Tesla Model Y - Blackout Emblems with HyperDip

No video

Tesla Model Y - Blackout Emblems with HyperDip

Рет қаралды 42,410

3 жыл бұрын

The Tesla Model Y was the first Tesla to come with blacked out trim. As Tesla continues to move towards a full lineup of blacked out cars, it is interesting that they still come adorned with chrome emblems, front and back.
Although they don't look terrible, they could look better in black. HyperDip has provided us with an emblem blackout kit to show how their new product stacks up against traditional Plasti Dip.
HyperDip is a DIY application process that comes in a Satin finish and 2 Gloss finishes. Simple spray on, peel off application means most anyone can do this. The best part is that since it is not a paint, it wipes right off, so no longer do you need to worry about overspray.
I am very pleased with how this turned out and love the new look of our Tesla Model Y. We have completed that full blackout look and the car feels much more complete.
www.dipyourcar.com
Code "Bearded" for 10% off your order
Join this channel to get access to perks:
/ @beardedteslaguy
Follow us:
Twitter @BeardedTesla
/ beardedtesla
Instagram BeardedTesla
/ beardedtesla
Accessories
Floor Mats, 3DMAXpider use code BTGMAX for $10 off - www.formytesla.com/product/ma...
DIY Ceramic Coat use code BTGCC for $10 off - www.formytesla.com/product/na...
Mattress use code BTG for $10 off - www.formytesla.com/product/po...
Hansshow Power Frunk use code BTG for 15% off - www.hautopart.com/product/mod...
Matte Screen Protector - amzn.to/3o7IaLN
Clear Screen Protector - amzn.to/35bhD7E
Center Console Cover - amzn.to/31oIYlO
iPad Holder - amzn.to/2YLBbgZ
Mobile Connector Organizer - amzn.to/3iiUkOP
Car Seat Covers - amzn.to/2Vsc9kX
Filming Equipment
Canon M50 - amzn.to/3lqNfww
Sigma 16mm Lense - amzn.to/2SDHE9E
128 GB Pro SD Card - amzn.to/3nv242V
GoPro Hero 8 - amzn.to/38mwltO
GoPro Tripod - amzn.to/3dPO7GK
GoPro Media Mod - amzn.to/2YJlbMl
GoPro Suction Mount - amzn.to/3eI67UO
Microphone - amzn.to/2ZmZlgN
As an Amazon Associate I earn from qualifying purchases
If you are ready to order your new Tesla, don't miss out on your free 1,000 miles Supercharging by using my referral code - www.tesla.com/referral/justin...

Пікірлер: 183

@HerseyChris 3 жыл бұрын

Bearded. Not sure what your job is, but please consider a career in audio book reading. Your voice is vey clear and calming.

@BeardedTeslaGuy 3 жыл бұрын

ha! interesting thought.

@don.newlon 3 жыл бұрын

I love this guy. He's the Bob Ross of Tesla.

@BeardedTeslaGuy 3 жыл бұрын

No mistakes, only special little trees

@kylek3179 3 жыл бұрын

Nice job! Just ordered a LR MY yesterday. The blacked out emblems and DIY PPF for the front and rear doors is top of list after delivery. Appreciate the great content and deals you are able to pass along!

@BeardedTeslaGuy 3 жыл бұрын

Cheers!

@Wankidy 3 жыл бұрын

I have watched so many of your videos and I was shocked to realize that I was not yet a subscriber. Thank you for the tip. My 2018 Model 3 will appreciate the new look.

@BeardedTeslaGuy 3 жыл бұрын

My shock is shared! Haha

@gruglly 3 жыл бұрын

Just picked up my 2021 Model Y today. Placed an order for the dip. Thanks for the video very well done.

@BeardedTeslaGuy 3 жыл бұрын

Cheers, congrats!

@diegofalcon9056 3 жыл бұрын

Ha! Funny you posted this today. I just received two cans of the hyper dip last night. Can’t wait to try it!

@BeardedTeslaGuy 3 жыл бұрын

HA, now you know how to do it on the Y! Enjoy it! I am happy with how it turned out.

@diegofalcon9056 3 жыл бұрын

@@BeardedTeslaGuy For sure. Thanks for the video!

