Simple and Strong Garage Storage Shelves

  Рет қаралды 421,536

Bear Mountain Builds

Bear Mountain Builds

Күн бұрын

This is the strongest and simplest storage system you’ll ever build. This can be built in a couple hours and the design is really easy to modify to fit any sized space. This build has 405 gallons of storage with room to add more
*Project Plans*
Garage Storage Shelves Plans
www.bearmountainbuilds.com/pl...
*Products Used*
27 gallon storage bins:
amzn.to/3YcZHEX
Digital smart level:
amzn.to/47ayhDu
Kreg Pocket Hole Jig
amzn.to/3OActbD
Glue roller:
amzn.to/3HrgcW7
100'' Straight Edge Saw guide:
amzn.to/3UhCOxz
DEWALT circular saw:
amzn.to/3MCtwsz
90 degree squares:
amzn.to/3Tm5Ttd
DEWALT impact driver & drill:
amzn.to/49SAvbc
DEWALT bit set:
amzn.to/3g7ddHT
6” and 12" clamps:
amzn.to/3qbb6s0
*Filming Equipment*
www.bearmountainbuilds.com/po...
Disclosure: Links contain affiliates.
As an Amazon Associate I earn from qualifying purchases. When you buy through one of my links I will receive a commission. This is at no cost to you.
Thank you for supporting Bear Mountain Builds and allowing us to continue to bring you valuable content.
*Bear Mountain Builds Things*
Instagram: / bearmountainbuilds
Facebook: / bear-mountai. .
Bear Mountain Builds (Free Plans): www.bearmountainbuilds.com/
Patreon: patreon.com/BearMountainBuilds

Пікірлер: 334
@someguynj
@someguynj Жыл бұрын
Where did you find the world's straightest pile of 2x4's?
@BearMountainBuilds
@BearMountainBuilds Жыл бұрын
Can’t say they were the straightest I’ve ever used. There were a number that were bowed or twisting but this design forces that out of them
@someguynj
@someguynj Жыл бұрын
@@BearMountainBuilds Nice. It looked so uniform in the shot where you had all your cut pieces laid out, I was just thinking mine never look that good. Great video!
@chrisnagorka2776
@chrisnagorka2776 9 ай бұрын
At the Home Depot in a reject pile section. They sell only twisted and bowed once there so whenever they come across straight one they putting in a reject pile😁
@lopaka76
@lopaka76 9 ай бұрын
I found a 2x4 at home Depot that was perfect and I mean perfect. No twist, no bow, no knots, no chipped ends, no dents. I told my brother, I almost hate to use it.
@someguynj
@someguynj 9 ай бұрын
@@lopaka76 hahaha yeah I would be saving it like a trophy or for some epic build where you could feature how flawless it is.
@Ron-FabandBuild
@Ron-FabandBuild 11 ай бұрын
Good old fashion Basic Construction on the frame for weight distribution. Thanks for honoring the older methods of construction. Some methods should never be replaced. Awesome job. Thanks again.
@ssjohnny
@ssjohnny 11 ай бұрын
This is great for my use as when we moved to our retirement home a few years ago, I purchased roughly 45 of the same containers for the move. Great plan to reuse in an orderly fashion. They also look real nice/clean. Thanks!
@dylanmckenna5172
@dylanmckenna5172 11 ай бұрын
Simple. Functional. Looks Great! I could see this being a great way to build a DIY playground for kids without the worry of collapsing!
@TheChewyWun
@TheChewyWun Жыл бұрын
I needed this lap joint concept when I built a raised garden planter last year. The weight was carried side to side but nothing carried/supported the weight to the ground and 3/4 of the way through the season we lost one whole corner of it. Very smart and sturdy design.
@dronesjumpingin8308
@dronesjumpingin8308 4 ай бұрын
Thank you for sharing! My wife and I just built our first single family home and have a storage room that this design would be prefect for. Thank you for sharing the plans and having a very easy to follow video🙏
@TH1NG1
@TH1NG1 7 ай бұрын
Just started my woodworking journey back in august. finishing up my first semester now . and your channel has been the best for my growth and understanding of all that we’re doing . keep it up .
