2015 FORD KUGA TIMING BELT REPLACEMENT & 41K MILES. BUT CLOSE TO 10 YEARS OLD BETTER SAFE THAN SORRY

No video

2015 FORD KUGA TIMING BELT REPLACEMENT & 41K MILES. BUT CLOSE TO 10 YEARS OLD BETTER SAFE THAN SORRY

Рет қаралды 11,805

baz meredith 🤙

3 ай бұрын

Пікірлер: 41

@paulas2610 2 ай бұрын

Looks like a good old reliable PSA engine

@cypeman8037 2 ай бұрын

Nice to meet you at Harrogate. Jimmy's a quiet lad isn't he.

@bazmeredith 2 ай бұрын

He's really busy his phone doesn't stop

@markrothwell4193 2 ай бұрын

Yes mate quality work as usual. I had a 407 with the plastic sump and when a local garage service it yes they cracked the sump done a repair on it plastic weld if i remember.

@colinbrown3364 2 ай бұрын

A nice clean engine bay to work in. 👌

@MX5MAN4 2 ай бұрын

great vid baz you make the changing of belts so so simple :)

@the_retired_mechanic 2 ай бұрын

Great video as always Baz. Get it sent

@MadMurdock69 2 ай бұрын

Just had my belt done on the exact same engine mondeo 2013 2.0 tdci where the previous owner said it had been done but no proof.. My local garage said the belt they removed was the original..👀 Lucky they said hence weren't in the best condition..

@markbro4427 2 ай бұрын

A friend got his Kuga done for £250 in a local garage....He's a retired mechanic himself and still does a bit (more mot work now). The garage did him a good deal as he sends them alot of work that he doesn't want.

@MadMurdock69 2 ай бұрын

@markbrock4427 Only cost me roughly the same both parts & labour... Other garages we're quoting silly prices..

@jimmybyrne4978 2 ай бұрын

I have a 2014 Kuga same engine and when I asked about the timing belt being included in the current service they told me it was a timing chain and wouldn`t needed to be replaced.....After looking at this video I`m changing my garage. Some people just want to charge big for doing the easy jobs.

@MadMurdock69 2 ай бұрын

@jimmybyrne4978 It's 💯 timing belt.. Recommended every 120k miles or 10years whichever the sooner.. Yea some garages hourly fees labour wise are just extremely expensive hence I shops around..

@garynewell6947 2 ай бұрын

outstanding content baz great work

@davidmehlhorn726 Ай бұрын

I’ve tackled almost every job on my cars from brakes to shocks/springs, injectors etc etc but I draw the line at tackling the timing belt. That’s one for the pros.

@MikeK-NIreland 7 күн бұрын

would have been nice if you could of shown a more detailed view of where to insert the locking tool at the flywheel ??

@StephenFacer 2 ай бұрын

Thanks baz great to meet you today great job done on car,😊

@bazmeredith 2 ай бұрын

Thank you buddy and yes it was a pleasure!!!!

@Lexusman65 2 ай бұрын

Another awesome job done by a professional.Well done buddy.

@stephenanderson439 2 ай бұрын

Get yourself a laser 5750 or similar under engine support ,so much easier than blocks of wood😀

@rolandk3450 2 ай бұрын

Please give more details about the car next time - for example 1.5 litre Duratorq (diesel) to avoid misunderstandings. And perhaps show in more detail how and where the flywheel is blocked if necessary, what is required to do this, remove the starter etc. Otherwise I can only praise you for your work.

@bazmeredith 2 ай бұрын

I do mention right at the start of the video when engine it is buddy... And yes totally agree but it is hard making content while doing the work, but all these pointers you've given will be taken on board for next time 🤙

@derekgb3780 2 ай бұрын

Good job

@peterarries7879 2 ай бұрын

Nice one 👍🏻

@mikejba 2 ай бұрын

Top job Baz, you're a master. Another car well sorted 🤙

@Jack_JJS 2 ай бұрын

Great video as ever Baz 🤙

@ritchieschofield1185 2 ай бұрын

Very similar to my focus ST Engine. dw10 peugeot. I think its a great engine. Mines on 64k but 8 years old gonna do it this year i reckon as those water pumps are a bit problematic.

@paulas2610 2 ай бұрын

That brake fluid may look clean but it’s green, yikes 😱

@scotspie501douglas7 2 ай бұрын

great Video Baz is there no timing belt you have done what jobs do you fear

@bazmeredith 2 ай бұрын

I don't fear any job buddy theres nothing I won't tackle...

@simonbailey2151 2 ай бұрын

He’s Chuck Norris with a torque wrench.

@oth567 2 ай бұрын

How difficult was the crank bolt to remove? I've heard they can be mega tight, I need to do mine 🙈

@bazmeredith 2 ай бұрын

No problem with the Milwaukee buddy

@atkins.8832 19 күн бұрын

Hi Could give me a price on cambelt & water pump? 64 plate 2.0 TDCI kuga

@J88AGT 2 ай бұрын

here first 👍

@marktelfer6654 2 ай бұрын

Smashed it again but I have a question if you don't mind? My wife has a 2014 audi a3 8v and the passenger rear window regulator has gone. Easy enough to fix but I am wondering is there a special tool or trick to getting the window out of the regulator.so you can then remove the regulator its self? Thanks Baz

@bazmeredith 2 ай бұрын

I can't remember off the top of my he'd buddy sorry

@marktelfer6654 2 ай бұрын

@@bazmeredith no problem thanks 👍