@Cdior2234 3 жыл бұрын

@@BeardedTeslaGuy as sReeeseEe

@diegofalcon9056 3 жыл бұрын

@@BeardedTeslaGuy you weren’t kidding. This stuff is great! Easy to work with! Had a bunch of over spray, but it wipes right off

@mikecody87 3 жыл бұрын

You must read my mind. Have been debating on ordering this for weeks. Thanks for the video fellow Indy Suburbs guy! Keep up the good work.

@BeardedTeslaGuy 3 жыл бұрын

Cheers

@robbergmann649 3 жыл бұрын

Nice job, as always!

@BeardedTeslaGuy 3 жыл бұрын

Thanks again!

@TonyPham-Creations 3 жыл бұрын

whoa very nice job there, thanks for sharing!

@BeardedTeslaGuy 3 жыл бұрын

Cheers

@BlackBirdieGolf 3 жыл бұрын

Great vid. I'll do the same when i get mines. 👍🏾👏🏾

@BeardedTeslaGuy 3 жыл бұрын

Cheers

@PersonalUseChannel Жыл бұрын

I put 3 brush coats + 7 heavy coats and it was too thick to peel off. The whole thing was peeling even though I was pulling away from the angle. On second try, I put light brush coat every 5minutes for one hour. it was much easier to peel off. It came out pretty good.

@BeardedTeslaGuy Жыл бұрын

Yea, depending on temp and humidity, the way coats go on will vary. Its not as simple as 1 way unfortunately. But, when you get it right, it looks great and stays! Never had a peel issue

@aeryndaxx6410 3 жыл бұрын

May have to give this a try on my logo's, good job!

@BeardedTeslaGuy 3 жыл бұрын

Super easy!

@bcar1ify Жыл бұрын

I was looking for something like this. Thanks.

@BeardedTeslaGuy Жыл бұрын

Cheers

@saiprasanth8278 3 жыл бұрын

My man! Thank you! Been looking for something like this for a while.. definitely giving this a try

@BeardedTeslaGuy 3 жыл бұрын

cant really mess anything up, and if you do, you just remove it. I am way happier with it than i thought i'd be.

@saiprasanth8278 3 жыл бұрын

@@BeardedTeslaGuy I’ve been wondering how this would hold up against car washes.. I do ONR+Beadmaker once every two weeks. Even if it lasts few months it’ll be easy enough to re-apply. Oh! New video idea- Tesla paint care and car wash tips/instructions

@brianbernstein7754 3 жыл бұрын

Looks great...well done!

@BeardedTeslaGuy 3 жыл бұрын

Cheers.

@qman66 3 жыл бұрын

I ordered MY yesterday. I'm down to try this

@BeardedTeslaGuy 3 жыл бұрын

Congrats to you! Fingers crossed for a quick and uneventful delivery!

@TomsTurboGarage 3 жыл бұрын

Love it man, thank you and well done!

@BeardedTeslaGuy 3 жыл бұрын

No problem 👍

@Kevinb144 3 жыл бұрын

BTG I really enjoy your videos, I’ve learned so much. I just took delivery of used 20 MY performance, with white interior so far I’m loving it. Thank for all the helpful insight

@BeardedTeslaGuy 3 жыл бұрын

Fantastic! Congrats! I hear 0-60 in 3.5 sec is good for your overall health

@mygt8a4re Жыл бұрын

Wow what a great explanation video! Very precise & understandable. Very much appreciated! Did you take speech courses? Your words are very clear, more so than normally heard on YT. Thank you for sharing!

@BeardedTeslaGuy Жыл бұрын

Haha thanks, appreciate you

@rkgsd Жыл бұрын

I found the Plasti-dip to not be quite as stretchy as this, but holds extremely well regardless of weather conditions.

@BeardedTeslaGuy Жыл бұрын

This held up great even in car washes

@grateful7839 3 жыл бұрын

Thanks Friend

@BeardedTeslaGuy 3 жыл бұрын

cheers

@waynebarringer7768 3 жыл бұрын

I’m not sure where the blackout craz is coming from. I love Crome.

@BeardedTeslaGuy 3 жыл бұрын

Lol, I’ve heard from a couple people that say the same. Something to the effect of “it reminds me of police cars back in the 80’s”

@st520 3 жыл бұрын

Perfect timing for the video. I had ordered my hyper dip package for my newly delivered Model Y, but was hesitant on spraying the emblems. Thanks for the tutorial. I had a question, though; how long of a wait between the dry coats in the beginning?

@BeardedTeslaGuy 3 жыл бұрын

5 min, they dry really fast since its not a wet application on the dry coats.