@richardkunz9004
@richardkunz9004 10 ай бұрын
Just got my shop built , got the electrical done and 1 wall insulation and boarded up plan on building my own shelves. Thanks for the advice/ tips/ suggestions! 😁
@woodworksbygrampies1284
@woodworksbygrampies1284 11 ай бұрын
Hola! 🖐Now that I've completely emptied out my two car garage in preparation to build my shop, I have to quickly organize and store all our stuff neatly and in an organized fashion before Grammy (my wife) puts the hammer down. This video is the perfect refence with which to tackle putting together some very sturdy shelves. Thanks for the video and clear explanation of the entire build. Take care and have a good one, Adios. 👊
@ericpetitclerc5519
@ericpetitclerc5519 Жыл бұрын
Family members were laughing at my "weird" lap-joint, which happen to be exactly what you did. I'll show them that your project is solid and very well designed (simplicity is a blessing). Thank you for your projects!
@BearMountainBuilds
@BearMountainBuilds Жыл бұрын
I love simple solutions
@ImDying2Live
@ImDying2Live Жыл бұрын
You can also let them know this is also the same way DIY aquarium stands are built. I built one for a 150 Gallon. Tank + Water + Decor, has to be pushing 2,000lbs.
@j.r7872
@j.r7872 11 ай бұрын
Sorry your family shamed your weird lap
@angelbear_og
@angelbear_og 7 ай бұрын
Tell them you don't worry about "weird" you worry about "wrong". Maybe that'll get 'em to shut their pieholes! 😉
@DarwinsSwagger
@DarwinsSwagger 11 ай бұрын
Always enjoy seeing a solid and very functional build! And the small lessons really come in handy, e.g. the lap joint explanation. Super simple explanation makes it super easy to understand and implement.
@mini2nut67
@mini2nut67 11 ай бұрын
Your video has made my OCD very happy. I love the simplicity and sturdiness of your shelving. I plan on duplicating your design along the entire length of my garage for super organized and neat storage. And every storage box will be labeled of course😁
@TheP0STMAN
@TheP0STMAN 11 ай бұрын
Love the build ideas. Just built one of your modular shop tables tonight. Turned out great. Going to finish the second table tomorrow. Casters and latches come in Wednesday.
@ridermak4111
@ridermak4111 11 ай бұрын
From what I’ve seen in person and on KZfaq, probably 80% of DIY garage shelves and workbenches rely only on the shear strength of screws and nails to support the vertical load. When a DIY outdoor deck gets “built” like that, people have been seriously injured or worse when it collapses. Thank you for showing how to put the vertical grain under the horizontal elements and not beside them. 🤜🤛
@DanielRichards644
@DanielRichards644 6 ай бұрын
Those DIY Decks are handling 10 times the load you are typically putting on these shelves when they collapse, I have some shelves in my garage where the back rail of the shelf (built similar to how he did his shelf frames) are screwed directly into studs with no support to the ground and the front supports are face mounted with some screws then "reinforced" with a TimberLok at each vertical support on one side of the garage and have a single shelf suspended from the ceiling using the same technique, been up and loaded for several years with no issues.
@ridermak4111
@ridermak4111 6 ай бұрын
@@DanielRichards644 I agree completely. My point was that most folks who aren’t trained in load bearing construction don’t understand the difference between safety-of-life and safety of vice / tools. 🤜🤛
@davidketterer5519
@davidketterer5519 5 ай бұрын
@@ridermak4111 What he did is certainly stronger but you can save a few 2x4s by screwing the back supports of the shelves directly into studs and the front into single vertical 2x4's that that will still hold a lot of weight as I have stood on those type shelves. 100% agree on decks and other structural components but not necessary for shelving.
