) and a pto for snowblower use. But yes, I know about reversing hours a day at work plowing snow between houses with a blade behind the tractor (Valmet/Valtra 365). Kubota is nice, but I would really like a Fendt 211...

@hugostiglitz8465 2 жыл бұрын

I think your neck would take the most abuse..I would just put a loader on the front and drive forward with bucket low so any rocks etc would be discovered.

@mattman6759 2 жыл бұрын

Be nicer if tey made front mount pto tractors like the european models.

@johanneslaxell6641 2 жыл бұрын

@@mattman6759 One thing could be a little unpleasant though. It could throw rocks and stuff up on the driver. In this configuration the bigger wheels in the back and the large axle/transmission shields the driver a little more. Or so I think anyways... And then there is the question regarding the front axle load. The stress on the frame/axle could need a "thougher" tractor?

@dantabler9301 2 жыл бұрын

Hate to be safer sally but seriously eye and hearing protection

@workingmanrondoyle3287 2 жыл бұрын

Good demo Neil, I'm just wondering if it's possible catching something hard if that mulcher can throw a object through the tire under pressure. 🤔

@ryanbaker414 2 жыл бұрын

Short answer is it is possible. You can use this on small standing trees that can be sucked under the tractor and pushed at good speed to the front of the tractor. It is a great machine. We have the 348 and I would recommend them.

@Flyingdutchman586 2 жыл бұрын

You can easily puncture a tire with the right piece of wood. Have done so.

@sstelmack 2 жыл бұрын

I run over 2" saplings with my 48" flail mower on a B2301 without any problems. Might be a bit slower than this thing, but it works and was only 1700 bucks.

@justin51986 Жыл бұрын

i was thinking the same. i run over 3" trees with my $250 bush hog i found on marketplace lol

@carlandrews5810 Жыл бұрын

That's not a mulcher. I would want one to chew up piles of brush and wood, left over tops from logging, etc, into chips

@jburch1544 2 жыл бұрын

Your neck will hurt quickly operating this implement.

@scottsandoval6443 Ай бұрын

Make sure you wear your PPE especially safety glasses?

@samuelbonacorsi2048 Жыл бұрын

Looks nice, I’ll say two things based on my experience. Be very careful of flying debris - wear safety glasses or better - a cab. Also, I might be getting old but about 20 minutes of looking behind me and it’s no longer a fun job. That said, these are very nice for cleaning things up.

@n4csgchris389 2 жыл бұрын

you going to give a tour of the new place? nice looking implement

@MessicksEquip 2 жыл бұрын

When we are moved in.

@DJC995 2 жыл бұрын

Hi Neil Nice are They sold in England Thanks

@ogdooglehowser1317 2 жыл бұрын

im from florida, any idea if this is good for shredding up saw palmetto?

@chiefkyle1098 Жыл бұрын

Zombie apocalypse will require the track loader version.

@reeceedwards2509 11 ай бұрын

Will it work on my mf 282 tractor non hydro static ? Thanks

@jimmcknight3021 2 жыл бұрын

I was surprised to see the difference between a hydrostat and a gear driven transmission. But what about tractors that have the power reverser or in Kubota language I believe it's called the GST? Also on a hydrostat I have seen tractors get overheated when doing heavy brush cutting and the gear driven don't have near the issues of getting too hot.

@MessicksEquip 2 жыл бұрын

Gst would have the same issues, moves too fast. Overheating a hydro is very uncommon, this is very easy work for it.

@theroc68155 2 жыл бұрын

Dude, where is the eye and hearing protection?

@thedd13ram 2 жыл бұрын

We've got a mulcher where I work. I can not remember the brand name of it for the life of me. We put it on a Cat 299D2 two speed skid steer with a I believe a 15,000 pound warn winch on the back of the machine. It sounds like you are tearing the world up when you cut down a small tree with it. Edit: mulcher is a Denis.

@tristanbaldauf3770 Жыл бұрын

when did Mac from Always sunny get into tractors?

@stevenbell4053 2 жыл бұрын

It will cost a small fortune to replace all those carbide teeth and sharpening them will take an age. No sure you mentioned that!

@briankirwan9588 2 жыл бұрын

Are those green teeth stump grinder teeth on the drum?

@tessiechanp 2 жыл бұрын

green teeth H3000

@waynederby4684 2 жыл бұрын

Does any company make skid plates for tractors? Not just the little BX series. I've seen some for them. I am looking for plates for L3800 & L6060. Seems that would be a nice add on feature for Kubota to make. Either Polly or steal.

@MessicksEquip 2 жыл бұрын

Not for the bigger tractors, the undersides are pretty rugged.

@waynederby4684 2 жыл бұрын

@@MessicksEquip When you work in the woods like I do, 70 acres you would most likely think twice about that and probable reassess your thinking. Believe me sticks can get up into the impeller easily!!! Even with 15" clearance.

@stevesmith-wc2gb 2 жыл бұрын

I Would love to see one attached to a 28hp tractor

@dennisbarrett6148 2 жыл бұрын

Stupid question. Would it be helpful or even practical to swivel the seat 90 deg to the right?

@MessicksEquip 2 жыл бұрын

Some tractors swing 20 degrees, not this one though.

@quinn860 Жыл бұрын

Can you not put guards on mulcher that drop down rather then modify tractor

@DKWalser 2 жыл бұрын

Would it be possible to install a series of heavy drop chains on the discharge side of the mulcher? It would seem like an easy way to protect the underside of the tractor.

@Flyingdutchman586 2 жыл бұрын

Does not help much, some. Have tried heavy rubber wears away.

@warrenstemphly5756 5 ай бұрын

Haven’t seen this used on anything other than table flat land.

@yourchava 2 жыл бұрын

my neck would be sore driving in reverse for sure

@hansdreisbach9520 Жыл бұрын

I watched the whole video to see how it did with the woody stuff and sticks and you never showed it

@kylerayk 2 жыл бұрын

I think I would have designed the tooth holders in a helical pattern instead of a straight line axially.

@MessicksEquip 2 жыл бұрын

They are offset

@truslyd 2 жыл бұрын

Guys running ballistic glass in their ctl's...I can see some fatalities with this setup...cool concept tho but with an open statio?..damn

@MessicksEquip 2 жыл бұрын

It's actually much better. I feel much better running this than a CTL.

@truslyd 2 жыл бұрын

@@MessicksEquip I gotcha..I just know ppl that use those fecon forestry heads and they been unnerved by some o the debris that bad boy has slung at em...

@Richard31406 6 ай бұрын

couldve uses a rotary mower for the weeds......

@onecarahead4470 2 жыл бұрын

Neil, you need to do videos about Tim trying to do nothing but negative videos about the tractor he bought from you.

@MessicksEquip 2 жыл бұрын

I don't watch most of Tim's stuff. Was there much besides his silly obsession with a 30hp tractor not fitting a CV joint PTO shaft?

@barelystablefarm7151 2 жыл бұрын

It's not Tim's fault the 2038 is a superior machine :P

@RCPSU4 2 жыл бұрын

The LX he got from Neil runs the little brother of this machine (MP348) very well. Ballast wise he did have the loader on, but a grapple in place of the bucket.

@Flyingdutchman586 2 жыл бұрын

@@RCPSU4 A roller fabbed to the trailing edge also works well. Esp in more bare soil.