@ashegam 3 жыл бұрын

I looked into HyperDip and just couldn't justify the premium you pay over PlastiDip. On small projects like emblems etc. you can justify the premium for ease of use/clean up but imagine doing 4 wheels and using 7 coats of HyperDip, can you imagine the number of cans you would have to use? And did you see how easily it tore and you were able to clean it off? Now imagine that same material on your wheels, that level of protection is just not the same as PlastiDip. Again great for small projects, too expensive for anything larger. Great vid!

@BeardedTeslaGuy 3 жыл бұрын

Interesting perspective. Thanks for sharing.

@deej628 3 жыл бұрын

Same parent company as plastidip.

@kyleknopik7300 3 жыл бұрын

As someone that has this on the wheels, it actually works VERY well. The premium is worth it in my unbiased opinion. The kit is 5 cans for $80-90. People notice your wheels.... don't cheap out and get a cheap product that LOOKS cheap.

@steves1232 Жыл бұрын

how has it stood the test of time?

@83chanman 5 ай бұрын

Question, I believe I saw your Tesla has PPF on the front? If so, did the Hyperdip have any affect to the PPF afterwards?

@xforzaaxitaliax 3 жыл бұрын

Nice job! I was debating on doing the same, but abstract ocean has a direct replacement that looks really clean. I went that route and was a quick install on my white MY

@BeardedTeslaGuy 3 жыл бұрын

Sounds like it worked out nice. I love the contrast look being completed with black emblems

@xforzaaxitaliax 3 жыл бұрын

@@BeardedTeslaGuy same here. Something about a white car with black accents grabs my attention instantly. It’s amazing that in the 90s only the beater cars looked that way. Now it’s just so clean looking!

@JetFire9 3 жыл бұрын

Much better choice than the high-schooler-dip option.

@scotttang6229 2 жыл бұрын

I checked out Abstract Ocean and did not see that they have blacked out emblems for the Y. Am I missing something?

@ericgreen8570 2 жыл бұрын

@@scotttang6229 Tesla made them take the product down due to copyright.

@rdiaz206 3 жыл бұрын

I dipped the Y in Madi Gras Satin White

@BeardedTeslaGuy 3 жыл бұрын

Nice

@elmono3939 Ай бұрын

Little messy, but nice finish ! PS: Agree with comments below: radio voice !

@mikesamyn7054 Жыл бұрын

Well, I just ran across this video so I'm wondering how the stuff is holding up. I just got my model Y and I'm paying to have PPF professionally installed as I do not have a garage and I live in a dusty environment here in San Diego. They are actually removing the emblems to put the PPF on! Then re-installing them. They wanted to know if I wanted them blacked out and I said no. Actually, glad I did since I think DIYing the project with HyperDip looks like a better and cheaper option. So let me know how they are holding up.

@BeardedTeslaGuy Жыл бұрын

It held up fantastic, and I drove it through the Carwash frequently

@doc2w534 3 жыл бұрын

I tried to PlastiDip my new emblem on the back of my Model 3 yesterday. Because I didn’t like how the glossy black finish didn’t match the other matte finishes on my badging. It didn’t turn out well so I just placed an order for new badging in the correct finish. I’ve never had an issue with PlastiDip until this. This HyperDip seems to dry quick if you were only 10-15 min between coats.

@BeardedTeslaGuy 3 жыл бұрын

Supposed to dry about 5 min between coats, but that is weather dependent. So warmer temps, this will dry fast.

@Koffee_Kong 3 жыл бұрын

Where did you order the badging from? Tesla did a crackdown on sites selling badging etc last week. I’m trying to find a carbon fiber or gloss black T logos for my M3 otherwise I’m thinking of trying this stuff out that Bearded Tesla Guy reviewed.

@doc2w534 3 жыл бұрын

@@Koffee_Kong I bought a few on clearance from RPM and AbstractOcean after they got the cease/desist order last week. The new one I found on EBay from a highly-rated seller that probably was flying under Tesla’s radar. If these don’t work I will try the HyperDip on the red/black one I have on the car now from AbstractOcean.

@Koffee_Kong 3 жыл бұрын

@@doc2w534 ah ok. Smart to do that

@monkncook 3 жыл бұрын

I used plastidip for my emblem. It is exactly the same as this stuff,plastidip is $6 for black, $15 for red. Turned out perfect. My red emblem looks great against the white exterior. This hyperdip is too expensive and it looks to be the same as plastidip. Just use rubbing alcohol to clean, no need extra stuff this hyperdip includes.