@ianfeltham4771
@ianfeltham4771 11 ай бұрын
Great idea, will be using this for my new home garage when we move in..thank you from the UK
@dqauto500
@dqauto500 11 ай бұрын
Love it and the use of clamps. I have the hardest time keeping things together or working on things alone because I just don’t have enough hands! I love the drill guides
@Pete4875
@Pete4875 9 ай бұрын
You do really nice work. It feels better when you do a good job rather than just slapping something together. I tend to put heavy stuff on my shelves and it makes great sense that you bring the load down to the floor. Thank You!
@MrCaprinut
@MrCaprinut 11 ай бұрын
My late dad built a shelf system just like that in our garage. Only difference it was fastned together with bolts and nuts on the non wall sides. The long beams did bow after a while due the massive weight of the cardboxes with carmagazines. I guess like length like that there was about 500lbs on each shelf. I still to this have those magazines stored at a mates garage. There was also a ton of carparts on those shelves that I would love to have today.
@anthonyrussojr
@anthonyrussojr 6 ай бұрын
Watching this is so therapeutic! Love the workmanship!
@hoorayimhelping3978
@hoorayimhelping3978 2 ай бұрын
Thank you for this video and for the free plans. I used them to build a slightly modified version of this in my garage this weekend. My first major woodworking project, I enjoyed it a ton!
@mariebagwell6314
@mariebagwell6314 Жыл бұрын
I absolutely love the drill guides. I, too, like my screws to be neat and all in the same positions!
@LinzseyslilPad
@LinzseyslilPad 8 ай бұрын
Someone made this and posted on Facebook. She commented about you. I downloaded your free and subscribed. Thanks!
@user-rg5oy5tq6g
@user-rg5oy5tq6g 8 ай бұрын
Thanks for the great build concept. It is completely scale able. I built one for the back deck yesterday and will do another one for a small garage today.
@cakeandpiday1209
@cakeandpiday1209 6 ай бұрын
Super simple to follow and adjust to my needs. Thanks, I used this to build my shelves this weekend.
@fmrana
@fmrana 2 ай бұрын
Excellent build. I love ur use of incorporation of lap joints without actually cutting out the lap joints in the wood. I am sure this design is fit for purpose for my needs and will be using it for my next project. Thanks and keep up the good work and for keeping your plans free.
@sharksys
@sharksys Жыл бұрын
Excellent as usual. Appreciate this very much. I’m going to build these for my daughter’s house now!
@gene6867
@gene6867 4 күн бұрын
Very solid work, this looks like the best video on shelving I've seen so far, I think I'll build these for my wall-mounted shelving in the garage.
@williamsnow7111
@williamsnow7111 7 ай бұрын
Love your design, just what I was looking for. I had a basic idea and came to youtube to consider options. Most other builds have the legs screwing into the end grain of the shelves. Obviously this cannot be avoided for the mid span cross braces, but surely it cannot be a good practice to screw into the end grain for the main attachment point of the shelves to the legs. Great idea and great work.
@bigrich6750
@bigrich6750 11 ай бұрын
I just built some simple shelves in my shed, but yours are far better than mine. I’ll be adding these to my garage. Subscribed!
@guybowers9094
@guybowers9094 Жыл бұрын
Nice idea. They turned out great. I will need to use this setup in my storage shed when I revamp it this fall
@ohgary
@ohgary Жыл бұрын
Nothing better than time lapse video. Nice job.
@realityvsfantasy1929
@realityvsfantasy1929 8 ай бұрын
Great video. I also use this technique when building shelving systems throughout my home. One suggestion i follow; I don’t allow the wood to directly contact the concrete flooring. I use either a Simpson tie base platform or I make a platform or spacer from pvc boards for same.
@BenyBenator
@BenyBenator 6 ай бұрын
These look like just what I was looking for our basement laundry room. I downloaded the plans! Thanks!
