Bearing Service Santa Cruz Megatower | Dreambuild Service
Рет қаралды 11,907
2 жыл бұрынAfter a long and muddy season my Megatowers reartriangle needed a refresh very badly!
I'm still blown away by my new camera-setup. Can't wait to try it out for a riding video soon.
Videoequipment:
-Sony A6600
-Sony E 3.5-6.6 / 18-135mm OSS lens
-Panasonic Lumix g70
-Panasonic G Vario 12-60mm lens
-Lumix 25mm f 1.7
-Rode Videomic go
-Adobe Premiere Pro 2021
Many thanks to Jan-Luca for his outstanding videowork as well as the Thumbnail:
janluca._mtb?ig...
I'm getting more active on Instagram now:
janolebroeske?i...
Cheers
Jan Ole
@t.b.9389 2 жыл бұрын
Danke schön für die Beitrag!
@dancing8595 2 жыл бұрын
Great vid. Question, please -- Did you ever have a gap form between the lower linkage and the rear triangle, on the drive side of the bike? (I have a Nomad 3.) When I screw in the pivot axel bolt into the rear triangle, the tab the bolt screws into is pushed away from the linkage - leaving a 1-2 mm gap. It super tight/flush on the non-drive / bolt insertion side. If so, any solutions to fixing it? Thanks!
@JanOleBroeske 7 ай бұрын
I haven't. I'm afraid I can't help you then...
@diegofranco1999 6 ай бұрын
Thank you so much Jan, tonight I started the process on my Hightower 2023! Amazing! Ilustrative and well done. Just one question, the music is awasome. Name please?
@JanOleBroeske 6 ай бұрын
Use shazam to get the musics name haha. I don't even now the names myself. Lost the premiere pro project to check...
@parkermackenzie9848 11 ай бұрын
I like bikes.
@Pf0sti 2 жыл бұрын
Good Job. Welche Tools benutzt du hier zum einpressen?
@JanOleBroeske 2 жыл бұрын
Danke! Das Einpresswerkzeug ist von Reset Racing. Da kann man die Aufsätze direkt passend für die jeweiligen Lagergrößen dazu kaufen.
@joegonz1983 11 ай бұрын
Hey great video! In average how much time it took you to complete all that process ?
@JanOleBroeske 11 ай бұрын
Thanks mate! I guess about 3 hours
@joegonz1983 11 ай бұрын
@@JanOleBroeske thank you. I’m asking to have an estimate on how much time I’ll have to wait for my Tallboy to be done. I had to filed a warranty claim on the rear triangle and the process you are showing is pretty much the same.
@thomasgehrmann5010 2 жыл бұрын
Das Video hab ich gebraucht! Ich wusste nicht, wie ich die Lager einpressen soll, ohne ein Werkzeug von 300-800€. Fahre auch das Megatower und muss alle Lager wechseln, da der Hinterbau totales Spiel hat. Zu dem Werkzeug habe ich noch eine Frage: was brauche ich genau für die Einpressung der 6900 und 6902er Lager? Benötige ich zwei Druckstücke um beide Lager 6902 gleichzeitig reinzupressen? Ich würde mir das Grundwerkzeug #8069, die Hülsen #8200 und #8203 und jeweils ein Druckstück #8209 und #8216 bestellen. Oder eben zwei Druckstücke? Ok, die 6900 oben am Upper-Link werden einzeln reingepresst. Aber die anderen eben gleichzeitig. Danke schonmal! 👍
@JanOleBroeske 2 жыл бұрын
Ich weiß nicht was du mit gleichzeitig meinst. Habe ja alle Lager einzeln eingepresst
@thomasgehrmann5010 2 жыл бұрын
@@JanOleBroeske ok, durch den Schnitt des Videos kam das nicht so rüber. Alles klar. 👌 Dann werde ich mir mal das Werkzeug bestellen.
@michi6788 2 жыл бұрын
Wie viel nm nimmst du für die rahmen schrauben bzw wo her weißt du diese ?
@JanOleBroeske 2 жыл бұрын
Gibt bei Santacruz auf der Website nen pdf Dokument, da steht alles drin
@mitchellmtb7202 Жыл бұрын
What was the point of taking the brake lines out only to put them back in? Or taking those crappy sram brakes off and not replacing them with Maguras.
@JanOleBroeske Жыл бұрын
Don't want the reartriangle hanging around... Did it the other way around😂
@damiansmith930 Жыл бұрын
What brake calliper mount is on the rear?Thank you
@JanOleBroeske Жыл бұрын
A Trickstuff one PM23
@45graham45 Жыл бұрын
Isn't it better to put threadlock on the female threads in the frame rather than on the male threads on the bolts? if you put it on the bolt threads then as you insert the bolt then some thred lock will be tranferred to the inner bearing surfaces.
@JanOleBroeske Жыл бұрын
Never had an issue doing it that way
@krish-bg1xg 2 ай бұрын
nice video, could you make one like this with spz enduro
@JanOleBroeske 2 ай бұрын
Thank you! Unfortunately I don't have it anymore...
@macreyes9474 Жыл бұрын
May i know what type/brand of grease you were using?
@JanOleBroeske Жыл бұрын
Muc Off
@harel586 2 ай бұрын
Do you just know how much NM to use at each bolt or you have instructions? Santa cruz dont write the nm on their bolts for some reason
@JanOleBroeske 2 ай бұрын
Go on their website, then search the Megatower in the bike archive
@swx0932 2 жыл бұрын
Was für Drehmomentschlüssel ist das?
@JanOleBroeske 2 жыл бұрын
Von Topeak
@SNS1212 2 жыл бұрын
What kind of grease are you using?
@JanOleBroeske 2 жыл бұрын
Muc Off
@SNS1212 2 жыл бұрын
@@JanOleBroeske Thanks, I have to do the same service!
@JanOleBroeske 2 жыл бұрын
@@SNS1212 Yea, for the lowerlink grease port they recommend some special 'marine grade grease' But I've always done it with the muc off stuff, know problems
@egydanis 11 ай бұрын
arent you supposed to pull a bearing out instead of hitting it with a hammer?
@JanOleBroeske 8 ай бұрын
Yea, but on some of them it isn't possible, due to the shaft between the two bearings.
@aryanthapa6146 Жыл бұрын
Do you have insta id
@JanOleBroeske Жыл бұрын
@janolebroeske
@aryanthapa6146 Жыл бұрын
@@JanOleBroeske yeah I got you :so Sick myan we are also trying to shoot video like this😍
WHOOP UCI Mountain Bike World Series
Рет қаралды 17 М.