@JM-cw2gf 3 жыл бұрын

Ya im with you. This hyperdip looks good, but ive not seen any difference except price when using plastidip. It looks like most of the extra cost for this kit is for the extra can, pre cleaner, tape, cloth and tool. I spent $6 on plastidip, had my own painter tape, own cloth, soap and toothpicks. So i dunno, while this kit is nice in that it provides evrything you need, you coiuld get away with doing this much cheaper just buying plastidip.

@stevek3737 2 жыл бұрын

How is it holding up over time

@marketsmove 3 жыл бұрын

Really curious how these hold up to washing and pressure washing. I obviously understand the common sense of not blasting them with the pressure washer but just curious about strength over a couple washes.

@BeardedTeslaGuy 3 жыл бұрын

Same. Need some time with it to get a good feel for durability

@Hildepedia 3 жыл бұрын

Yeah, I agree… Curious to see how that pans out To my eye , De badged looks the best, followed by black logos, followed by chrome logos. I ended up de badging my car, but my wife thought it might look better with the emblems back on. At least on the rear I had purchased vinyl covers for the chrome logos… And I ended up sticking it right on the paint. Looks great, don’t have to worry about my towel getting hooked on it when I’m washing it. I can’t speak for a longevity, but my gut says it will hold up well Also it was good timing, because I think Tesla is cracking down on other companies using their logos!

@kyleknopik7300 3 жыл бұрын

I literally did this on my emblems and my aero covers for my model Y to black them out. It's lasted very well so far for 6 months, many washes, power washing, AND winter. Huge fan!

@youtubesucks8024 2 жыл бұрын

FWIW I plastidipped my entire hellcat from red to white then black. Kept it for years even drove it through the auto wash monthly. Never had a problem, doesn’t tear or fade. The only trick is the prep and spray heavy heavy thick even flat coats.

@aaronrodgersisgod12 2 жыл бұрын

@@BeardedTeslaGuy curious to see after a year how it held up with pressure/hand washing?

@sunny051488 2 жыл бұрын

Have you washed your car after applying this? Does it hold up ok? Has anyone else washed their car after applying this?

@BeardedTeslaGuy 2 жыл бұрын

Washed it many times at the automatic Carwash

@trungdiep405 3 жыл бұрын

How and where do I order the accessories like the floor mat screen protection and mud flap.

@BeardedTeslaGuy 3 жыл бұрын

All in the description

@danb1a 2 жыл бұрын

Now, how easy is it take off the black from the emblems? I leased mine and I will have to take it off eventually, or it will have to come off even ion IO don't do it myself?

@BeardedTeslaGuy 2 жыл бұрын

Super easy, just peels off when you are ready

@MelencioParas 2 жыл бұрын

Awesome video. Inspiring! It looks like your front has PPF. So no adverse effect on the surrounding PPF when you peeled the dip? Even on the edge of where the PPF ends?

@BeardedTeslaGuy 2 жыл бұрын

Zero issues

@MelencioParas 2 жыл бұрын

@@BeardedTeslaGuy thanks for the reply

@dilbertnewton6864 3 жыл бұрын

Does this hold up on touch surfaces, like door handles?

@BeardedTeslaGuy 3 жыл бұрын

It’s supposed to

@meldzz70 3 жыл бұрын

Hi! How many Tesla cars can you use this kit for?

@BeardedTeslaGuy 3 жыл бұрын

a few at least

@boobiebug 3 жыл бұрын

Great job, i like this product... Did u miss inside the the letter A ???

@BeardedTeslaGuy 3 жыл бұрын

Did the best I could, left it as is for now. Very tight opening. I hear a toothpick can also be a good tool to use FYI.

@boobiebug 3 жыл бұрын

@@BeardedTeslaGuy yea that's what i would use doing that, i feel u did good tho.. 👍🏽👍🏽

@tailormeaway5872 3 жыл бұрын

Hey man...the pre-dip cleaning solution that the kit comes with....can it be used to clean other things off the car too? I.E. a bit of residue for example

@BeardedTeslaGuy 3 жыл бұрын

Possibly

@tailormeaway5872 3 жыл бұрын

@@BeardedTeslaGuy but would that mean it also wipes clean the ceramic and sealants too?