@alexteixeira27
@alexteixeira27 11 ай бұрын
I am addicted to organizing and always building shelving. I have watched almost every single video of building shelving on KZfaq for entertainment, your design simplicity is by far the best really enjoyed it. Only thing to make perfection is to add glue in every single joint, and only 2 bolt to hold it to wall make faster for moving around later.
@BearMountainBuilds
@BearMountainBuilds 11 ай бұрын
I was originally planning on glueing but decided to not so I could take disassemble the shelves and move them if I needed to
@timenos2557
@timenos2557 8 ай бұрын
Thanks for the plans! Followed them pretty much exactly with a couple of exceptions.
@boudibla4011
@boudibla4011 9 ай бұрын
thanks for the another good building idea: simple, structurally sound, pocket screws are neat. I built the shop bench and I think I will give the storage shelves a try next.
@PaganWizard
@PaganWizard 11 ай бұрын
As always, great project, great presentation, and TYVM for freely sharing your plans, not many here are willing to do that.
@POW2000
@POW2000 9 ай бұрын
This video makes me want to build a storage shelf for my garage and get organized!
@searchingfor6thgear44
@searchingfor6thgear44 7 ай бұрын
Perfect timing! Once I finish sheeting the garage I need to add storage👍
@stevencain4804
@stevencain4804 2 ай бұрын
Great, strong build. I watched a few different vids prior to making my choice and will go with your. THANK YOU!!
@LukePighetti
@LukePighetti 10 ай бұрын
Going to build this but will replace the double thick legs with single and nail everything together with a framing nailer and make it a full 8 feet wide with six legs. Thanks for the inspiration!
@dennissmith5837
@dennissmith5837 7 ай бұрын
Nice video. An additional video about what kind of things you store in the totes, how it is divided and how or if it is labeled to make locating things easier.
@4dchessplayer516
@4dchessplayer516 9 ай бұрын
I have the same setup, however I have an angled 45 degree lip at the end so you can slide out the totes and look in them without taking them down. Good for more frequent usage
@TheMadEnglishman
@TheMadEnglishman 9 ай бұрын
Lovely vid, thank you. I have built those shelves but with a slight variation. If the two end cross pieces are cut 4" longer than the two inner cross pieces, the end pieces can then sit outside the end of the shelf long pieces rather than inside. Then, those ends of the shelf bear all of their weight on the vertical spacers (as yours do) but the cross piece is included in having the weight carried by the spacer rather than the screws. You also gain 8" of shelf length within the same overall footprint. Finally, the shelf covering (in my case 1/2" ply) is installed on each shelf before the next set of spacers. Just means no notching the covering around them. Hope that makes sense, and thanks again for the vid!
@markbaker5167
@markbaker5167 7 ай бұрын
I didn't quite get it
@weezahriah
@weezahriah 7 ай бұрын
I'm so visual I need to see it....
@hoorayimhelping3978
@hoorayimhelping3978 2 ай бұрын
@@markbaker5167 The outer-most cross pieces, the parts that he installed at 3:30, are not spaced with the 2x4 off cut pieces. Instead, they go where he has the clamps at the part, on the end of the long 2x4s. They're cut a different length, so that their edges are flush with the long 2x4s.
@eddieimparato
@eddieimparato 9 ай бұрын
Appreciate you for the time and demo + the download! Subscriber for life.
@nancymills3381
@nancymills3381 7 ай бұрын
Now this makes more sense to hold a lot of weight I like the way you made them!
@JAdams-qy7ii
@JAdams-qy7ii 5 ай бұрын
Simply perfect, perfectly simple. THANK YOU!
@tortiz411
@tortiz411 6 ай бұрын
was able to build this over the weekend thanks to you. i plan to tackle your miter station next! thank you for the free plans - subscribed and look forward your future builds.
@joshbur2560
@joshbur2560 3 ай бұрын
Thank you! Used this template and modified it a bit for my needs. Great sturdy shelf!
@ekhoromeo
@ekhoromeo 4 ай бұрын
Great build! I built mine the same way, except I hadn't bought my kreig jig at the time. (Used my nail gun). Super strong and sturdy!
@olando1187
@olando1187 Жыл бұрын
Another great video! Glad to see you post again. Excited for more!
@gregmize01
@gregmize01 Жыл бұрын
smart, simple, cheap and scalable!!!! Nice work and thanks!
@richardmoller9242
@richardmoller9242 10 ай бұрын
Great ideas. I may be actually able to get my basement and garage organized now 🙂
@rickcotto3213
@rickcotto3213 6 ай бұрын
Loved the video, you made it look so easy, now im going to redo my garage, thanks keep up the great work
@abe677
@abe677 11 ай бұрын
I really like this design. My kind of woodworking. Would enjoy watching a video on a similarly simple outside potting bench.
@DjmMik
@DjmMik Жыл бұрын
I love your channel. Your projects are always well thought out and look great 👍🏻
@bishopadvisorygroup656
@bishopadvisorygroup656 Ай бұрын
Awesome build! I’m going to modify my current shelving unit.
@msantos1116
@msantos1116 6 ай бұрын
Looks great! I’m about to build this with modified dimensions to make some more basement storage.
@mikenienaber1012
@mikenienaber1012 6 ай бұрын
I am going to give it a try. Just downloaded your plans. Thank you
@landygocong3323
@landygocong3323 9 ай бұрын
You're amazing bro! Thank you for sharing your knowledge.
@Dynamic_Custom_Woodworking
@Dynamic_Custom_Woodworking 9 ай бұрын
Thank you for the video and the plans this fits my plan for my shop.
@AngieWilliamsDesigns
@AngieWilliamsDesigns Жыл бұрын
Looks great. Looks rock solid. And easy to build alone.
@user-bn7xs5dz6b
@user-bn7xs5dz6b Жыл бұрын
I enjoy your channel. Your projects are fun and useful!
@jeanchance9334
@jeanchance9334 Жыл бұрын
Thank you so much for the free I traction you offer through your website. That is very thoughtful of you.I like your simple to understand instructions I am ordering your plans to build garage she5
@MiCrazyCasa
@MiCrazyCasa 7 ай бұрын
Awesome work. Me being lazy, I’ll stick to industrial plastic or steel ones from Costco. I wish I could get furniture made to your calibration of work.
@jimrosson6702
@jimrosson6702 Жыл бұрын
Great build great simple idea thanks for sharing
@fitz394
@fitz394 Ай бұрын
Nice and simple. Thanks man
@biedawo
@biedawo 8 ай бұрын
I've done a similar build with the lapped joints. Over time, the rails continued to dry out and shrunk a bit so that the spacer supports were no longer directly supporting them; only supported by the sheet strength of the screws.
@scottdecristo1984
@scottdecristo1984 8 ай бұрын
I was thinking it might make more sense to not screw in the ends in between the spacers and let them sit freely and screw in a stopping block at the very ends
@Zzangjuju
@Zzangjuju 9 ай бұрын
I needed this!! Thank you so much!
@-_-John-_-
@-_-John-_- 6 ай бұрын
Well... I've done carpentry, finish carpentry and woodworking professionally for over 40 years and this is the first time I've ever seen anyone pre-drill OSB and pine 2x4s used for garage shelves. Its also the first time I've seen someone use pocket holes in this situation as well. To each their own.
@ChaseTruCutLawn
@ChaseTruCutLawn 7 ай бұрын
Awesome, thanks for the plans!
@Jeena88
@Jeena88 11 ай бұрын
Watching from Philippines❤ Love to watch your channel cause, people like me new learner as a furniture builder, you make it easy for me to follow your details. You give us, how many pieces to cut every section, size and etc. ❤❤❤ Next time bed frame. 👍
@BearMountainBuilds
@BearMountainBuilds 11 ай бұрын
Actually a bed frame will be coming this fall!!
@Jeena88
@Jeena88 11 ай бұрын
@@BearMountainBuilds I will be watching it. Thank you...