@josephregimbal5352 3 жыл бұрын

I just bought a radar detector and I’m trying to figure out how to wire it into my Tesla. I’ve seen a few videos of people wiring them into the rearview mirror/lights. Any ideas on how to do it or who could install that?

@BeardedTeslaGuy 3 жыл бұрын

Haven’t looked into anything like that. There is a 12v outlet in the arm rest of the center console. I’d start there

@JetFire9 3 жыл бұрын

Look on Telsa Motors Club for posts with DIY instructions.

@shoefiend 2 жыл бұрын

Just curious, how has the hyperdip held up since this video?

@BeardedTeslaGuy 2 жыл бұрын

I don’t have that car anymore but it held up great, even with going to the Carwash frequently

@NRV44 3 жыл бұрын

The current Model Y comes with chrome or black?

@BeardedTeslaGuy 3 жыл бұрын

Chrome emblems

@asitmc 3 жыл бұрын

does the same thing as plastidip, but seems much more expensive. What's the upside?

@BeardedTeslaGuy 3 жыл бұрын

It is a cleaner finish and holds up better. It's basically plastidip with a better formula.

@marque02 3 жыл бұрын

I looks amazing on the white ! Great job and great video ! I have a Metallic Geay Model 3 '21 so already comes with chrome delete and was looking into attempting this (also got a read emblem that spells " T E S L A " to swap from the original T logo. But its also chrome and was looking into the Hyper Dip. I guess my question is, if i don't like how it looks because its too dark ? Can i get the emblems back to original chrome ?

@BeardedTeslaGuy 3 жыл бұрын

Yep, you can remove the hyperdip if you don’t like it

@eTatsh 3 жыл бұрын

This man is too excited about this product lol

@BeardedTeslaGuy 3 жыл бұрын

I like it

@BlackBirdieGolf 3 жыл бұрын

What happens when you go through a carwash?

@BeardedTeslaGuy 3 жыл бұрын

Wouldn’t be very useful if it comes off in the wash

@jamesguan5096 2 жыл бұрын

Any suggestions on how to dip the chrome door handles?

@BeardedTeslaGuy 2 жыл бұрын

I guess you'd need to figure out how to remove them from the car completely to do that.

@jamesguan5096 2 жыл бұрын

@@BeardedTeslaGuy I guess in this case, the wrap may be an easier fix... Thanks for your reply!

@IdeaMusicKen 2 жыл бұрын

Can you do this on ppf or will it stain the ppf?

@BeardedTeslaGuy 2 жыл бұрын

Yes you can!

@ernest1091 2 жыл бұрын

Would you recommend ppf then ceramic coating and then emblems or a different order. I’m picking up my model Y tomorrow :)

@BeardedTeslaGuy 2 жыл бұрын

PPF, then Emblems, then Ceramic

@ernest1091 2 жыл бұрын

@@BeardedTeslaGuy thanks for the quick reply!!

@robertperez8877 3 жыл бұрын

Not sure what I'm doing wrong, but I tried your discount code, Bearded, a few times and it keeps saying it's not valid for the HyperDip wheel kit I'm attempting to buy at the dipyourcar website...

@BeardedTeslaGuy 3 жыл бұрын

Ah, the wheel kit is probably not linked for the discount.

@JaredSpink 3 жыл бұрын

Would you recommend doing before or after getting ppf?

@BeardedTeslaGuy 3 жыл бұрын

either, doesn't matter. May be easier to remove from paint than from corners of PPF?

@ravipali1997 2 жыл бұрын

Is it safe to spray on XPEL Satin PPF?

@BeardedTeslaGuy 2 жыл бұрын

yes

@mantajim2269 Жыл бұрын

Does it come off if using a power wash ?

@BeardedTeslaGuy Жыл бұрын

Nope

@willeumc512 2 жыл бұрын

is this safe to use over a 3m vinyl wrap?

@BeardedTeslaGuy 2 жыл бұрын

Yes of course

@imnotreallyhereokay4357 3 жыл бұрын

Can this be done after PPF ?

@BeardedTeslaGuy 3 жыл бұрын

Yes indeed! I have PPF on the hood.

@Nk68595 3 жыл бұрын

hey find a good spoiler?

@BeardedTeslaGuy 3 жыл бұрын

I see a lot of new options out there. Was starting to think about trying one out.