@kerilaforge9071
@kerilaforge9071 10 ай бұрын
This is fantastic looking oh wow! Also, not for nothing, you're quite nice to look at too :)
@joshmoreno6109
@joshmoreno6109 4 ай бұрын
Just subscribed! I loved this!
@officialhomereviews
@officialhomereviews 6 ай бұрын
I just built a similar shelf. Was a LOT more difficult than this and doesn't look near as good as yours. Glad I found your channel, just wish it was sooner 🙃🙃
@whirledpeaz5758
@whirledpeaz5758 11 ай бұрын
The hollows on either end can be use to hang long handled items such as lawn and garden tools, extension cords, maybe even bikes.
@BearMountainBuilds
@BearMountainBuilds 11 ай бұрын
That’s a great idea! I wish I had thought of that and added it to the video
@_Rick_S
@_Rick_S 11 ай бұрын
Great design on this, actually has more strength to carry the load than mortise and tenons would but it's dead simple, that frame could be made just as well with as little as a circular saw and a speed square
@aaaaaa67a
@aaaaaa67a 11 ай бұрын
Excellent work thanks
@brianvannorman1465
@brianvannorman1465 9 ай бұрын
Nice. Thank you for the idea.
@calokent411
@calokent411 11 ай бұрын
Looks solid and awesome 👍🏼 Great explanation overall! What more could you ask for? Thanks!
@mrmanu20121
@mrmanu20121 11 ай бұрын
Great job !!
@samkarr7610
@samkarr7610 4 ай бұрын
These are awesome. Have you ever thought about closing the sides with chip board and making shelves between the braces to hold screws and spray paint and stuff. Love watching you work.
@BearMountainBuilds
@BearMountainBuilds 4 ай бұрын
Good idea to use more of the space!
@JeremyB8419
@JeremyB8419 11 ай бұрын
Just FYI, Lowe's sells similar 27 gallon storage bins (near identical) made by Project Source for $12 each. The ones in this video description link are almost $25 each.
@annelynn3506
@annelynn3506 10 ай бұрын
This is fabulous
@jefff6167
@jefff6167 10 ай бұрын
You produce some of the best content on KZfaq. Here’s why: Your camera work is spot on. Your shots always feature exactly what the narration is about. Lighting is perfect too. Your narration is flawless. You’re focused yet fun and natural without any distracting nonverbal utterances or off topic sidebars. Background music is right where it belongs, in the background. Your marketing chops are solid. You give plans away for free while politely asking for subscribers. You collect names and email addresses when you give plans away. Great for studying who is watching your content and for relationship building. Your audience engagement is sincere and smart. The flag connection is brilliant. I predict you’ll be a deca-millionaire by the time you’re 50. 👍🇺🇸
@BearMountainBuilds
@BearMountainBuilds 10 ай бұрын
I really appreciate the kind words! I’ll keep trying to make the best content I can!
@gregseebo9464
@gregseebo9464 6 ай бұрын
Looks great
@austinadams1647
@austinadams1647 11 ай бұрын
Time to build me one of those.
@johnwieland8441
@johnwieland8441 11 ай бұрын
terrific video!
@ImMelBell
@ImMelBell 10 ай бұрын
This is another must have in my Herage (her-raj) I'm an outta the box kinda gal lol so a SheShed wasn't for me lol Love your videos!!
@bearsstuff
@bearsstuff Жыл бұрын
I’ve got open studs in a storage shed. I think I can adapt this pattern and just use the existing studs for a couple legs.
@BearMountainBuilds
@BearMountainBuilds Жыл бұрын
Yeah that would definitely work!
@tomcoleman550
@tomcoleman550 8 ай бұрын
Nice job!!
@mattleblanc31
@mattleblanc31 2 ай бұрын
This is similar to the way I’m planning to build shelves but wanted to see other ideas. The way my buddy showed me and a big change I’d make to yours is that I’d make the ends of the shelf panel flush to the ends and put plywood on the shelf before putting the next brace. This allows edge to edge shelf for staircase that’s not bins
@BearMountainBuilds
@BearMountainBuilds 2 ай бұрын
That would work as well
@DjmMik
@DjmMik Жыл бұрын
Thanks! I have learned a lot from you.
@BearMountainBuilds
@BearMountainBuilds Жыл бұрын
Thanks so much!
@georgevprochazka5316
@georgevprochazka5316 5 ай бұрын
Nice work ! I wish I could get nice lumber like that in my "neighborhood". I live in Canada and we export the NICE lubber to the USA...
@BearMountainBuilds
@BearMountainBuilds 5 ай бұрын
Thank you for your sacrifice! Haha
@kdfleming2
@kdfleming2 11 ай бұрын
I just ordered some storage tubs identical to yours and was wondering how to organize them. Perfect design . Thanks so much.
@alfrednewman292
@alfrednewman292 7 ай бұрын
For a standard vertical stud wall I would have eliminated the two wall supports. I would have screwed the platform spacers directly to the wall. Also would have placed the platform end boards all the way to the end of the horizontal rails. For the outside supports I would have used the same setup but would have place the supports on the end of frames so as to have a smooth space. I then would have had an additional 7 inches of shelf per platform in a smaller footprint with the same degree of carrying capability with two less pieces of lumber.
@timippel9048
@timippel9048 9 ай бұрын
I've been building almost the exact same thing for a few years now as a side hustle. 1) personally, i think it's a much cleaner look to switch the spacers to the other side of the leg. The front and back are flush (horizontal supports with legs) and there's no gap between the wall and the shelf. 2) get rid of the back legs entirely. Put a couple of GRKs through the horizontal supports to secure it to the studs. Saves on lumber and time. If you build the shelf in a corner, you can get away with just building ONE leg, as opposed to 4.
@mescetacy
@mescetacy 9 ай бұрын
Whats a GRK?
@ronleyshon9668
@ronleyshon9668 19 күн бұрын
Long brass coloured screws
@WinchesterxNL
@WinchesterxNL 10 ай бұрын
Honestly, this sounds and looks like a perfect thing for me, who lives in an apartment with a small shed to store additional stuff in. Only problem is, that it's a brick wall. (European, heh.)
@elliottpeabody1287
@elliottpeabody1287 Жыл бұрын
@BearMountainBuilds - GREAT build!! I can't wait for the (free) plans!!
@followjesuschrist7828
@followjesuschrist7828 28 күн бұрын
Perfect !!!❤❤❤❤
DIY Shed and Garage Shelves: Super Simple and Cheap!
15:43
DIY PETE
Рет қаралды 324 М.
НРАВИТСЯ ЭТОТ ФОРМАТ??
00:37
МЯТНАЯ ФАНТА
Рет қаралды 1,6 МЛН
100❤️
00:19
MY💝No War🤝
Рет қаралды 23 МЛН
French Cleats: Simple & Modular Wall Mounted Tool Storage
16:31
Bear Mountain Builds
Рет қаралды 202 М.
FINALLY fixing my GARAGE storage problem
24:47
Michael Alm
Рет қаралды 1,2 МЛН
Hidden Inventions That Will Take Your Home to Another Level
20:22
DIY Sliding Tote Storage | Easy Build | Lots of Storage & Organization!
14:29
How To Build Mobile Garage Storage
10:52
BYOT
Рет қаралды 248 М.
How To Build A French Cleat Storage Wall
11:29
The BeefMaster
Рет қаралды 817 М.
How to make fast, sturdy shop shelving.
9:03
Rex Krueger
Рет қаралды 151 М.
Some muslims mistakes #muslimfemale #hijab
0:11
Asel Mustafaeva
Рет қаралды 14 МЛН
Always wear good shoes outside! ⚠️💀
0:20
scottsreality
Рет қаралды 7 МЛН
Жду в тг: @kedrovaalyona
0:59
Кедрова Алёна
Рет қаралды 2 МЛН