@Nk68595 3 жыл бұрын

@@BeardedTeslaGuy nice! I tried several different ones on Amazon, they don’t fit perfectly, I was concerned to order those from individual website. Please find one ASAP and review😜

@diegofalcon9056 3 жыл бұрын

@@Nk68595 I just ordered one from ThinSGO (Amazon). Real Carbon fiber for $199. We’ll see how it is in a few days.

@Nk68595 3 жыл бұрын

@@diegofalcon9056 nice dude keep us posted

@Koffee_Kong 3 жыл бұрын

@@BeardedTeslaGuy I am trying to sell mine. I got it from RPM Tesla and then we decided to buy a M3 instead of a MY so now here I sit with a brand new in box MY spoiler. Let me know if you are interested. Asking beat offer. Thanks for this vid. I may try this stuff out.

@tommyearllambert8051 3 жыл бұрын

Will this stay on in a car wash or pressure washer?

@BeardedTeslaGuy 3 жыл бұрын

It better! I have not tested it out on that yet, but it should.

@Nk68595 3 жыл бұрын

@@BeardedTeslaGuy lol

@dahveed284 3 жыл бұрын

I have already bought a can of Plastidip, but have watched these guys videos here on KZfaq. I'm not brave enough to do the tiny letters.

@BeardedTeslaGuy 3 жыл бұрын

Super easy!

@dypdyp Жыл бұрын

Does it last?

@BeardedTeslaGuy Жыл бұрын

Yes, all PPF materials are designed to last, although at different timelines

@naughtysauce4323 3 жыл бұрын

Can someone explain what he did wrong that the letter emblems didn't come out as good?

@BeardedTeslaGuy 3 жыл бұрын

More even coats would help. Those letters are really hard because of all the angles

@drewksidetour 3 жыл бұрын

What’s the difference between plastidip and hyper?

@BeardedTeslaGuy 3 жыл бұрын

Hyper is more durable and has a smoother finish

@drewksidetour 3 жыл бұрын

@@BeardedTeslaGuy I just ordered the aerosol can and have the other tools at home. I’ll use probably rubbing alcohol on the emblem or car guys spray to clean it

@Azndragon533 3 жыл бұрын

How does it look after car wash ?

@BeardedTeslaGuy 3 жыл бұрын

Has held up perfect. Many car wash visits

@J.W.W. 3 жыл бұрын

Dual motor emblem looks really crooked when you taped it off

@BeardedTeslaGuy 3 жыл бұрын

I see that too, but it’s actually just the angle of the lens and light.

@iPigee 3 жыл бұрын

So how does it look today?

@BeardedTeslaGuy 3 жыл бұрын

Still looked great a year later!

@kradwonders 3 жыл бұрын

Will this hold up in a car wash?

@BeardedTeslaGuy 3 жыл бұрын

We will find out over time. Shouldn’t be a problem though

@thespiceislife2082 3 жыл бұрын

3 days too late for the discount 😞.

@BeardedTeslaGuy 3 жыл бұрын

Oh man...well, at least you can see how to do it

@28green Жыл бұрын

For others stumbling on this video like I did, my recommendation is to NOT do this method and just buy black plate covers or replacement decals for a fraction of the cost and time. This is not as easy as it looks. It took me 3 attempts to get the front logo and I’m currently on my 3rd attempt for the back logo. The sides of the logo are easy but peeling between the top and bottom part of the logo is frustratingly difficult. It constantly wants to pull off the dip from the logos as well. I’ve tried pulling away, using the tool, thoroughly cleaning, low humidity, plenty of time for drying, it doesn’t matter. There is a reason they give you 2 cans of the stuff and a mile of painter’s tape. I wish I never saw this video. I blame myself for not looking for other alternatives before dropping almost $60 on this method.

@BeardedTeslaGuy Жыл бұрын

Wow, I’m sorry you had such a hard time with this. I thought it was really easy to do, and a lot of people shared the same. Make sure you are doing very light coats. 7-9 light coats should do the trick. Get a toothpick to help you remove excess that doesn’t peel off easily. Make sure once you get a flap started, pull away from the logo.

@28green Жыл бұрын

@@BeardedTeslaGuy Yeah, I don’t think drying is the issue. I’m doing 7 coats. I just can’t get the piece in between the logo off without pulling it off the emblem too. 3rd attempt on the back logo was a failure as well so we’ll go with attempt #4 tomorrow. What seems to help is making sure the small strip between the logo is attached to a larger piece so its easier to grab with the tool.